Question about 1999 Chevrolet Blazer

2 Answers

Clickin sound, bad turns, slow acceleration, and abs

I have a 1999 chevy blazer and it is making this clicking sound as if my turn signal is on. When I make turns it feel like my wheels are going to break off. When I first start my car up and begin to drive it the acceleration pick up is very slow it seems like it is stuck in one speed a lot of times. My abs is terrible when I'm driving on the regular basis my abs nudges and makes it hard for me to stop at all a lot of times. I don't know what is wrong with my car. Please Help!

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 10 Answers

Hello there,
Well good news! There is a fix for everything. First we will start with the clicking in the column. This is common and is one of two things.
1-the airbag clock spring is defective. Not an easy job but totaly doable with the right guidence and an fairly inexpensive tool. You will need to remove the air bag in the column but you will save if you do it yourself.
2-The turn signal cancelation pawl and or cam screws backed out. This in turn will rub on the lower side of the clock spring and the clicking would be the head of the screws rubbing on the rigges on the bottom of the clock spring. Remove the airbag and steering wheel. Remove the retainig clip on the clock spring and remove the clock spring. Inspect the screws holding down the turn signal cancelation cam.
Ok and for the ABS could be multipule problems. Your truck is equiped with OBD 2. Is there an check engine light, ABS light, or a brake light on in the insturment cluster? You may have a series of componding problems. The brakes could be dragging created by a defective caliper or wheel cyl. Or it could be a simple fuse related problem in the ABS circuit. The fuse is typicly located under the hood in the engine compartment and labled ABS in the fuse panel. If I can be of anymore assistance let me know.

Posted on Jan 26, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You need brake work PRONTO. If you are handy, you can do it your self. If not, get it to someone you trust, cause brake problems can be EXPENSIVE if you take it to your run of the mill mechanic.

Posted on Jan 26, 2009

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

What causes my 96 chevy blazer fog lights to flash while my headlights are on and also can hear a flickering noise in the relay box in the glove compartment. also what causes my turn signals to flash...

you have a bad ground issue with your turn signals or your relay is on its way out. Easy 8 dollar fix and it may even square away the problem with the fog lights. Let me know how it turns out.

Apr 17, 2011 | 1986 Chevrolet S-10 Blazer

1 Answer

I have a 2000 Chevy Blazer. My turn signals click

Does it do it on both sides?If it is just on one side,a bulb could be the problem.When it does this,check the bulbs,by turning the signal on,and look at the front ,and the back,to see if one bulb is not burning.Replace it .One other problem ,check to see if the turn signal fuse is not blown,but melted in the fuse block.The battery voltage needs to be checked also.Check the charging should be at about13.58 to 14.25.If the charging system is not at least 13.50 at idle,chatge battery at slow charge at 2 amps for 24 hours.If the voltage does not come up above 13.501 at idle,have the alternator replaced.The flashers,and the turn signals require a lot of amps.

Aug 29, 2009 | 1995 Chevrolet Caprice Classic

1 Answer

I have a vhevy 1999 chevy blazer and currently my abs doesn't allow me to stop properly at times.Another problem i have been having was hearing a clicking sound like my blinker was on when it wasn't. Also...

Look under the front and check the stabilizer bar. It goes from one side to the other.
I think it may be broken. It`s about one inch thick and is bent into a kund of `U` shape.
let me know what you find
good luck

Jan 26, 2009 | 1999 Chevrolet Blazer

2 Answers


We had the same problem. Hubby replaced the multiswitch and that fixed it

Dec 16, 2008 | 1998 Chevrolet Blazer

1 Answer

98 chevy s10 blazer turn signal

Unplug the turn signal relay from the fuse box and start you engine. Does it still make that noise?
If yes... Put the relay back in, that is not the problem.
If No...Then the relay could be bad, replace it!


Nov 25, 2008 | Chevrolet C1500 Cars & Trucks

1 Answer

When I flip on the turn signals I hear a clicking sound after I turn is completed.

where do you hear the clicking is it like the turning clicking or is it more like a click around the axle. You may have a bad cv axle or a relay dependind on where you hear the clickin

Aug 05, 2008 | Nissan Altima Cars & Trucks

Not finding what you are looking for?
1999 Chevrolet Blazer Logo

413 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides