Question about Cars & Trucks
My microwave door part broked, i open the microwave and find a plastic part with 2 litte pins inside broked thats the reason i cant open my microwave, anyone know where i can buy that part the mycrowave is only 18months old and works perfectly.
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
there is a metal bar inside that clips into the handle they come off all the time there is a plastic clip that hold the 2 together it most likely has fallen off and into the bottom of the door you can put it back together easily if clip cannot be found you can buy them at local parts store for a couple bucks..hope this helps
Posted on Nov 21, 2008
You should replace the handle with an aluminum version. The best one I have found is sold on eBay for 12 dollars.
Look for the one sold by mike8756.
It is easy to install, does not require removing any panels. Th first one I replaced took me about 1/2 hour. I hae done several since for friends and now takes about 15 minutes.
Installation instructions are here:
Posted on Mar 19, 2009
I just bought the part last week for 61.76 from the dealership. It takes about two hours to unscrew the strap from the inside, remove trim from the inside starting at the top, sides and bottom. Remove the license plate from the outside of the hatch. Next remove the 8 bolts (10mm)and 3 white plastic tabs that snap on from the large black plate and move to the side (you don't need to disconnect the wires). From here you can reach around the rear window unit and open the door by moving the latch or pulling the cable. You should remove the 4 nuts that hold on the rear window assembly and move the to reach two nuts which holds the center portion of the trim piece you are trying to remove. There should be a plastic piece covering the cable and latch, it just pops off by pulling it straight out. There are three plastic tabs in the corners and one screw (lock for the hatch) that holds on the license plate assembly to the rear hatch along with two white plastic tabs which are located at the bottom two holes for license plate. These plastic tabs come in from the front. Use pliers to squeeze the together and push. You will need to disconnect the license plate lamp wire connector from the left side. The license plate assembly should drop away. Two screws hold on the latch, remove and replace and reverse proceedure.
Posted on Jul 19, 2009
Tips for a great answer:
Mar 24, 2014 | 2003 Toyota Avalon
Jan 01, 2014 | 2001 Chevrolet Tracker
Dec 06, 2013 | Land Rover Cars & Trucks
Nov 26, 2011 | 1997 Chevrolet Blazer
Jan 11, 2011 | 1991 Acura Integra Hatchback
Dec 14, 2009 | Honda Odyssey Cars & Trucks
Oct 19, 2009 | 2007 Chevrolet Uplander LS Minivan
Jun 20, 2009 | 1992 Ford Explorer
23 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: