Question about Honda Cars & Trucks

Open Question

How to replace a Retractable headlight cover 1987 Honda

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
mrhappyface
  • 205 Answers

SOURCE: Headlights on a 1991 Honda Accord

the bulb gets replaced from the back the front headlight covers do not come off .You first have to unplug the wiring connector to the bulb you are replacing which sometimes is a pain then you twist the ring that's around the bulb to unlock it from the housing then pull the bulb straight out .If the bulb your replacing is on the same side as the battery you will need to remove the battery because there wont be enough room for you to access

Posted on Feb 25, 2009

Ad
mobilityGo
  • 68 Answers

SOURCE: 1988 Honda Accord left retractable headlight, drain battery

need a new motor

Posted on Dec 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I get my retractable headlight to close on Toyota 1988 Celica. It is stuck.


Open the hood and manually raise the headlight and then it just unbolts from the body after disconnecting the wiring to the headlight assembly.

Jul 03, 2012 | Toyota Celica Cars & Trucks

1 Answer

How do I remove the headlight assembly from a 1988 honda civic hatchback? This is not a crx.


Retractable headlights must be up. Remove beauty ring (most cars it's chrome and takes a phillips screwdriver). Don't drop the screws. The retractable may have a cover instead of the beauty ring. Same; remove (with phillips?). It might take some penetrating oil on rusted screws. Sealed beam should come out part way until wire connector on back is visible; unplug. replace with new. OR; go to Auto Zone and they might do it for you if you buy the replacement there. Ray (garage owner)

Sep 20, 2010 | 1988 Honda Civic 2 Door

1 Answer

Headlights not working.checked circuit and have power to fuses and plug,replaced headlight and still nothing.what should i check next?


if you have power at the head light plug or pig tail then you have a bad ground turn the head lights on and probe the ground wire with the balb still in if the lights come on the run new ground wire or find the broken wire and repair it

Jan 11, 2010 | 1987 Honda Accord

1 Answer

No head lights 87 honda accord lxi


Do your high beams work? The problem could be your turn signal/high beam switch. If the lights come on when you use the high beams replace this switch. It is available at most autoparts stores. Not a diffucult repair probably under two hours.

Jun 05, 2009 | 1987 Honda Accord

1 Answer

My headlights don't retract


if you bought it with the problem it could be that the previous owner has had a "sleepy eye kit" fitted, if so, somewhere you may find a switch that is not a factory fitted switch, not the latching type but a press and release type which if momentarily pressed with the head lights turned on it gradually lowers the headlights to the desired height.
hope this is of help to you.
regards .dave

Mar 08, 2009 | 1987 Nissan 200SX

1 Answer

Headlights on a 1991 Honda Accord


the bulb gets replaced from the back the front headlight covers do not come off .You first have to unplug the wiring connector to the bulb you are replacing which sometimes is a pain then you twist the ring that's around the bulb to unlock it from the housing then pull the bulb straight out .If the bulb your replacing is on the same side as the battery you will need to remove the battery because there wont be enough room for you to access

Feb 25, 2009 | 1991 Honda Accord

1 Answer

Low beams


hello i no you said you checked your fuse box go under your hood drivers side near your strut tower their problay is a second fuse box its black some times fuses is on the cover you have to unlock the side of cover lift off on inside of cover will list what is what sometimes left and right headlamps are seperate fuses goodluck

Jul 23, 2008 | 1989 Honda Accord 4 Door

2 Answers

88 Honda Accord left front turn signal assembly


*The Turn signal on the Side of the car next to the headlight*
1. Open the retractable headlights.
2. Remove the plastic shroud around the headlight: two screws in front and one on each side.
3. Look to the outside of the headlight and you will see a single screw in a small plastic cover on the front inside edge of the signal light assembly. The headlight prevents you from getting at the screw straight-on. I broke it loose with an offset phillips screwdriver, and then backed it out with a regular phillips.
4. Remove the plastic cover, and you will see two screws. Remove them.
5. Now you can pull the turn signal assembly forward and out.
6. To remove the bulb holders from the assembly, twist counterclockwise and pull out.
7. Pull straight outward to remove the bulbs. To assemble, follow the steps in reverse. Note that there are two plastic rods on the back end of the turn signal assembly that you will insert into two holes in the channel of the fender

*The turn signal in the bumper*
1. You will need a phillips head And Flat head screw driver, right below the turn signal there is a panel that you can pop out, (or its allready gone, Looks like a Fog light can go in there.)
2. once u find that, (Pretty easy to find) Look directly up in there., there is styrofoam up there and u will also notice a little hole,
3. Stick the Phillips head screw driver in that hole and turn it counter clockwize, The screw will not fall out,
4.once it feels like the screw is loose put the flat head in between the turn signal lense and bumper, the side where you unscrewed it and SLOWLY pry it out,
4. once out, just twist the plug and replace light bulb
to replace just reverse instructions

Jun 29, 2008 | 1988 Honda Accord 4 Door

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Kevin Daniels

Level 3 Expert

1455 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...