Question about 2004 Nissan Sentra 1.8
Posted by Anonymous on
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: brake light switch
IT WAS LOCATE IN UPPER OF THE BRAKE PEDAL
BEFORE YOU CHANGE IT CHECK FOR :-
STOP LAMP SWITCH AND ASCD CANCEL SWITCH CLEARANCE
1. Twist and pull to remove switch.
2. Pull up on brake pedal pad and hold.
3. Insert switch into retainer until switch plunger is completely depressed.
4. Turn the switch until it locks into place in the brake pedal bracket.
When turning the switch to lock into place, the switch backs off the stopper to the correct clearance automatically.
5. Release the brake pedal pad.
ASK ME FOR MORE ??
WITH MY BEST WISHES
Posted on Jul 23, 2008
Yes it is as easy as it looks. If you had the tire off and figured out that it looks easy, you shouldn't have much problem.
Posted on Mar 21, 2009
You can cut off the end and replace it. The right ways is to replace cable. the first salution will get you by but will corroud after a while.
Posted on Jul 21, 2009
Negative battery cable Air inlet tube Harness bracket Wiring at the starter Starter
Install or connect the following:
Starter and torque the bolts to 60 inch lbs. (7 Nm) Starter electrical connectors Harness bracket Air inlet tube Negative battery cable
Thanks for using FixYa - a Very Helpful rating is appreciated for answering your FREE question.
Posted on Jul 31, 2009
Tips for a great answer:
Feb 14, 2015 | 2006 Nissan Sentra
Nov 16, 2012 | 1990 Nissan Pulsar
Dec 09, 2009 | 2004 Nissan Sentra
Sep 29, 2009 | 2004 Nissan Sentra
Sep 25, 2009 | 2004 Nissan Sentra
Jun 17, 2009 | 2004 Nissan Sentra
Mar 21, 2009 | 2002 Nissan Sentra
40 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: