Question about 1999 Honda Accord
The dash and tail lights will not work on my honda, I checked the fuse boxes, the box located under the hood had a popped fuse which I changed, when I changed it the dash lights came back on for a few hours then the fused popped again, when it happened the second time we were flagged off the road and I was told that my tail lights were out too. I put a new fuse in and as soon as I turned on the lights it popped, need less to say, I went through like twenty 15's fuses. I dont know what else to try. I looked all over my car and tore out my radio and cig. lighter, to see if any wires were touching or grounded, I did the same thing in the trunk. My brake lights work, my blinkers work. Help me.
Did you see the Small Black Squares inside the Fuse Relay Box under the Hood? These are Relays. There should be a Relay that says "Illumination" OR "Lights" around this area. Change this Relay and it should be ok. They just Cost a Couple of Bucks. Please Rate my Response, I need all the Help that I can get ! Thanks!
Posted on Jan 26, 2009
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: The dash and tail lights
it is almost impossible to say exactly were you short is i would highly recommend taking this to the dealer they have the correct schematics and eletrical training to make this a fairly quick repair
Posted on Feb 05, 2009
Tips for a great answer:
Dec 21, 2012 | 1991 Honda Accord
Jan 15, 2011 | 2007 Honda Accord Sedan
Jan 05, 2011 | 2002 Honda Accord
Oct 17, 2010 | Honda Accord Cars & Trucks
Aug 10, 2010 | 1994 Honda Accord
Jul 24, 2010 | 1994 Honda Accord
Nov 25, 2009 | 1991 Honda Accord
Oct 24, 2009 | 1990 Honda Accord
Jan 25, 2009 | 1999 Honda Accord
Jan 24, 2017 | 1999 Honda Accord
432 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: