Question about Cars & Trucks

Open Question

Shifter fork wont engage/ all hydrollics replaced/mc cmc sc aswell

Shift fork wont move/all hydrolics replaced With it on a lift i can switch gears in all gears without cluch or relese fork but once it is on the ground it wont shift.peddel has great preshure and mc sc and all lines have been replaced and vacume blead with a vaczilla. ondemand gives me nothing but put a new trans in. on the road it is hard to force it into gear and dies right after and if you have somone depress the clutch while u watch the shift fork wont engage(or disengage)yet the pressure off of the sc is eather way to much pressure or perfict but still will not engage. im of the suspission that it has to be a bent shifter fork(the main fork coming off the slave into trans) if started in 2nd gear i can get it going and once im going i can shift 3-5 . nick tyler Jan 19, 2013 reverse is the only one that will grind, like its stuck in forword gears AdChoices Ask a Dodge Mechanic Now Dodge.Pearl.com 12 Dodge Mechanics are Online! Get a 1-on-1 Answer in Minutes. Automatic Transmission www.AutoMotix.net/Transmissions/ Low Miles on Auto Transmissions Over 3 Million Parts To Choose From Add Comment .Print Email .. Open Question . nick tyler Jan 19, 2013 enders replaced 4 months ago and worked fine untell now, peddle had to be ajusted but now there is no more room for further ajustment . CancelInsert VideoInsert Image . 3 Suggested Solutions What are suggested solutions? Richard Scordino6974 SolutionsJuly 12, 2009 . . Check all your hydraulic connections for seepage . If you find nothing leaking, check where the rod goes into the master cylinder under the dashboard...If still nothing, I'd change the master cyl, as it is likely internally bypassing and permitting the clutch to release. PS it takesa a special "touch" to shift gears without using the clutch, if you cannot do that don't drive it Till you get it fixed...you will damage synchros and will need to have trans removed and rebuilt. $$$you don't want to spend!!! AdChoices Transmission Repair TwinCitiesAutomotiveRepair.com The Experts in Quality, Timely Auto Repair Service. Call for Appt. Buy Fork lift truck www.forkliftamerica.com Forklift America is your source for the best deals on used forklifts. Source: HELLO EXPERTS I have a 1995 jeep wrangler with . Was this solution helpful?YesNo mary allman126 SolutionsMay 08, 2009 . . check automatic adjuster on clutch pedal under dash . Source: 2002 Sunfire . Was this solution helpful?YesNo . kevinbkr32 SolutionsDecember 10, 2008 . . how does the clutch pedal feel?..clutch out of adjustment,needs clutch job...kev-mn.

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 32 Answers

SOURCE: grinding and very hard to shift, and now the shifter is stuck

how does the clutch pedal feel?..clutch out of adjustment,needs clutch job...kev-mn.

Posted on Dec 10, 2008

  • 126 Answers

SOURCE: 2002 Sunfire

check automatic adjuster on clutch pedal under dash .

Posted on May 08, 2009

  • 2 Answers

SOURCE: automatic transmission wont catch into any gear

You sould have been moore frequent on your transmission fluid changes, and you shouldn't have taken it to Jiffy Lube either. Your best bet is to drain and fill the trans fluid run it shift gears. Drain and fill again. Do this 3 times. Yeah the transmission fluid is expensive. on the last drain and fill you want to get a bottle of LUBE GUARD from NAPA or who ever sells it. put the whole 10oz bottle in. Shift Rev, 1, 2, 3, D. Neutral Rev D. If that don't work then you have bad seals.

Posted on May 27, 2009

  • 6982 Answers

SOURCE: HELLO EXPERTS I have a 1995 jeep wrangler with

Check all your hydraulic connections for seepage . If you find nothing leaking, check where the rod goes into the master cylinder under the dashboard...If still nothing, I'd change the master cyl, as it is likely internally bypassing and permitting the clutch to release. PS it takesa a special "touch" to shift gears without using the clutch, if you cannot do that don't drive it Till you get it fixed...you will damage synchros and will need to have trans removed and rebuilt. $$$you don't want to spend!!!

Posted on Jul 12, 2009

  • 3 Answers

SOURCE: 1996 Geo Metro Clutch won't disengage

have a 1996 Geo Metro 5 speed. Stopped at stop sign and could not get it to shift out of gear, Have to start it in gear

Posted on Aug 09, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Clutch not engaging after being changed


Probably just need to bleed the hydrolic clutch.. You should be able to see the assemble for the hydrolic fork and what looks like a bleeder screw that you would find on your brakes... Bleed it the same way you would brakes..

May 06, 2014 | 1991 Honda Accord

1 Answer

Clutch overdriven nissan K 11 auto


most standard trans have a hydrolic clutch it is located below the power brake booster and it looks like a small cylinder and remove the cap and chk if it has plenty of brake fluid

Mar 16, 2013 | Cars & Trucks

1 Answer

Car moves with shifter in neutral position,feels like in 3rd or 4th gear.with shifter in 1st or 2nd gear car will not move. engine dies when clutch is engaged.


car is in two gears disengauge linkage and put back in Mistral if is a too loader you may have to pull the shift assembly and manually shift thhe gears your shift forks may be bent

Mar 11, 2013 | 1991 Honda Accord

1 Answer

Shift fork wont move/all hydrolics replaced


Just a suggestion here but my son was experiencing the same problem with his Toyota Celica. We replaced the clutch and throwout bearing and MC, had me stumped for days the I pulled back the rubber boot on the MC where the it comes through the firewall under the dash and saw that there was fluid leaking into the boot so basically the MC was bad an it was bypassing the metering valve causing the fluid not to push the slave cylinder all the way down for engagement. On another car ...a 97 Saturn SL it wouldn't shift into gear, also all new clutch components. Wound up being a bad top right side motor mount was bad. engine was sagging just enough to cause the clutch not to shift properly. I hope this helps.

Jan 19, 2013 | Ford ZX2 Cars & Trucks

1 Answer

2000 ford zx2 shift for issues


Can you verify that when you push the clutch pedal to the floor the slave cylinder is moving the pin that goes between the slave cylinder and the clutch fork. It sounds like the clutch is not releasing properly.

Apr 07, 2017 | Ford ZX2 Cars & Trucks

3 Answers

2007 chevy impala won't shift into gear, shifter moves, but doesn't go into gear


It is either the shifter cable or maybe the shifter linkage came undone..

Rate well ;o)

Jul 30, 2009 | 2007 Chevrolet Impala LS Sedan New Cars

1 Answer

Once in Drive, Jeep does not easily shift back to Park


Try to check the trans mission gears of your 1995 jeep grand cherokee.The shift fork and the clutch sleeve of the trans mission is locking to the other gears .And then also check the starter motor and its solenoid.if the starter motor solenoid is destroyed or worn out replace .

Jul 28, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Truck starts but won't engage in any gears


if you can move it into gear when its not running, id say clutch,
but if it wont go in at all, then Im thinking shift forks or linkage

May 25, 2009 | 1998 Dodge Dakota

1 Answer

1991 jeep wrangler sahara shifting promblems


Your clutch is not disengaging. If it a hydrolic clutch chk. the fluid in resavor, Or slave cyl. for the clutch is bad, Or it has got air in it and needs to be bleed. This is a clutch problem, nothing wrong with trans. If its a manual clutch linkage its an ajustment thing. My best guess if its hydrolic slave cyl. went bad, or resavor is out of fluid.

Feb 10, 2009 | 1991 Jeep Wrangler

1 Answer

1992 A4LD trans problems.


Sounds like the shift kit is warn out in the transmission. The overdrive line may not be able to provide enough hydrolic pressure to engage the gears to move the truck. When you switch to regualr drive, that line is able to build the hydrolic pressure to engage the gears. At a certian speed (for the transmission, certian hydrolic pressure) there is enough pressure to engage the gears in overdrive, but go below that, and you have to start in drive again. If this is the case, there is no easy fix for that and I recomend taking it to a transmission shop to have your shift kit examined. Opening up an automatic transmission requires specalized tools, clean shop enviroment, and knowlage more then the average back yard machanic has.

Sep 13, 2008 | 1992 Ford Ranger

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...