Question about 1995 Mercury Grand Marquis

2 Answers

Need skid plate

Where can i get a skid plate for the front of my car?

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 1,669 Answers

Try these web sites:

http://www.autopartswarehouse.com/models/mercury~grand_marquis~makemodel.html

http://www.rockauto.com/dbphp/x,make,MERCURY,year,1995,d,1995_MERCURY.html

Posted on Jan 20, 2013

Testimonial: "Thanks for the response, Leigh. Unfortunately neither site had what I need. I've tried numerous sites and always got the same negative response. I guess I'll just have to see if the local Ford dealer can help. "

  • Leigh Perlmutter
    Leigh Perlmutter Jan 23, 2013

    Sorry I couldn't be more help!

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Have you tried partsgeek.com?

Posted on Aug 22, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to get the half shaft out


Halfshaft -sorry but the diagrams didn't paste into the fixya.com window, just the text. Also, this was for a 3.2L engine.
REMOVAL & INSTALLATION

  1. Before servicing the vehicle, refer to the precautions in the beginning of
    this section.
  2. Remove or disconnect the following:

    • Negative battery cable
    • Front wheel
    • Radiator skid plate
    • Transfer case skid plate
    • Brake calipers and mounting bracket
    • Brake rotor
    • Wheel speed sensor
    • Steering knuckle

  3. Support the axle housing with a jack. Unbolt the axle mounting bracket and
    remove the halfshaft/bracket assembly.
    To install:

  4. Install or connect the following:

    • Axle/bracket assembly. Tighten the bracket flange bolts to 85 ft. lbs. (116
      Nm) and the bracket mounting bolts to 112 ft. lbs. (152 Nm).
    • Steering knuckle
    • Wheel speed sensor
    • Brake rotor
    • Brake caliper and mounting bracket. Tighten the bracket bolts to 115 ft.
      lbs. (155 Nm).
    • Transfer case skid plate. Tighten the bolts to 27 ft. lbs. (37 Nm).
    • Radiator skid plate. Tighten the bolts to 58 ft. lbs. (78 Nm).
    • Front wheel
    • Negative battery cable

  5. Check the wheel alignment and adjust as necessary.





    Fig. 1: Exploded view of the left halfshaft, axle shaft and
    axle disconnect
    7924bg26.gif






    Fig. 2: Exploded view of the right halfshaft and mounting
    bracket
    9308bg03.gif



prev.gif next.gif

Oct 31, 2010 | 2002 Isuzu Rodeo Sport

1 Answer

Location of oil filter


The 2007 Tundra 5.7l engine doesn't have a spin on filter - it uses a replaceable paper cartridge within a permanent housing. Located under the skid plate on the front-left portion of the engine, the oil filter unit has two coolant hoses, a black plastic screw-in housing, and a large, metal, round screw with a 1/2" square fitting in the middle of it. The cartridge-type oil filter is in the housing.

If equipped with a skid plate, access is accomplished by removing the 5 skid plate bolts, allowing the plate to swing down on integrated hangars (with the front plastic bumper skirt still attached). To completely remove the skid plate, three small screws holding it to the front plastic bumper skirt must also be removed.

Toyotafilter kits contain a new filter cartridge, a plastic drain plug, and two O-rings. The drain plug is used to drain residual oil from the filter unit prior to removing the plastic screw-in housing. After removing the large, metal, round screw with a 1/2" square fitting in the middle of it, the plug simply snaps into the bottom of the plastic housing. The smaller of the two new O-rings replaces the existing O-ring on the screw.

Once drained, the plastic screw-in filter housing is removed using a filter wrench (Toyota special service tool). The larger of the two new O-rings replaces the existing O-ring on the screw-in housing. VERY CLOSE ATTENTION must be paid in placing the new O-ring - failure to properly seat the new O-ring could result in a massive oil leak! The filter itself is currently only available from Toyota.

Aug 15, 2010 | 2007 Toyota Tundra

3 Answers

My hyundai Santa fe is leaking transmission fluid somewhere at the front of the engine. I can't see it because of the skid plate. Any ideas of what it could be?


Good Evening. Unfortuantely there is no easy path to a right answer here without removing the skid plate. In front of the engine are transmission cooler lines and other miscellania. The best advice i could give you is take down the skid plate and have a can of brake cleaner handy to clean everything off while you have it turned off then have someone turn it on for you so you can visually see where it is coming from. Hope this helps and if you have any more questions feel free to ask.

Aug 14, 2010 | 2004 Hyundai Santa Fe

1 Answer

On a 2004 Jeep Grand Cherokee 4x4 with a 4.7 H.O. engine do you have to remove the front skid plate to access the oil filter for changing? Thanks in advance.


Not as far as i know. But if u can't get it from top or bottom the skid plate is an easy removal. Hope this helps.

Aug 11, 2010 | 2004 Jeep Grand Cherokee

1 Answer

Replacing the skid plate on 07 Tahoe Z71


Remove bumper or use a swivel adapter to remove

Apr 29, 2009 | 2007 Chevrolet Tahoe

1 Answer

Oil change on a tundra


No special wrench needed for filter.
The oil filter is located in the front of the engine on the right side, down at the bottom.
It's easier to change the filter by taking of the front skid plate underneath. You'll need a 12mm socket to take it off.

If you try to get it from the top, you'll get oil all over the skid plate and have a big mess to clean up. Plus, you may damage the radiator by leaning on it.

Apr 16, 2009 | 2007 Toyota Tundra

2 Answers

Oilfilter


You didn't post the size of motor but once you drop the skid plate, you will see it.

The oil filter is under the engine skid plate. You need to remove the trap door to see.
The skid plate door is located by the drivers side door, directly midway underneath the vehicle. You will need a flat or Phillips-hear srewdriver to open the trap door. Don't worry, the screws are 'loss-proof' and will not fall off the trap door plate. Once this has been removed, the oil drain plug and oil filter are now visible and accessable (how smart is that!) Typical oil change and oil filter replacement time = 15-20 mins. for a familiar shadetree. p.s. The Inline 6 (24 valve - 4.2L) takes 7 quarts of oil. Good luck!

Mar 15, 2009 | 2008 Chevrolet Trailblazer

1 Answer

Nissan 2005 maxima plastic cover under the engine came down


this is called your skid plate, it is there in case you run over a curb or something of the sort, these things are rather flimsy and tend to brake easily, check to see if the holes where the skid plate's should be located are broken. If this is the case a cheap fix that gets the job done would be to purchase some zip ties and secure the skid plate with those. The other two alternatives would be to either purchase a new skid plate, or remove your skid plate and bank on not running over any curbs :) good luck!

Jan 29, 2009 | 2005 Nissan Maxima

1 Answer

Replace the face skid in the front bumper


remove front bumper and it should be clear what holding the face skid in place

Sep 29, 2008 | 2008 Honda Pilot

Not finding what you are looking for?
1995 Mercury Grand Marquis Logo

Related Topics:

80 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercury Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

fordexpert

Level 3 Expert

5470 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Mercury Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...