Question about Cars & Trucks

Open Question

Pax Auli how to assemble sliding doors - Cars & Trucks

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where are the relays for the rear windows located?

There is a relay bank under the hood. According to TexasHonda
In the 03-06 models, a single relay provides pax, RR, LR window motor power. Relay is located in the pax Multiplex Control Unit in the pax side foot well. If you have power to the pax side window, relay is probably working.

Apr 25, 2015 | 2007 Acura MDX

1 Answer

PAX side front window inop for the third time in 5 replaced the motor twice...has to be another problem

Doubt the motors failed at all

I would believe that a couple window regulators failed

There a two things you "never" do with vehicles

Allow a shop inside your doors, to work on window issues
& allow them to replace or as they do (butcher) your brake tubing

Work on it yourself
That way it is once & done (properly)

Aug 31, 2014 | 2003 Toyota Camry

1 Answer

My husband took my Odyssey through the car wash in -4 degree temps. A few hours later after opening the sliding doors we couldn't get them to shut automatically. Today one door will open and close...

On the 05 Odyssey there's a problem with the rear latch assembly(about $140each) located in the rear of each sliding door. The problem is that the latch assembly was not seal proplery and water can get into the latch cause the sliding door to act funny. Maybe replace the latch assembly will help you.

Jan 19, 2011 | 2005 Honda Odyssey

1 Answer

Keyless entry/ inop

locate the door jam wiring boot near the hinges for he left front door. if you pull the boot out of the door, trying not to damage it. you will likely find one or more broken wires inside. they will may not be obvious right away but if you tug on then one at a time you should find it. it will likely be the heaver gauge black one. if you find the wire solder it together with an other wire for an extension because soldering the brake together will cause tension and another brake.

Mar 28, 2009 | 2002 Jeep Grand Cherokee

1 Answer

04 toyota sienna xle driver side sliding door not opening

You need a motor assembly for the power door. It comes with the gears and cables all as one assembly. It requires taking apart the sliding door from the inside. Removing the door panel, door glass, window regulator and motor assembly to gain access to the unit. This is not a job for a novice, and can be a costly repair. Check around for the best price from a place that has experience in Toyota sliding doors.
You cannot just replace a broken cable.

Feb 26, 2009 | 2004 Toyota Sienna

2 Answers

Sliding power doors will not open

Just had the same problem with my '05 van. I put the Master Switch in the off position. I pulled fuse #7 on the driver side sub panel, located just above the engine hood release. I then disconnected the neg. terminal on the battery. I manually opened the pass. side slider and closed it.

I reconnected the battery and replaced fuse #7. I put the master door switch in the on position. I activated the auto door switch, and it worked.

Jan 15, 2009 | 2007 Honda Odyssey

1 Answer

05 Impala Driver's heater only cold, Pax side heater control fine

replace the temp control door actuator its broken in mine too thats what i replaced and works fine now

Dec 02, 2008 | 2005 Chevrolet Impala

2 Answers

Removing the inside door lever, front driver's side

some of them have plastic hooks on them also try sliding it up down left and right it should pop loose and you will be able to pull it out

Nov 13, 2008 | 1992 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides