Question about 2003 Buick Park Avenue

1 Answer

How head litht assembly come out

2003 BUICK PARK AVE

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,596 Answers

  1. Open the hood.
    1. Remove the thumb screws (4) that retain the headlamp (3) to the headlamp bracket (1).
    2. Pull the headlamp (3) forward in order to disengage the rear retaining pin (2).
    3. Remove the headlamp (1) from the vehicle.
    4. Disconnect the electrical connectors. NOTE: Avoid touching the bulb or letting the bulb come in contact with anything damp. Oil from your skin or moisture on the bulb can cause the bulb to explode when the bulb is turned on. If either comes in contact with the bulb, clean the bulb with alcohol or a suitable degreaser and wipe the bulb dry.
    5. Turn the headlamp bulbs (2, 3, 4) counterclockwise in order to remove the bulbs
      1. Turn the headlamp bulbs (2, 3, 4) clockwise in order to install the bulbs.
      2. Connect the electrical connectors.
      3. Install the headlamp (1) to the vehicle.
  1. Press the headlamp (3) rearward in order to engage the rear retaining pin (2).
  2. Install the thumb screws (4) in order to retain the headlamp (3) to the headlamp bracket (1).
  3. Aim headlamp. Refer to Headlamp Aiming.
  4. Close the hood.
  5. IF YOU NEED PICTURES I MUST EMAIL THEM TO YOU THEY ARE TOO LARGE OF WRONG FORMAT TO SEND VIA FixYA's WAY Let me Know Your Email Address if you need Pictures

Posted on Jan 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the main fuse box for 2003 Buick park ave


The fuse box is located under the clove box you may need to remover the clove box door to have a good view

Mar 23, 2015 | 2003 Buick Park Avenue

1 Answer

Why does my 2003 Buick Park Ave have an excessively soft ride?


The springs are bad. Shocks will not correct worn out springs.

Aug 31, 2014 | 2003 Buick Park Avenue

1 Answer

Memory mirrors are not working properly on my 2003 buick park ave


Assuming it's and Ultra, the door modules control the mirror position motors in response to position sensors within the mirror. Something has gone wacky in the door module(s) or the mirror assemblies and could be failure of the module(s) or failure of the sensors or motors or both in the mirror assemblies

Oct 15, 2012 | 2003 Buick Park Avenue

1 Answer

Locate parking brake light switch on 2003 buick park ave


The parking brake light switch is located on the parking brake pedal assembly.

Dec 22, 2011 | 2003 Buick Park Avenue

2 Answers

1993 buick park ave wining noise from front end


Grinding noise in the front end could be your bearings or you cv joint

Jan 29, 2010 | 1993 Buick Park Avenue

2 Answers

Will a 2003 buick park avenue grille fit on a 1999 buick park avenue


THERE IS ALMOST FOUR YEAR DIFFERENCE.CHECK WITH AUTO PART BODY REPAIR SHOP.THEY CAN TELL YOU WHAT YEAR GRILLE WILL FIT CAR.

Oct 24, 2009 | 2004 Buick Park Avenue

1 Answer

2003 park Ave running warm. possible bad rad fan relays?


the simplest way to check a relay is to swap it with a relay from somthing that you know works (eg. starter, or horn) if that item still works after the swap then the relay is good.

May 21, 2009 | 2003 Buick Park Avenue

1 Answer

Power door lock switch replacement





Remove or Disconnect

Door handle trim plate.
  1. .Install or Connect

  2. Electrical connector and door lock cable.
  3. Trim panel by engaging hooks on backside of panel.
  4. Push pin fastener in defroster duct.
  5. Screw from behind lamp assembly.
  6. Courtesy lamp assembly.
  7. Two screws in arm rest.
  8. Arm rest cover plate.
  9. Door handle trim plate.
There May Be A Need to Drill Out RIVETS that Hold Motor in place,. Just Replace with>>MACHINED SCREWS & BOLT'S




Remove or Disconnect

  1. Trim panel. See: Doors, Hood and Trunk\Doors
  2. Four tabs retaining switch.
  3. Electrical connector.
Install or Connect

  1. Electrical connector.
  2. Snap switch into trim panel.
  3. Trim panel.

Mar 14, 2009 | 2000 Buick Park Avenue

Not finding what you are looking for?
2003 Buick Park Avenue Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...