An expert who has achieved level 3 by getting 1000 points
An expert that got 10 achievements.
An expert that got 5 achievements.
An expert whose answer got voted for 100 times.
Re: replace headlight caseing
Well you need to take off the front bumper to do this there are retainers up top and their are retainer on bottom of bumper or 10mm bolts and also at the fender edge to bumper bolts same 10mm slide the bumper off then you can put the light in
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Apr 1, 2010 - 13 posts - 6 authors
My passenger side low beam headlight recently went off on me. ... I've changed the bulb again, and changed the fuse just in case, but .... My driver side headlight wire got loose so when i hit a bump at night if would flicker. ... When you notice one side not working (Low or High beam) it could be the module.
Jan 22, 2009 Low beams don't work but High's do
Mar 20, 2005 More results from www.nissanclub.com
Jun 29, 2013 - Uploaded by hp11208
Low beam head light bulb replace 2000-2006 Mazda Mpv .... My step dad and I successfully replaced a headlight yesterday! :-) ...I've lost it trying to replace the bulb. if anyone can let me know I would really appriciate it thanks ! ..... 5:00. Cleaning your IAC to fix rough idle on 2000 or 2001 Mazda MPV ...
The problems are probably related in some way. Let's reason this out...If there is an intermittent short in the wiring somewhere it could blow bulbs. If you have poor grounds on the MANY ground wires in the car and in the engine compartment, sudden surges could be taking out fuses and bulbs. If you really want to find the solution(s), you will need a wiring diagram of the complete car. You can get one by going to the auto parts store and requesting a Haynes auto book for a 2002 Oldsmobile Intrigue. In it you may find some hints like I gave you. Try to trace the worst problems first so that you can keep the car on the road (pass inspections)...
First, check the sockets on both headlights, both running lights, as well as the tail lights, brake lights, and backup lights. If all sockets (and wiring) is good, then you may have a short in the switch itself. Also, check all fuses and relays, and replace as necessary.
Please let me know if you need further assistance.
Guru, Premium Expert, Phone Support, Live Chat @ Fixya.com
Pull and replace the fuses for the headlights. Its likely a dirty contact. To be sure use a volt meter and measure the voltage at the headlight. Should be close to the battery voltage. If its low and its not the fuse start tracing back the wire from the headlight until you find the bad connection.
One of two possibilities - either bulb is going bad internally or the connection is corroded. In either case when tapping it is making contact and turning light on. If it's an old bulb, just replace it and be done with problem.
The problem is almost certainly only a bad connection at the back of
the headlight unit. Have the 3 pin plug and terminals replaced...fit a
new bulb, and check the earth connection and all should be well.