Question about Cars & Trucks
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
do you have a hole in the piston or gasket? If in the piston it is most likely from coolant or water. If water, could be a cracked head, or being sucked in through the intake and building up in the 6th cyl. I have a lexus that had a hole in the side of the motor and noon could figure out why. I pulled the head and found water... Put new block in and egr codes came up. Pulled EGR and found it was sucking in water, due to an exhaust leak that was allowing condensation to build and would not blow out once in the egr tube. If you face the same problem (hole in block) I am going to say too much compression. Could be from head gasket not being torqued properly and leaking cooland, cracked head, or wrong spark plugs-and worst case scenario which I have yet to witness, bad spark plug gap. Not likely on your car, i would think.
Posted on Mar 29, 2010
SOURCE: nissan navara timing chain marks
I have a Nissan Nivara With the Z24 motor Fitting a new timing chain sprokets guides and adjuster Where does the camshaft numbers 1 2 and3 go
Posted on May 03, 2011
Tips for a great answer:
Mar 17, 2016 | Nissan Cars & Trucks
Sep 29, 2014 | 1986 Nissan Patrol Wagon
Feb 11, 2012 | 2006 Nissan Navara 2.5
Apr 18, 2011 | 1986 Nissan Pickup 4WD 1986
Jan 13, 2011 | 1986 Nissan Pickup 4WD 1986
Dec 01, 2010 | 1986 Nissan Pickup 4WD 1986
Feb 27, 2010 | 1986 Nissan King Cab
126 people viewed this question
Usually answered in minutes!