Question about 2003 Ford ZX2

Open Question

Pcv valve replacement on 2005 mazda 3

2.3L MS

Posted by on

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ford007
  • 131 Answers

SOURCE: replace pcv valve 2005 ford freestyle

The OCV on this car is electronic and located next to the EGR valve. You must remove the trans support brace to access it.

31fcb19.png

Posted on Mar 17, 2010

  • 92 Answers

SOURCE: pcv valve

the pcv should be on the back side(firewall) of left(drivers) valve cover.

Posted on Oct 27, 2008

mitchbtu
  • 121 Answers

SOURCE: Where is pcv valve located on 2005 taurus

It is below the egr valve close to the intake manifold below the intake air sensor, there is a tube running to it from the engine to recirculate exhaust air with fresh air, there is a clamp holding it to the air intake that you need pliers to remove, then you need to turn counter-clockwise 90 degrees to remove, do the reverse to install. to make it easier to access remove the upper intake. The pcv valve is not visible, however, you can identify it by the 3" inch long rubber hose that connects to the steel line running into the bottom of the intake. I have the part and am going to replace it soon, although Ford really makes it difficult to remove it -
pcv valve is located just under the throttle body. remove air cleaner assembly from throttle body and you will see a u shaped hose running horizontally.

Posted on Jan 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Excessive pressure in the crankcase of a mazda 2005 6


Have you checked the hose from the valve cover to the air cleaner ?
The PCV valve pulls air from the crankcase into the intake, but the crankcase has to get fresh air from the air cleaner too.
If the crankcase is getting extra pressure from the cylinders you should have a check engine light and trouble codes.

Jan 15, 2013 | 2005 Mazda 6

1 Answer

Where is the pcv valve on a 2005 Mazda 3 GT 2.3L engine??


pcv valve -positive crank ventilation valves are usually located on the valve cover and have a vacuum line that leads to the intake plenum or air inlet just before the throttle body in the diagram below it is the part labeled number 1 2011-06-06_044921_pvc.gif

Oct 16, 2012 | Cars & Trucks

1 Answer

Whats needed for 2005 mazda tribute i tune up


Sparkplugs,air filter,fuel filter,PCV valve and have the injectors cleaned.

Aug 22, 2012 | 2005 Mazda Tribute

1 Answer

I cannot locate the PCV valve on my mazda tribute 2.3L 4 cylinder engine


It is below the intake manifold, you will need to remove the manifold to access the PCV valve

Jan 23, 2011 | 2005 Mazda Tribute

1 Answer

Were is the pcv valve


Don't know about a pvc valve but I know that I had a pvc hose just replaced on mine a couple of months ago. My check engine light was on

Aug 23, 2010 | 2005 Mazda MPV

3 Answers

2005 mazda 3 2.3l that is burning oil (no leaks)


possibly the pcv but check if your cars exhaust smoke is blueish or white in color if it does and your car doesnt have an oil leak then sure its burning engine oil along with fuel, the piston rings is defective, since you replaced engine oil the additive that the owner has put with the oil to prevent blowby is gone thats why it starts burning oil.....

Apr 14, 2010 | 2005 Mazda 6

2 Answers

Cant locate pcv valve on my 2005 mazda 3


Look under the intake manifold on the backside of the throttle body. If its turbocharged, you will have to pull the intercooler out to get to it.

Jan 05, 2010 | 2006 Mazda 3

1 Answer

2004 Mazda MPV vacuum line from pcv valve and


You have the wrong type hose on the pcv valvle. It isn't vacuum hose.

Nov 12, 2009 | 2004 Mazda MPV

1 Answer

Pcv valve replacement


The PCV valve is not removable from the valve rocker arm cover. The PCV valve and rocker arm cover must be replaced as an assembly.

Jun 21, 2009 | 2005 Chevrolet Equinox

Not finding what you are looking for?
2003 Ford ZX2 Logo

Related Topics:

494 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

fordexpert

Level 3 Expert

5501 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...