Question about 2000 Jeep Wrangler

1 Answer

My radio , blinkers and gauges don't work with the key on

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 937 Answers

A smoking engine could be to an oil problem or a cooling problem in the engine, the radio not working may be wires got burned-----------------------------------------------------------------------------------
auto hid xenon light

Posted on Jan 21, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1991 celica and for some reason the front signals does not work at all. When I turn on the blinkers it blink really fast on both sides but hazard light works fine it blinks normal but it...


check the main earth wire near the battery. and one near the rear of the lights. unbolt them and clean the connectors up put some grease on them after. then check again. remember that when the earth wires come off the radio code will be needed to reset the the radio. be safe and take the battery off.

Sep 28, 2013 | Cars & Trucks

1 Answer

I own a 2001 Chevy unpalatable and it work fine and everything but the blinkers don't wanna seem to work properly its like 95% they don't work as for the other 5% the blinkers only wanna work when...


Make sure all outside blinkers are flashing at one speed, if not check the bulbs and all connections, If that doesn't work check flasher

May 09, 2013 | Cars & Trucks

1 Answer

2001 Chev Malibu. Turn key on to start car, won't start. No warning lights on no lights on gauge panel. Radio works, dome light work.


check the ground leg to your engine.. it runs off the neg. battery terminal. will connect to frame and engine.. pull it off, wire brush it put it back.. you radio will work, 'cause it draws much less current, and is grounded in dash.

Jan 11, 2013 | 2001 Chevrolet Malibu

1 Answer

I have a 1990 sx corolla the car won't start the reds on the dash don't even appear but my headlights work and the blinkers the battery is fine and i just changed the altinator what else could


If the warning lights do not come on and the car will not start, I would guess the key switch has failed or a major fuse is blown.
I would check the fuses first, then for power at the key switch.

Sep 16, 2012 | 1990 Toyota Corolla

1 Answer

Why is it when i turn the key foward radio don't work and truck won't fire but when you turn the key backwards the radio comes on


You don't say what kind of vehicle we are talking about, but it is safe to assume your ignition switch needs to be replaced.

Feb 05, 2012 | Cars & Trucks

1 Answer

Pontiac sunfire interior lights, horn and blinkers do not work


They are talking about the body control module, but I'm not sure they are right. The horn does not need the bcm to work. See diagram below. The horn relay is energized by the horn switch on the steering wheel. The switch also signals the bcm, but that is not used to power the horn.

0996b43f80241a74-jnh1p0frnkt3q2fbcpfimq4v-3-0.gif
The turn signal does not use the bcm at all. The problem there may be the switch or the wire. See diagram below.



0996b43f80245517-jnh1p0frnkt3q2fbcpfimq4v-3-2.gif


The instrument lights DO REQUIRE the bcm, but can be rewired to bypass the bcm. The gray wire from the bcm in the diagram below powers the instrument lights. You can cut the gray wire and splice it to the brown wire from the multi function switch. Find the brown wire coming out the bottom of the steering column, skin some insulation off the wire and verify it has 12 volts when the parking lights are on. Do not cut the brown wire--just attach the gray wire to it. You will not be able to dim the lights, but they will come on.



0996b43f80241223-jnh1p0frnkt3q2fbcpfimq4v-3-5.gif

Aug 07, 2017 | 2005 Pontiac Sunfire

1 Answer

I have a 1990 Ford Taurus and my blinkers don't


blinkers sounds like the flasher unit is not working. It's located under dash. Also check for burnt out bulbs.
Rear defrost, or rear defogger?: Your defogger for the rear window would run off a relay, probably located in the fuse panel of your car. Often, the connections at the rear window get broke or disconnected.
Front defrost: does your heater blower work?

Oct 28, 2011 | 1990 Ford Taurus

Not finding what you are looking for?
2000 Jeep Wrangler Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

75744 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22114 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8123 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...