Question about Chevrolet Avalanche
Replace valve cover gskets
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
you probably mean the valve head gasket.
In this case this is serious work and you should contact a local VW dealership or mechanic and have them do this work for you to insure a job well done. If you simply mean your Valve cover, then this is no big deal and can be done by taking out the 4 screws found at the corners of the valve cover and then simply lifting the cover free and replacing it with a new one/tightening the screws back down.
hope this helps :)
Posted on May 17, 2008
Removal of the plenum is pretty straight forward. You will need to replace the plenum gasket after you remove it; the gasket is not reusable. Personally, if I was going to take the trouble to remove the plenum, I would replace the plugs and wires back there, also.
I know, I have a 93 Camry V6, and it is a real pain to do the plugs and wires with the plenum on. There are no secrets or great tips on the plenum removal, just take your time. Remember that there are different size bolts, and where they go. Please get back to me if you need any more info...Hope this helps, and thanks for choosing FixYa to resolve your issue.
The graciousness of a FixYa rating for my assistance would be greatly appreciated.
Posted on Dec 15, 2008
SOURCE: valve cover gasket leaking
When you buy the valve cover set, it will include the spark plug well "O" rings. Simply remove the valve cover and on the underside of the valve cover, you'll see the "O" rings that need replaced and you'll see exactly how the valve cover gasket itself fits.
Posted on Feb 12, 2009
SOURCE: replace valve cover gasket
I have the same problem on a 2003 Town & Country. The cover for the front 3 cylinders is quite straight forward, but in order to do the rear cylinders I believe you are going to have to remove the cowling below the windshield. You will need a gear puller to remover the windshield wipers first, then remove the cowling. Than should give you more room to work. It's still not going to be easy, but it sure beats paying hundreds of $$$$ in labor charges.
Posted on May 04, 2009
The first step is to remove all the parts that are in the way of you being able to remove the valve covers. (Ex.: air intake, loose wires etc.) Then you will need to remove your valve covers (using basic tools) and be very careful to not let anything get on your lifters, which your valve covers protect. Once you have the valve covers off compare the new gaskets to make sure they are the right size. Then remove the old gasket and replace with the new one using a high temp gasket sealant (available at any auto parts store) to attach the gasket to the valve covers. Then tighten down snug and check for leaks after replaced.
Posted on May 06, 2009
Tips for a great answer:
Mar 23, 2017 | 2005 Chevrolet Avalanche
Sep 06, 2014 | Cars & Trucks
Mar 24, 2013 | 2004 Chevrolet TrailBlazer
Aug 28, 2012 | Cars & Trucks
Jan 29, 2011 | 2001 Pontiac Montana
Mar 19, 2010 | 1997 Chevrolet Cavalier
Mar 07, 2010 | 2004 Kia Optima
May 05, 2009 | Chevrolet Malibu Cars & Trucks
Nov 18, 2008 | 1997 Ford Escort
124 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: