Question about 2002 Volkswagen Golf
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You will probably find it is a problem with the switch on the brake pedal.
Get your self a cheap multi meter from an electronics store. Set it to meaure ohms. This is used to check if a connection is complete.
Take the wires off the switch on the brake pedal and test if the connection is open or closed. Push the pedal and check the connection again.
If the switch only had one wire then the negative connection is made to the body of the car. Put one probe of the volt against bare metal of the body somewhere and the other agains the terminal of the switch and test again.
This should tell you if the switch is broken. if the switch is good then you probably have a short circut somewhere between the brake lights and the switch. That is something has pinched or other wise broken the wire and it is touching metal of the car. You will have to follow the wires as best you can and look for damage.
Hope this helps
Posted on Sep 25, 2009
This is a common occurance in vw's.
In order to turn off the airbag light you need to have a scan tool hooked up to your car because the airbag detected a fault of some sort, or it could be a faulty component in the airbag system itself.
Posted on Mar 04, 2009
Tips for a great answer:
Dec 10, 2015 | Cars & Trucks
Nov 08, 2014 | 2005 Volkswagen Polo 1.9
Dec 03, 2013 | 2005 Volkswagen Polo 1.9
Feb 19, 2012 | Volkswagen Polo Cars & Trucks
Sep 11, 2011 | 2002 Volkswagen Golf
Sep 14, 2009 | 2002 Volkswagen Golf
Jul 27, 2009 | 2002 Volkswagen Golf
Aug 12, 2008 | 1983 Volkswagen Rabbit Pickup
146 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: