Question about Cars & Trucks

Open Question

Manual for valley comfort vc16 - Cars & Trucks

Posted by on

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the Goblin Valley in Colorado (not Utah!)

IT is only in Utah but it is in the Colorado River valley.

Sep 01, 2014 | Cars & Trucks

1 Answer

Texsport Valley Falls tent manual

You have this posted in the wrong product category

Jun 10, 2012 | Cars & Trucks

1 Answer

Have key broken off in ignition switch of my 89 ramcharger. whats best way to remove or to replace ignition switch?

you can use a thin scroll saw blade, or jig saw blade and grind the back side off leaving a nice little hook at the end. use two of these to grip the valleys of the key left behind. You can use other items like exacto blades or a bobby pin, the idea is to get under one of those valleys on the key and lift it out. Good luck.

Sep 21, 2011 | 1989 Dodge Ramcharger

1 Answer

Just had the valley pan replaced. strangley the belt broke and was told the power steering pump's bolts were missing. Would a mechanic need to work near the power steering pump to replace the valley pan?

please explain what you mean by valley pan ,now heard of a dog kennel and pigs tails and trunk for the boot and hood for the bonnet but this is a new one on me ,these bolts can come loose and drop out if they were loosened up for anything and not re-tightened properly but this could have been done before you bought the car ,older models with V belts can and do work loose on their own ,hence a proper service fleet vehicle style to ensure everything is correct and not a dealer style service where its profit motivated by changing everything in sight except a proper inspection

Jan 03, 2011 | BMW 7 Series Cars & Trucks

1 Answer

The motor is pinging under load. Why?

Ahh. This is actually quite easy. On any computer controlled car, to controll timing under any circumstance, "knock" or "ping" must be able to be detected. This is done by a knock sensor.
Depending on the engine size, this unit will be on the very side of the engine block or on the V-6, in the valley under the intake manifold and in the valley between the cylinder heads.

Oct 24, 2010 | 2002 Suzuki XL-7

2 Answers

BMW X-5 2003 4.4i - valley gasket - coolant leak?

Yes this and many other problems can and do happen to this engine.

Apr 19, 2017 | 2003 BMW 5 Series

1 Answer

My oldsmobile 1988 2.8l,v6 engine has a problem of oil mixing to

If you are getting oil in the radiator and coolant fill bottle, you most likely have a blown head gasket or blown intake manifold gasket. On the 2.8, there are a few other places where oil and water passages are near enough to each other for there to be a mixing of the two incompatible fluids, such as the pre-heat valve on the intake manifold, around the valley pan, etc.
If you are not comfortable with tearing into the engine to find which it is, find a good mechanic in your area. Actually, although most new car dealerships are questionable in the sales office, their repair shops are usually extremely good and reasonable in price, as compared to any other repair facility.

Feb 16, 2010 | 1987 GMC Jimmy

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

67 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides