Question about 2001 Nissan Maxima

1 Answer

2003 nissan maxima se

Passenger side high beam does not work even after changing the buld! What the f is going wrong. I checked the fuses and all, they are good! CAN ANYONE HELP WITH THIS PROBLEM!!

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

Unplug the bulb and look inside the connector, you may have corrosion in there. Also check the connector to the headlight housing for corrosion as well.

Posted on Apr 06, 2009

  • 1464 Mar 03, 2011

    I have the same problem. No apparent corrosion at all. Took the bulb from the passenger side that didn't work and installed on the drivers side and it works. Checked all fuses. Put a new bulb in passengers side and still no go?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I locate head lamp relay


HELP! headlight not working even after change - Nissan Forums ...

www.nissanclub.com/...nissan-altima.../302674-help-headlight-not-worki...

Apr 1, 2010 - 13 posts - ‎6 authors
My passenger side low beam headlight recently went off on me. ... 2002-2006 Nissan Altima Discussion (2.5 & 3.5) > HELP! headlight not working even after change ...When energized, this relay directs power .... checked the fuses, all are perfect. i guess iwill have to open up the entire headlight to see the ... 2002 Altima Ignition/Starting issue
9 posts
Jan 17, 2012
Lowbeam Headlight problem
2 posts
Dec 31, 2009
IPDM issues?
15 posts
Jun 4, 2009
More results from www.nissanclub.com

Remove a Nissan Relay - YouTube

? 0:13
https://www.youtube.com/watch?v=zyRW79kWdAI
Oct 22, 2012 - Uploaded by FixyourNissan
This is how a Nissan relay is removed. ... Nissan MaximaCooling Fan Motor Replacement with Basic Hand Tools HD - Duration: 8:17.

Nissan/ maxima bright headlamp on one side quit working ...

www.justanswer.com > Nissan
Find

Jan 27, 2016 | 2004 Nissan Maxima

2 Answers

Head light have low but when using high does not work just on one side drivers side


HELP! headlight not working even after change - Nissan Forums ...

www.nissanclub.com/...nissan.../302674-help-headlight-not-working-eve...

Apr 1, 2010 - 13 posts - ‎6 authors
My passenger side low beam headlight recently went off on me. ... I've changed the bulb again, and changed the fuse just in case, but .... My driver side headlight wire got loose so when i hit a bump at night if would flicker. ... When you notice one side not working (Low or High beam) it could be the module. Headlight replacement
15 posts
Jan 22, 2009
Low beams don't work but High's do
8 posts
Mar 20, 2005
More results from www.nissanclub.com

Dec 20, 2015 | 2004 Nissan Sentra

1 Answer

2000 Maxima right passenger side headlamp does not work in low beam only, high beam ok. When I jiggled the harness cable (after replacing the bulb just in case) the lo beam would flicker on/off. Do I...


Dear,

dont buy any harness or module etc.
It is just because the bulb holder as burnt off............please get it changed will cost u very less

thanx

May 07, 2011 | 2003 Nissan Maxima

1 Answer

I have the same problem as Sony 11. Passenger side high beam will not operate. Fuses OK. No visible corrosion. Took bulb from passenger side that didn't work and put it on the drivers side and it works....


The only thing it can be ie either wiring or connector terminals - a broken wire or a connector that has pulled loose in the circuit somewhere. try trace backwards from the headlight for any faults, I know it is difficult because everything goes back into inaccessible harnesses, but there really is no other way out. Check that the relay is plugged in properly and also inspect the fuse box where the wires come out.

Mar 03, 2011 | 2003 Nissan Maxima

1 Answer

My nissan maxima's headlights go fine on dip and full but when you put them on high beam they just cut off completely any ideas on how to fix this???


Have you replaced the lamps? Most car headlamps have separate elements for low beam and high beam. If both elements are broken, there's your answer. I believe also that the high beams are on a separate fuse to the low beams, so check your fuses to make sure it hasn't blown. Hope this helps!
Cheers, John

Nov 23, 2010 | 1990 Nissan Maxima

1 Answer

My high beams dont work neither do my fog lights or pass side tag light. its a 2006 nissan maxima.


CHECK FUSE TO TURN SIGNAL OR COMBINATION SWITCH.IF FUSE GOOD PROBLEM COULD BE IN COMBINATION SWITCH.

Mar 31, 2010 | 2006 Nissan Maxima

Not finding what you are looking for?
2001 Nissan Maxima Logo

270 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

705 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...