Question about Cars & Trucks
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
It's easy and you won't need a prybar.
Posted on Dec 14, 2008
That is Exactly Correct. Draw the Diagram of the Belt Before you remove it so that you can get it Back on the Correct way. Please Rate My Response! Thanks!
Posted on Feb 01, 2009
On my 2005 Tacoma with the 4.0L V6, I found it easier to change the belt from under the truck. Just remove the skid pan. Plenty of room to install the belt. The tensioner pulley is the one at about 2-o'clock from the crankshaft with the belt nearly all the way around it.
Posted on May 19, 2009
Drive Belt: Service and Repair
1. REMOVE V-BANK COVER SUB-ASSEMBLY
2. REMOVE NO. 1 ENGINE UNDER COVER
3. REMOVE FAN AND GENERATOR V BELT
(a) While turning the belt tensioner counterclockwise, align the service hole for the belt tensioner and the belt tensioner fixing position, and
then insert a bar of [diameter]5 mm (0.197 in.) into the service hole to fix the belt tensioner in place.
HINT: The pulley bolt for the belt tensioner has a left-hand thread.
(b) Remove the V belt.
1. INSTALL FAN AND GENERATOR V BELT
(a) Set the V belt onto every part.
(b) While turning the belt tensioner counterclockwise, remove the pin.
NOTICE: Make sure that the V belt is properly set to each pulley.
(c) After installing the belt, check that it fits properly in the ribbed grooves.
HINT: Make sure to check by hand that the belt has not slipped out of the grooves on the bottom of the pulley.
2. INSTALL NO. 1 ENGINE UNDER COVER
3. INSTALL V-BANK COVER SUB-ASSEMBLY
Posted on Sep 30, 2009
There is only one serpentine belt in your car. The belt's usually last much longer then 2 years, best thing to do is go to a parts store like Auto Zone or Parts Source and they can inspect the belt for you and show you how to inspect the belt. It's not the out side that you inspect, but the inside where the ribs are. Inspect the ribs for cracks or missing ribs, you can also maintain the belt by purchasing belt re-conditioner. The re-conditioner will keep the belt from getting to hard and cracking and give you longer life, Auto Zone can also give you the step by step instructions for you to replace your own belt if you need to. Good luck and hope this helps.
Posted on Nov 01, 2009
Tips for a great answer:
Dec 17, 2016 | Nissan Cars & Trucks
Jan 04, 2013 | 2007 Nissan Sentra 2.0 SL Sedan
May 06, 2012 | 2007 Nissan Murano SE
Mar 24, 2010 | 2005 Nissan Murano
Oct 23, 2009 | 2004 Nissan Murano
May 02, 2009 | 2005 Nissan Murano
Apr 27, 2009 | 2007 Nissan Murano SE
449 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: