Question about 2002 Ford Expedition
The bulbs are fine & so are fuses. when either turn signal is activated, it makes a loud buzzing noise in steering column & it doesn't even flash on the interior panel. sometimes, pushing/pulling lever almost to high beam position will get the turn signal to come on. any suggestions would be greatly appreciated.
Ok well your the lucky owner of an Expediton. I have a few of these trucks in my fleet. The common problem in almost ALL Ford vehicles is the multifunction switch located to the right of your column which is the main switch for you wipers, turn signals, and high beams. Under the plastic column cover is three phillips screws. Remove them and unscrew the tilt lever on the right of the column by spining it with a tight grip counter clockwise. Gently pull the lower cover off and you will see two screws and a large gray plug or it may be black. The internal plastic switch pawl breaks and requires the complete ASSY needs replacing. Remove the plug by pulling out on the plugs tang and pull down on the plug being sure not to pull on the wires for this could create a contact issue later. Remove the screws holding the multi function/ turn signal switch. Replace the switch in reverse of removal. Test the operation before you assemble the column cover.
Posted on Jan 26, 2009
Tips for a great answer:
Feb 14, 2015 | 1999 Ford Expedition
Feb 09, 2014 | 2000 Ford Expedition
Oct 22, 2012 | 2002 Ford Expedition
Jun 05, 2011 | 2003 Ford Expedition
Apr 05, 2011 | Toyota 4Runner Cars & Trucks
May 17, 2010 | 2000 Ford Expedition
Jan 21, 2010 | 2004 Ford Expedition
Feb 12, 2009 | 2001 Ford Explorer Sport
Sep 16, 2014 | 2002 Ford Expedition
616 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: