Question about 1994 Jeep Cherokee Country
Check the neutral safety switch and see if its bad it should be near the shifter linkage on the transmission..see if its broken or out of adjustment..
Posted on Jan 21, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I had the same problem with my 94 jeep and i ended up finding out what was causing the problem was the starter relay in the fuse box under hood, i believe its the second or third relay. Try turning the key to the start position and leave it there and poop open ur hood and manuelly start the relay
Posted on Nov 22, 2008
is it the straight six? if so first disconnect the battery then there should be 2 bolt 13 or 14 mm. take wires off. then reverse for install.
Posted on Mar 11, 2009
The alarm might have a relay to kill the ignition. Disconnect the negative or ground from the battery, wait five minutes then connect it again. This is to try and restart the alarm. Then lock and unlock the car to get the remote in sync. Try and operate your vehicle now and let me know.
Posted on May 06, 2009
This means it is the solenoid. But usually on those the starter and solenoid are one unit. They can be purchased individually, but it is usually almost as expensive as replacing the whole unit.
Posted on Aug 23, 2009
SOURCE: Jeep Cherokee starting issue
On an intermittent start problem like this you may be having a starter solenoid issue or your wire on the starter from the key switch may be loose. Or you may have a corroded battery cable or the safety neutral switch may be going bad. Is it a automatic? If it were it would be the clutch safety switch going out. So do the simple things first. Clean cables like the first guy said if that does not fix it locate the starter and if you have jumper cables the next time it does it put the positive lead of the jumper cable on the Positive battery terminal and the other touch to the starter wire with the key in the run position where the big wire on the starter is, if you here it spin it means the starter motor is ok if it don't it is bad or the connection on the starter is loose. Also a bad battery cable could cause this from the battery to the starter next put a small wire into the end of the positive jumper cable and touch the S terminal on the starter if you here a solid clung it means the solenoid is good. So check the connections on the starter and tighten the starter bolts as they may have worked loose and don't have a good ground. So if you want more as stance just post on my question and I will hell p more and if this is more informative please rate
Posted on Sep 23, 2009
Tips for a great answer:
Dec 04, 2012 | 1994 Jeep Cherokee Country
Sep 04, 2012 | 1994 Jeep Grand Cherokee
Jan 08, 2011 | 1994 Jeep Grand Cherokee
Jun 28, 2010 | 1994 Jeep Grand Cherokee
Apr 23, 2010 | 1994 Jeep Grand Cherokee
Apr 15, 2009 | 1997 Jeep Cherokee Country
Jan 08, 2009 | 1995 Jeep Cherokee 2 Door
Oct 14, 2008 | 1994 Jeep Grand Cherokee
55 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: