Question about Cars & Trucks

Open Question

1996 chevy cavalier P1870 codes - Cars & Trucks

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Molson02536
  • 3854 Answers

SOURCE: i need the factory audio color codes diagram for

Car Radio Constant 12v+ Wire: Orange 
Car Radio Switched 12v+ Wire: Yellow 
Car Radio Ground Wire: Black 
Car Radio Illumination Wire: Gray 
Car Stereo Dimmer Wire: Brown 
Car Stereo Antenna Trigger: Pink 
Car Stereo Amp Trigger Wire: N/A 
Car Stereo Amplifier Location: N/A 
Front Speakers Size: N/A 
Front Speakers Location: N/A 
Left Front Speaker Positive Wire (+): Tan 
Left Front Speaker Negative Wire (-): Gray 
Right Front Speaker Positive Wire (+): Light Green 
Right Front Speaker Negative Wire (-): Dark Green 
Rear Speakers Size: N/A 
Rear Speakers Location: N/A 
Left Rear Speaker Positive Wire (+): Brown 
Left Rear Speaker Negative Wire (-): Yellow 
Right Rear Speaker Positive Wire (+): Dark Blue 
Right Rear Speaker Negative Wire (-): Light Blue 

Good luck and hope this helps

Posted on Apr 20, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 chevy luminas failed smog/ P1870 What's that it drives GREAT


That is a code only used on GM cars. It is an indication of transmission slippage.

Nov 21, 2017 | Cars & Trucks

1 Answer

How to fix 1999 Chevy Cavalier with a P 1870 code


As far as the oil light on at idle an going off with more rpm's , worn engine bearings , oil pump ! How many miles on it ? P1870 Chevrolet Transmission Component Slipping Look's like you need a new vehicle !

Nov 26, 2016 | Cars & Trucks

1 Answer

My 2002 gmc wont shift and code p1870 came up it will stay im low gear


You can replace the transmission valve body as per the instruction or install a new TCC apply valve kit. However the installation requires for the valve body to be removed and honed out by a special tool. I wouldn't recommend this procedure unless you have the proper tools and the know how about the inner workings of the automatic transmissions.

#01-07-30-023B: Harsh 1-2 Upshift, SES, MIL, or CEL Illuminated, DTC P1870 Set (Replace Valve Body) - (Mar 22, 2002)
Subject: Harsh 1-2 Upshift, SES, MIL, or CEL Illuminated, DTC P1870 Set (Replace Valve Body)
Models: 1996 Buick Roadmaster
1996 Cadillac Fleetwood
1999-2000 Cadillac Escalade
1996-2000 Chevrolet Camaro, Corvette
1996-2000 Pontiac Firebird
1996-2000 Chevrolet and GMC Light Duty Truck Models
1996-2000 Oldsmobile Bravada
with 4L60-E Automatic Transmission (RPO M30)
Built Prior to January 15, 2000 (Julian Date 0015)

This bulletin is being revised to update VIN Breakpoint Date information and revise the Parts Information table. Please discard Corporate Bulletin Number 01-07-30-023A (Section 07 -- Transmission/Transaxle).

Condition: Some customers may comment on a harsh 1-2 upshift and the Check Engine Light or Service Engine Soon indicator is illuminated.

Diagnosis: Typically, these vehicles will have been driven more than 32,000 km (20,000 mi) before this condition occurs.

The scan tool may show a DTC P1870 set as a history code.

A harsh 1-2 shift or DTC P1870, caused by wear in the control valve body, may be difficult to duplicate when the transmission temperature is below 93°C (200°F).

Cause: The condition may be due to wear in the control valve body. This wear occurs in the bore that contains the TCC isolator and regulator valves, and results in poor, or no, TCC apply.

Important:
• DTC P1870 is a type B code. The conditions for setting the P1870 DTC must occur on TWO CONSECUTIVE TRIPS (ignition cycles, with a drive cycle) before setting a P1870 history code.
• When the conditions for setting DTC P1870 are met (first trip), the PCM commands maximum line pressure and harsh 1-2 shifts are the result.
• This may result in a harsh 1-2 shift with no history code if the conditions for setting the DTC required for the second trip are not met, on two consecutive trips (Ignition cycles, with a drive cycle).
• When the conditions for setting the DTC are met, on the second consecutive trip, a DTC P1870 is stored as a history code.
• When the P1870 code is stored, the PCM will turn on the Service Engine Soon (SES), Check Engine Light (CEL), or Malfunction Indicator Lamp (MIL).

Correction: Install a control valve body with the revised TCC regulator and isolator valves. Refer to the Parts Information table below. These valves are used in all transmissions produced after January 15, 2000 (Julian Date 0015), and all of the service parts currently available through GMSPO contain revised TCC regulator and isolator valves.

Important: If all of the following conditions are true, it is not necessary to rebuild the transmission or to replace additional transmission components beyond the control valve body.
• Transmission operation is normal before the transmission reaches operating temperature, or before DTC P1870 is set (no slips, flares, or missing gears).
• The torque converter is not blue or overheated.
• The transmission fluid is not burned or has no burned odor.
• The transmission fluid pan contains no abnormal debris (clutch material, bronze, brass, or metal fragments).

Keep us updated.

Oct 06, 2011 | Cars & Trucks

1 Answer

Code p 1870 came up and truck wont shift


You can replace the transmission valve body as per the instruction or install a new TCC apply valve kit. However the installation requires for the valve body to be removed and honed out by a special tool. I wouldn't recommend this procedure unless you have the proper tools and the know how about the inner workings of the automatic transmissions.

#01-07-30-023B: Harsh 1-2 Upshift, SES, MIL, or CEL Illuminated, DTC P1870 Set (Replace Valve Body) - (Mar 22, 2002)
Subject: Harsh 1-2 Upshift, SES, MIL, or CEL Illuminated, DTC P1870 Set (Replace Valve Body)
Models: 1996 Buick Roadmaster
1996 Cadillac Fleetwood
1999-2000 Cadillac Escalade
1996-2000 Chevrolet Camaro, Corvette
1996-2000 Pontiac Firebird
1996-2000 Chevrolet and GMC Light Duty Truck Models
1996-2000 Oldsmobile Bravada
with 4L60-E Automatic Transmission (RPO M30)
Built Prior to January 15, 2000 (Julian Date 0015)

This bulletin is being revised to update VIN Breakpoint Date information and revise the Parts Information table. Please discard Corporate Bulletin Number 01-07-30-023A (Section 07 -- Transmission/Transaxle).

Condition: Some customers may comment on a harsh 1-2 upshift and the Check Engine Light or Service Engine Soon indicator is illuminated.

Diagnosis: Typically, these vehicles will have been driven more than 32,000 km (20,000 mi) before this condition occurs.

The scan tool may show a DTC P1870 set as a history code.

A harsh 1-2 shift or DTC P1870, caused by wear in the control valve body, may be difficult to duplicate when the transmission temperature is below 93°C (200°F).

Cause: The condition may be due to wear in the control valve body. This wear occurs in the bore that contains the TCC isolator and regulator valves, and results in poor, or no, TCC apply.

Important:
• DTC P1870 is a type B code. The conditions for setting the P1870 DTC must occur on TWO CONSECUTIVE TRIPS (ignition cycles, with a drive cycle) before setting a P1870 history code.
• When the conditions for setting DTC P1870 are met (first trip), the PCM commands maximum line pressure and harsh 1-2 shifts are the result.
• This may result in a harsh 1-2 shift with no history code if the conditions for setting the DTC required for the second trip are not met, on two consecutive trips (Ignition cycles, with a drive cycle).
• When the conditions for setting the DTC are met, on the second consecutive trip, a DTC P1870 is stored as a history code.
• When the P1870 code is stored, the PCM will turn on the Service Engine Soon (SES), Check Engine Light (CEL), or Malfunction Indicator Lamp (MIL).

Correction: Install a control valve body with the revised TCC regulator and isolator valves. Refer to the Parts Information table below. These valves are used in all transmissions produced after January 15, 2000 (Julian Date 0015), and all of the service parts currently available through GMSPO contain revised TCC regulator and isolator valves.

Important: If all of the following conditions are true, it is not necessary to rebuild the transmission or to replace additional transmission components beyond the control valve body.
• Transmission operation is normal before the transmission reaches operating temperature, or before DTC P1870 is set (no slips, flares, or missing gears).
• The torque converter is not blue or overheated.
• The transmission fluid is not burned or has no burned odor.
• The transmission fluid pan contains no abnormal debris (clutch material, bronze, brass, or metal fragments).

Keep us updated.

Oct 06, 2011 | Cars & Trucks

3 Answers

P1870 code what does it mean


This GM service bulliten might apply to your vehicle:

TSB # 01-07-30-023A
Harsh 1-2 Upshift, SES, MIL, or CEL Illuminated, DTC P1870 Set (Replace Valve Body)
1996 Buick Roadmaster
1996 Cadillac Fleetwood
1996-2000 S10 Blazer
1999-2000 Cadillac Escalade
1996-2000 Chevrolet Camaro, Corvette
1996-2000 Pontiac Firebird
1996-2000 Chevrolet and GMC Light Duty Truck Models
1996-2000 Oldsmobile Bravada
with 4L60-E Automatic Transmission (RPO M30)
Built Prior to January 15, 1999 (Julian Date 9015)
This bulletin is being revised to update the Parts Information

Please discard Corporate Bulletin Number 01-07-30-023 (Section 07 -- Transmission/Transaxle).
Condition
Some customers may comment on a harsh 1-2 upshift and the Check Engine Light or Service Engine Soon indicator is illuminated.
Diagnosis
Typically, these vehicles will have been driven more than 32,000 km (20,000 mi) before this condition occurs.
The scan tool may show a DTC P1870 set as a history code.
A harsh 1-2 shift or DTC P1870, caused by wear in the control valve body, may be difficult to duplicate when the transmission temperature is below 93°C (200°F).
Cause
The condition may be due to wear in the control valve body. This wear occurs in the bore that contains the TCC isolator and regulator valves, and results in poor, or no, TCC apply

Important
DTC P1870 is a type B code. The conditions for setting the P1870 DTC must occur on TWO CONSECUTIVE TRIPS (ignition cycles, with a drive cycle) before setting a P1870 history code.
When the conditions for setting DTC P1870 are met (first trip), the PCM commands maximum line pressure and harsh 1-2 shifts are the result.
This may result in a harsh 1-2 shift with no history code if the conditions for setting the DTC required for the second trip are not met, on two consecutive trips (Ignition cycles, with a drive cycle).

When the conditions for setting the DTC are met, on the second consecutive trip, a DTC P1870 is stored as a history code.
When the P1870 code is stored, the PCM will turn on the Service Engine Soon (SES), Check Engine Light (CEL), or Malfunction Indicator Lamp (MIL).
Correction
Install a control valve body with the revised TCC regulator and isolator valves. These valves are used in all transmissions produced after January 15, 1999 (Julian Date 9015), and all of the service parts currently available through GMSPO contain revised TCC regulator and isolator valves.

Important
If all of the following conditions are true, it is not necessary to rebuild the transmission or to replace additional transmission components beyond the control valve body.

Transmission operation is normal before the transmission reaches operating temperature, or before DTC P1870 is set (no slips, flares, or missing gears).
The torque converter is not blue or overheated.
The transmission fluid is not burned or has no burned odor.
The transmission fluid pan contains no abnormal debris (clutch material, bronze, brass, or metal fragments

Jun 18, 2010 | 1998 GMC Jimmy

1 Answer

Code p1870 1996 buick roadmaster


P1870= transmission component slipping..detected a slip there are a number of reasons this may occur..were there any other codes or just that one...If there were a bunch of other codes it may have fooled the computer into thinking there were components slipping ....I would clear the code and see if it reoccurs..While code is present you may find it shifts harder ..and possibly will not go into 4th gear or overdrive..good luck

Apr 01, 2010 | 1996 Buick Roadmaster

1 Answer

1996 chevy cavalier DIAGNOSTIC CODES


TCC is torque converter clutch circuit which helps tranny shift smoother and is in front off tranny.
$250
Random cyl miss. Most likely bad plug wire or faulty coil pack $45
Transmision pressure switch sends info to computer about tranny pressure and the switch controls it. $400

Aug 27, 2009 | 1996 Chevrolet Cavalier

1 Answer

1996 chevy lumina 3.4. service engine light on


You will need to replace the valve body in the transmission.

Mar 01, 2009 | 1996 Chevrolet Lumina Mini

2 Answers

1996 chevy 1870 o bd code transmisson fine


I had the same problem with a 1996 Camaro. GM service bulletin #01-07-30-023A. You will have to replace the valve body. Will cost around $600.00 to fix. The condition is due to wear in the bore that contains the TCC isolator valve, causes poor are no torque converter lockup

Dec 01, 2008 | 1996 Chevrolet Camaro

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

77202 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...