Question about 1986 Ford Ranger 2WD

1 Answer

86 ranger4wd 2.3 switch wont start but jump selonid it will start y?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Ford Master
  • 75,822 Answers

Defective ignition starter switch would be my guess. The switch is mounted on the bottom top of the steering column tube.

Posted on Jan 20, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2004 cadillac cts wont start only with relay jump start


What relay ? Starter relay ? Check engine light on ? Do you know how to test power and control circuit at the relay base ? where the relay plugs into ? The PCM - engine computer is suppose to energize that relay , IF it see's a input from the transmission range sensor switch (park or neutral ) or if there are no anti-theft system problems . Pull the relay and look at the bottom (where pins are ) you will see four sets of numbers . 30 & 87 and 85 & 86 .30 should have B+ voltage 87 goes down to the starter solenoid . If you used a piece of wire an jumped those two the starter should crank .(if it's good ) Pin's 86 & 85 - one should have B+ voltage and the other the ECM supply's a ground .
http://www.bbbind.com/free_tsb.html free wiring diagrams . Enter vehicle info. year , make , model and engine size . Under system click on engine then under subsystem click starting . View the starter electrical system diagram .
VEHICLE RELAYS Testing from the relay base
Starter relay works the same

Aug 25, 2017 | Cadillac Cars & Trucks

1 Answer

Why wont vehicle turn over


Is the anti-theft light lit ? Is the starter relay good ? Do you know what a relay is ? Are the battery cables good ? I would start will the starter relay circuit's if the anti-theft light is not lit.! The starter relay along with the starter relay diode is located in the battery junction box in the engine compartment. The relay is K-22 . If you pull out the relay an look on the bottom of the relay you should see four sets of numbers 30,87 an 85 ,86 . If you take a jumper wire (12-14 gage ) an jump pins 30 an 87 if the battery cables & connections are good the starter will crank . Pin's 85 &86 are the control side of the relay . One of these comes from the ignition switch when is start position an the other goes through the transmission range sensor (park neutral switch) To ground or the PCM if yours has a V-8 . Now if when you jump pins 30 & 87 an nothing happens you have bad connections or the battery cable is bad . You can go on youtube an check out videos on voltage drop testing the starter circuit .

May 25, 2016 | 2000 Ford Contour

1 Answer

Honda gx390 will not start unless the selonid is jumped although when the switch is turned off it stops.


if it only starts by jumping the solenoid then the solenoid is the problem. you will have to test the solenoid for proper voltages in and out of it on all wires.

Aug 05, 2015 | Honda Cars & Trucks

1 Answer

How do i jump my asd relay on a 03 dakota i have jumped the 87 and 30 and it is a no start situation


the sequence is in two circuits 1. pin 30 power enters relay-pin 87 power leaves relay to ign coil . 2. pin 86 power enters relay-pin 85 power exits to the PCM which then provides the earth for the ASD so you need to check the second circuit pins 86 & 85, if these are not recieving/sending power then the PCM wont provide the earth, if they are providing power then the problem lies with the PCM, hope this is of help

May 03, 2014 | Cars & Trucks

1 Answer

2000 chev wont start at key


From the ignition switch there is a yellow wire that is for the starter. probe it when trying to start. If you have no voltage replace the switch. Also, I believe there is a fusible link in the wire by the starter. It will be a different color than purple. Probe on the back side of it to see if there is voltage at start up. If so, replace with the smae color link.

Apr 10, 2014 | 2000 Chevrolet Silverado 2500

1 Answer

My 2005 suzuki aeiro wont start.battery is good . wont turn over


what transmission,?
this can be 3 things, if it wont jump and batter is good.
bad connections at battery or starter.
1: bad starter.
2: bad (A/T shift switch) or bad M/T clutch switch.
3 bad ignition switch.
4: bad wire or connections end to and start system.

hot wire the starter solenoid, if car starts (cranks) then its 2 o 3.

Apr 07, 2013 | Suzuki Cars & Trucks

1 Answer

Car won't start without a jump but battery okay


wont crank or wont start.??
no car starts , if it cant crank. (unless push starter (M/T magic)
that is not a trans sensor its the PRN switch.
ill answer for, wont CRANK !
it wont crank even with a good battery (charged) or jump started.
1: bad start
2: bad wires to same.
so hot wire the starter small wire, the key start line is tiny.
cranks. , starter good, no crank starter bad or cables bad.
if it cranks hot wired, then the key line is dead.
easy, huh?

Feb 11, 2013 | Suzuki Forenza Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

32 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...