Question about 1991 Toyota Previa
Probably the main one. did you try the map sensor. my dad had one that he spent alot of money on and come to find out it was a $26 map sensor that plugs in on top of the motor.
Posted on Jan 21, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hey there,yeh its under the steering wheel column under the dash..it should have a 4 pin plug in it,,,,disconnect the connection to see if it has 4 pins,if it has thats it...ull get 1 in a breakers yard for about a fiver....
Posted on Apr 19, 2009
The toyota previa uses a formed silicone gasket for the valve cover and the cover is held in place by metric shoulder bolts ( 10mm). The valve gasket leaks because you can't get enough preload on the bolts to re-seat the old gasket when it gets old and shrinks. The shoulder bolts only allow you to tighten the gasket enough to seat the shoulder on the bolt. If you continue to torque down the suspected bolts, you will snap the bolt off ( don't ask me how I know this ). You can either 1.)replace the old gasket with a new one or 2.) remove the existing bolts around the leak area and put in new metric bolts that do not have a shoulder. You may want to put in a small sleeve into the existing bolt hole but shorter than the thickness of the valve cover to account for the smaller diameter bolt. You can now torque down the bolt and get enough preload to seal the valve cover without removing the old gasket. Make sure you use a torque wrench ( in-lbs) or be very careful not to snap these small valve cover bolts.
Posted on Jul 15, 2009
pop fuse cover, remove vent housing, remove speedo upper cover, remove 4 bolts holding speedo remove speedo, change bulb
Posted on Aug 17, 2010
Tips for a great answer:
Oct 06, 2013 | 1995 Toyota Previa
Aug 08, 2012 | Toyota Previa Cars & Trucks
Aug 09, 2011 | 1991 Toyota Corolla
Mar 31, 2010 | 1991 Toyota Previa
Mar 22, 2009 | 1991 Toyota Previa
305 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: