Question about 1998 Ford Explorer

Open Question

P2270 and p2271 codes

Runs great but shows p2270 p2271 p0136 and p0153. I replace the o2 sensor past the cat but still the codes come back

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
tepfy
  • 319 Answers

SOURCE: it doesnt idle properly and when i give it gas it lags

http://www.cardiagnostics.be/wds2000_bestanden/Ford%20diagnostic%20trouble%20codes.htm

it says there is a door or tailgate problem, I don't beleive this is your problem. how is it idleing, when you start it when you let off the gass and when you put on the gass please give me all this info, it sounds like a idle control sensor which is a common problems to fix on Fords

Posted on May 01, 2009

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the code p2271 o2 sensor located?


This oxygen sensor is located on the exhaust system behind the catalytic converter.If you have a V8 or V6 it will be on the exhaust running from the bank that has the #1 cylinder,after the cat on that exhaust run,if it's a 4 cyl again it's after the cat.

Jul 25, 2017 | Cars & Trucks

4 Answers

Code p0153..p1153


Rowland, Code p0153 Faulty oxygen sensor.
http://www.obd-codes.com/p0153
Code p1153 Probale faulty oxygen sensor.
PCM detect less than 55 lean to rich or rich to lean switches
P1153 OBD Trouble Code

Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

Mar 21, 2016 | GMC Cars & Trucks

1 Answer

Check engine light is on autozone gave P2270 after checking it? What does this mean?


This P2270 trouble code refers to the post-catalytic converter O2 (oxygen) sensor on bank #1, sensor #2.

Check this site:
P2270 O2 Sensor Signal Stuck Lean B1S2

P2270 O2 Sensor Signal Stuck Lean B1S2

Feb 28, 2015 | Cars & Trucks

1 Answer

Cadillac Escalade 2008 what to the codes P2270


Bank 1 Sensor 2 signal is indicating a lean condition, replace the O2 sensor. Right side (passenger) after the Cat.

Nov 02, 2013 | 2008 Cadillac Escalade

1 Answer

P0136 on a 95 camry


Hi there:
Both generic codes refer at Oxygen Sensors, an HO2S that responds too slowly is most likely defective. In order to solve it just replace the HO2S; check there description and diagnosis:
- DTC P0136 - O2 Sensor Circuit Malfunction (Bank 1 Sensor 2)
- DTC P0153 - O2 Sensor Circuit Malfunction (Bank 1 Sensor 2)

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.


Thank you for using FixYa, have a nice day.

Aug 08, 2012 | Cars & Trucks

1 Answer

2002 Subaru Forester P0136 see P2270 P2271 intermittent idling fluctuation and acceleration hesitation


Is the wiring good going to the O2 sensors? Maybe just look the car over and see if you have any bad grounds. They can do weird things. Could be a bad ICU.

Jan 22, 2012 | 2002 Subaru Forester

1 Answer

I have five codes P2237 P2196 P2271 P0030 P0171 and a P2237 pending code on a 2005 elantra.The car runs poorly, bad gas mileage, sluggish with the check engine light on.Are all O2 sensors bad or maybe the...


P2237 P2196 P2271 P0030 P0171

These are all O2 sensor trouble codes, except P0171 which is a fuel trim code,

You have a bad 02 sensor - up stream - Bank 1 Sensor 1.

Replace it, then road test. The engine computer has a 'default' fuel trim it uses when an O2 sensor fails so it can protect the catalytic converter. If this hasn't been going on too long, good chance simply replacing the O2 sensor will remedy your problem.

Feb 06, 2011 | Hyundai Elantra Cars & Trucks

1 Answer

2006 hundai elantra P2270 code. If this is an O2 sensor, which one?


Possible O2 sensors:

P2270 O2 Sensor Signal Stuck Lean Bank 1 Sensor 2
P2271 O2 Sensor Signal Stuck Rich Bank 1 Sensor 2
P2272 O2 Sensor Signal Stuck Lean Bank 2 Sensor 2
P2273 O2 Sensor Signal Stuck Rich Bank 2 Sensor 2
P2274 O2 Sensor Signal Stuck Lean Bank 1 Sensor 3
P2275 O2 Sensor Signal Stuck Rich Bank 1 Sensor 3
P2276 O2 Sensor Signal Stuck Lean Bank 2 Sensor 3
P2277 O2 Sensor Signal Stuck Rich Bank 2 Sensor 3
P2278 O2 Sensor Signals Swapped Bank 1 Sensor 3 / Bank 2 Sensor 3
---
This is Bank 1 (closer to the dash panel) Sensor 2 (located after the catalytic converter).

---
Note: A malfunctioning front oxygen sensor may cause fuel trim codes to set.
  1. Several Diagnostic Trouble Codes use specific terminology to refer to sensor location. The illustration and key below explain the following terms:
  2. Engine BANK Bank 1 is closer to the dash panel, (also referred to as RH or right hand). Bank 2 is closer to the radiator, (also referred to as LH or left hand).
  3. UP Refers to Sensor 1 or "front sensor". It is located closer to the exhaust manifold and before the catalytic converter.
  4. DOWN Refers to Sensor 2 or "rear sensor." It is located after the catalytic converter.
  5. The following examples show how to interpret oxygen sensor terminology:
  6. B1/S1 = Bank 1/Sensor 1 = Dash panel side, BEFORE the catalyst or "upstream"
  7. B2/S2 = Bank 2/Sensor 2 = Radiator side, AFTER the catalyst or "downstream"

Aug 06, 2010 | Hyundai Elantra Cars & Trucks

3 Answers

I failed the emisson's test. I have a 97 Nissan


P0136 indicates a bad O2 sensor. This reports poor emission performance back to the car's PCM (computer)
P0325 indicates a bad "Knock" sensor which would adversely effect drivability as far as performance is concerned. Only way to fix these 2 problems is replacement of the 2 components.

Nov 03, 2009 | 1997 Nissan Maxima

1 Answer

It doesnt idle properly and when i give it gas it lags


http://www.cardiagnostics.be/wds2000_bestanden/Ford%20diagnostic%20trouble%20codes.htm

it says there is a door or tailgate problem, I don't beleive this is your problem. how is it idleing, when you start it when you let off the gass and when you put on the gass please give me all this info, it sounds like a idle control sensor which is a common problems to fix on Fords

May 01, 2009 | 2002 Ford SVT Focus

Not finding what you are looking for?
1998 Ford Explorer Logo

Related Topics:

134 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...