Question about 2004 Jeep Grand Cherokee
Loose battery connections or battery with bad cells. Go to Auto Zone and let them check your battery.
Posted on Jul 30, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 90 jeep starting problem
Check the crank position sensor. I had the same problem in a 1989 cherokee 4.0, and the solution was simply to acomodate the sensor wiring. No replace was necesary
Posted on Jun 11, 2009
SOURCE: Jeep Cherokee starting issue
On an intermittent start problem like this you may be having a starter solenoid issue or your wire on the starter from the key switch may be loose. Or you may have a corroded battery cable or the safety neutral switch may be going bad. Is it a automatic? If it were it would be the clutch safety switch going out. So do the simple things first. Clean cables like the first guy said if that does not fix it locate the starter and if you have jumper cables the next time it does it put the positive lead of the jumper cable on the Positive battery terminal and the other touch to the starter wire with the key in the run position where the big wire on the starter is, if you here it spin it means the starter motor is ok if it don't it is bad or the connection on the starter is loose. Also a bad battery cable could cause this from the battery to the starter next put a small wire into the end of the positive jumper cable and touch the S terminal on the starter if you here a solid clung it means the solenoid is good. So check the connections on the starter and tighten the starter bolts as they may have worked loose and don't have a good ground. So if you want more as stance just post on my question and I will hell p more and if this is more informative please rate
Posted on Sep 23, 2009
P0505 means the whole Idle Control system, not only the IAM. Check all related sensors (i.e. crankshaft sensor). Check with a voltmeter direct at the connector of the IAM if you get any signal. Remove the IAM from the TB, connect him, let someone switch your ignition key to ON. The IAM need to drive in/out for a short time to find the right position. Hold the IAM near a hard part, that they cant drive out completely! If IAM works fine, check the fuel pressure, check and clean your TB ( if not done yet). If that doesn't work, come back again please
Posted on Oct 27, 2009
What is the current status? I purchased a 2007 Jeep Grand Cherokee from CarMax in December, 2009. The first time it wouldn't start was the beginning of March. The dealership could not duplicate the issue. Happened again a month later, they said it was the wireless remote module and that was replaced. Couple months later, happened again. They said it was the key module. That was replaced. Friday night, happened again. I'm waiting for a tow truck Monday morning. Does anyone know the real underlying issue and the resolution?
Posted on Jul 11, 2010
Tips for a great answer:
Feb 23, 2013 | 1995 Jeep Grand Cherokee
Feb 16, 2013 | Cars & Trucks
Jan 17, 2013 | 1995 Jeep Grand Cherokee
Oct 06, 2011 | 1995 Jeep Grand Cherokee
Sep 07, 2011 | 1997 Jeep Grand Cherokee
Aug 15, 2011 | 1995 Jeep Grand Cherokee
Jul 19, 2011 | 1995 Jeep Grand Cherokee
Jun 24, 2011 | 1998 Jeep Cherokee
Sep 11, 2009 | 1997 Jeep Grand Cherokee
May 31, 2009 | 1996 Jeep Grand Cherokee
58 people viewed this question
Usually answered in minutes!