Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
glad you posted what colors you do have , cause 2 resources didn't match ,actually 3 , i did find a match to your colors was a 97 year model premium radio, so we have a match .....
black/ light green = ground
dark green = left front spkr +
purple = right front spkr +
blue/white = right rear spkr -
brown/blue = left rear spkr -
brown/yellow = left rear spkr +
blue/orange = right rear spkr +
black/yellow = park lamps
brown/red = left front spkr -
orange = dimmer signal
pink = fused battery +
green/red = radio choke relay
red/white = fused ignition
blue/red = right front spkr -
djmac62 is also an excellent answer
Posted on Jan 10, 2009
White is ground, black is power to trailer battery trickle charge, blue is brakes, green is tail/running lights, red is left turn signal and left brake light, brown is right turn signal and right brake light, yellow is aux power/back up lights. This is the general color coding, there are exceptions, white, black, and blue are pretty much always as listed above, sometimes the others vary. If you find you are having trouble, post any further questions here, I'll be glad to help out. Curt
Posted on Apr 24, 2009
It looks like there could be a service bulletin to fix this.
TO: ALL TOYOTA DEALER PRINCIPALS,
SERVICE MANAGERS, PARTS MANAGERS
SUBJECT: SPECIAL SERVICE CAMPAIGN 10H
(2000 TUNDRA AND 1999 - 2000 TACOMA TRAILER TOWING WIRE HARNESS
Toyota will initiate a Special Service Campaign to replace the Toyota Trailer Towing Wire Harness
Converter (converter) on certain 2000 model year Tundra and 1999 - 2000 model year Tacoma
vehicles equipped with a genuine Toyota Trailer Towing Hitch or Bumper Hitch. This accessory
is included in the Towing Hitch Kit installed at ports (PIO) and by dealers (***); it is also sold by
dealers as an over-the-counter or service part.
An electrical short or open circuit can cause a fault in the genuine Toyota Trailer Towing Wire Harness
Converter (converter). This can cause a failure of the converter, and if a trailer is being towed at the time,
non-operation of the trailer lights. In limited cases, the converter housing could become heat-deformed.
In the case of the Tundra, the circuitry utilized in the converter was inadequate to properly manage
vehicle and/or trailer-side voltage spikes. If the converter is exposed to a voltage spike it may cause an
electrical short or open circuit within the converter.
As for the Tacoma, due to deficient waterproofing and improper installation location of the converter,
which is mounted in the lower portion of the taillight cavity of the vehicle, an electrical short circuit will
occur if water enters the converter housing.
The following vital information is provided to inform you and your staff of the campaign notification
schedule and your degree of involvement.
1. Owner Notification Letter Mailing Date
The owner notification will be conducted in two phases:
• The first phase will be launched in late August and involve vehicles equipped with port
installed (PIO) genuine Toyota Towing Hitch Kits.
• The remaining vehicle owners, whose vehicles may be equipped with a dealer installed (***)
genuine Toyota Trailer Towing Wire Harness Converter, will be notified in the second phase
to be launched in early September.
We have attached copies of the owner notification letters for your reference.
If you are contacted by an owner of an involved vehicle, who has not yet received a notification,
please verify eligibility through TDN or TIS, inspect the vehicle to assure it is equipped with the
affected part, and perform repairs as outlined in the attached Technical Instructions.
Posted on Jul 12, 2009
That connector is for the lumbar support in the seat. The wires are as follows:
Black - Ground, ends at left side under the dash.
Red and Black - Power to circuit fromk fusible link
Yellow and Green - Lumbar support, Push out
Red and Yellow - Lumbar support, Release in
Yellow and Blue - Side lumbar support, Spread out
Yellow, Should be Yellow and White- Side lumbar support, Close in
Hope this helps. Good Luck!
Posted on Apr 29, 2011
Tips for a great answer:
May 31, 2015 | Cars & Trucks
Jan 25, 2015 | Cars & Trucks
Apr 22, 2011 | 2001 Daewoo Lanos
Aug 27, 2009 | 2004 Dodge Ram 3500 Truck
Aug 10, 2009 | 1991 Ford Tempo 4 Door
Aug 01, 2009 | 1991 Honda Accord
Apr 05, 2009 | 1998 Honda Accord
Mar 28, 2009 | Scion TC Cars & Trucks
22 people viewed this question
Usually answered in minutes!