Question about 2007 Honda Accord Sedan
Hitting the key fob twice locks the doors, but no horn beep or lights flash
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 2004 Civic Drivers door lock
The driver's side door lock button is designed not to lock from the inside unless the handle is pulled, or the power switch is used. This serves as a reminder to not lock your keys inside.
If you are inside, and push down on the button (not the switch) hard enough to lock it, you've probably damaged it.
Posted on Sep 17, 2008
Probably the door actuator - a part inside the door that activates the lock, particularly if neither the interior lock switch or the remote do not lock the door. Once the doors lock the horn will beep again - the lack of beep indicates the vehicle is not secure.
Posted on Mar 15, 2009
SOURCE: Honda CRV 2002 Power Door lock
try testing or replaceing the drivers door lock actuator, reprogram ur key fobs and try unlocking and locking ur doors. as far as the lights and reminder,....it sounds like a seperate problem. but try the door actuator first (drivers side always act up and cause every other actuator to act up... like a bad kid that gets the rukkus started and ruins things for everyone..
Posted on Apr 05, 2009
you may need to replace the door locking actuator, they do tend to go bad over times. does the driver side door lock automatic when using the lock button on the driver side. if you can lock and unlock the driver side door with a switch, my guess would not be the locking actuator, it might be in the remote locking module.
Posted on Sep 30, 2009
Testimonial: "Thanks for the help. everything relates back to the actuator.."
Key added or replaced. System malfunction.
Obtain all keys. A maximum of 3 keys can be programmed. Close all doors and boot/tailgate. Switch ignition ON. Repeat procedure below 3 times: Within 4 seconds: Press key lock or unlock button. Within 4 seconds: Switch ignition OFF. Within 4 seconds: Switch ignition ON. Within 4 seconds: Press key lock or unlock button. System should now lock or unlock vehicle. Within 4 seconds: Press key lock or unlock button. Within 10 seconds: Press lock or unlock button of first key. System should now lock or unlock vehicle. Press lock or unlock button of second key. System should now lock or unlock vehicle. Press lock or unlock button of third key. System should now lock or unlock vehicle. Switch ignition OFF. Remove key. Check operation of all programmed keys.
NOTE: If less than 3 keys are to be programmed, remove ignition key after programming last key.
Posted on Jan 25, 2010
Tips for a great answer:
Jan 04, 2016 | Hyundai Cars & Trucks
Jan 29, 2015 | 2006 Hyundai Tiburon
Dec 31, 2014 | 1999 Oldsmobile Alero
Sep 08, 2012 | 2002 Ford Explorer
May 25, 2010 | 2003 Jaguar X-Type
May 05, 2010 | 2003 Jaguar X-Type
Mar 10, 2009 | 2000 Ford Focus
Nov 16, 2008 | 2002 Nissan Altima
Nov 13, 2008 | 2005 Chevrolet Blazer
274 people viewed this question
Usually answered in minutes!