Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Ford has an add on keypad also if it is pretty much flush on the door it is factory if it is a fat keypad it is an add on The factory module is under the dash by the fuse panel the number should be on it
Posted on Nov 22, 2008
SOURCE: Keyless entry remote
hello Kirk , follow these instructions carefully :
sitting in car with all the remotes you wish to register with the vehicle readily available ,,close all doors ! insert key into ignition and remove 6 times within 10 seconds ,, (hazzard warning lamps will then flash twice) ** note withdraw key completely from the cylinder each time ,, if procedure is done too fast it will not enter registration mode ,, ok ,, insert ignition key into cylinder and turn to the accessory position ,, Push any button on the key fob once ,, (hazzard warning lamps will then flash twice),, at this time the new ID code is entered ,, at this time open drivers door ,, check operation of all remotes ..
enjoy Mate .
Posted on Jan 04, 2009
SOURCE: 2006 Chevy Equinox
Hiya...the factory-installed keyless remote control are installed in most Equinoxes IF SO equipped with this option that year.
However, it's difficult to get "true factory-installed" keyless feature in your Equinox ....but new 2008-2009 Equinoxes built this year now comes with standard keyless remote and yes, new option is remote STARTER feature (that option is identified by a black wire found inside the rear-right quarter window with thin metal line surrounding that interior window to receive signal from remote starter fob)
At least you can find after-market keyless remote control at your local retail store.
Posted on Jan 31, 2009
SOURCE: IAT location on my Scion XA
Your intake air temperature sensor is part of the MAF (mass airflow sensor) and located right off the air filter housing in the large tube going to the throttle body.Its held on with 2 screws and has a 5 wire electrical plug going to it.
Posted on Apr 24, 2009
The keyless entry is designed to work with the doors closed (closed - not locked). If the door ajar sensor thinks the door is open the keyless entry is disabled. When you manually lock the door it might tighten the door just enough to activate the keyless entry. I would try slamming all the doors closed and then see if the keyless entry works. If it still wont work have the wiring checked on the front door lock.
Posted on May 12, 2009
Tips for a great answer:
Jan 05, 2016 | 2006 Scion xB
Sep 13, 2014 | 2006 Scion xA
Jan 21, 2013 | 2005 Scion xA
Feb 20, 2012 | 2005 Scion xA
Nov 04, 2011 | 2006 Scion xA
Oct 26, 2010 | 2006 Scion xA
Sep 25, 2009 | 2006 Scion xA
29 people viewed this question
Usually answered in minutes!