Question about 2007 Kia Spectra LX Sedan
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Hello, my name is Mario.
1. Disconnect battery negative cable.
2. Drain engine coolant
3. Remove bolt and nut for thermostat housing
4. Remove the old thermostat
5. Put a new thermostat and gasket (Install thermostat into cylinder head with jiggle pin positioned up.)
6. Place thermostat housing
7. Fill radiator with engine coolant
8. Connect battery negative cable
9. Start engine and check for leaks.
Posted on Jan 10, 2009
The exhaust manifold is right there as soon as you open hood , first disconnect neg batt cab, then jack up car remove bolts that hold pipe to manifold together , unplug any o2 that is in the way and that could get damaged. now from the top take shield off then take manifold bolts out. you might want to spray them with pb blaster and let set a few hours sense exhaust bolts love to break. Remember to use new gaskets installing new one.
Posted on Jun 09, 2009
Helps to remove the battery, but small ahbds can do it.
Directly behind the lens is a big round cap ... twist it off. The bulb is held in place with a spring that locks in to a notch in the holder. When handling the new bulb, don't touch the glass. The oil from your skin will cause it to shatter when turned on.
Posted on Oct 23, 2009
Tips for a great answer:
Nov 08, 2016 | 2008 Kia Spectra
Jul 10, 2016 | Kia Cars & Trucks
May 31, 2016 | 2008 Kia Spectra
May 08, 2015 | 2009 Kia Spectra
Feb 27, 2015 | 2008 Ford Escape
Jan 25, 2010 | 2009 Kia Spectra
Dec 05, 2009 | 2004 Kia Spectra
Nov 06, 2009 | 2006 Kia Spectra
72 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: