Question about 1984 BMW 7 Series

Open Question

Replace starter 1984 BMW 733i - 1984 BMW 7 Series

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 219 Answers

SOURCE: no spark on a 1984 BMW 733i 3.2 litre good

Have you checked for spark out of the spark plug wires and out of the coil wire? Also, I would recommend checking for battery voltage at the coil. If your crank sensor and engine electronics (DME) are ok, I would suspect the secondary ignition components. Also, don't rule out a bad rotor button or cap. Make sure you do not have any oil inside the distributor cap.

Posted on Mar 15, 2009

Ad
yotaguy
  • 232 Answers

SOURCE: to replace rockerarm,do i need to remove the head?first 1 left side facing the car.

You should only have to remove the rocker assembly,the head bolts ussually hold the assembly on,but even if you remove them the head gasket will stay sealed.You'll have to get the torque specs and bolt down sequence,and check to see if its recomended to replace the head bolts.When you dissassemble the rocker assembly lay the parts out in sequece and reassemble in the correct order.Hope this helps.

Posted on Apr 23, 2009

  • 254 Answers

SOURCE: 1984 733i repair manual

5 Series Haynes is OK.

What are you working on?

a.l9609@gmail.com

Posted on May 21, 2009

  • 427 Answers

SOURCE: Need to take the driver's seat out of a 1984 BMW

There are 4 bolts under seat they are kind of hard to get to but use a ratchet wrench ant dont give up they will come out.

Posted on Apr 27, 2010

jonathanh356
  • 75 Answers

SOURCE: i have a jammed trunk on my 1984 bmw 733i. Any

You should be able to remove the rear seat and access the trunk from the interior.

Posted on May 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1984 BMW 733i engine idles rough then yesterday engine turns over but will not start , acts like its not getting fuel . Charged battery then tried again noticed backfire from air-flow meter (3)x , this is...


No, get a new fuel pump relay...it is the seven pin tall one under the plastic cover it cost about 30-120.00 $ get it from Autohausaz for cheap

Cheers

Sep 06, 2010 | 1984 BMW 7 Series

1 Answer

Bought a 1984 BMW 733i and the master key works on the trunk, as it should, but neither the ignition key (works in ignition only) nor the trunk key will lock the car doors. What's up?


u need to go to the deal ship it 57 buks for a new codit master key i need two spider gears for the rear end and the dealer dont have them whats up

Aug 17, 2010 | 1984 BMW 7 Series

1 Answer

Need to take the driver's seat out of a 1984 BMW 733i to attach a racing harness. Not sure how to get it out.


There are 4 bolts under seat they are kind of hard to get to but use a ratchet wrench ant dont give up they will come out.

Apr 27, 2010 | BMW 750 Cars & Trucks

1 Answer

To replace rockerarm,do i need to remove the head?first 1 left side facing the car.


You should only have to remove the rocker assembly,the head bolts ussually hold the assembly on,but even if you remove them the head gasket will stay sealed.You'll have to get the torque specs and bolt down sequence,and check to see if its recomended to replace the head bolts.When you dissassemble the rocker assembly lay the parts out in sequece and reassemble in the correct order.Hope this helps.

Apr 23, 2009 | 1984 BMW 7 Series

1 Answer

No spark on a 1984 BMW 733i 3.2 litre good computer all it does is crank good cranksensor


Have you checked for spark out of the spark plug wires and out of the coil wire? Also, I would recommend checking for battery voltage at the coil. If your crank sensor and engine electronics (DME) are ok, I would suspect the secondary ignition components. Also, don't rule out a bad rotor button or cap. Make sure you do not have any oil inside the distributor cap.

Mar 13, 2009 | 1984 BMW 7 Series

1 Answer

1984 733i repair manual


5 Series Haynes is OK.

What are you working on?

a.l9609@gmail.com

Jun 03, 2008 | 1984 BMW 7 Series

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top BMW Experts

Frankie B

Level 2 Expert

65 Answers

Fred Sops

Level 2 Expert

272 Answers

Doberman

Level 2 Expert

254 Answers

Are you a BMW Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...