Question about Cars & Trucks

Open Question

WHERE IS THE AIRBAG MODULE LOCATED AT ON A 07 HHR

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 63 Answers

SOURCE: 96 honda accord airbag module......

does the srs light come on and go off at random times and sometimes stay on if that is so check the srs switch under your seat it try moving round in the seat applying weight in diff locations and see if it goes off and on if so then you might need to replace that switch

Posted on Mar 16, 2009

Ad
  • 206 Answers

SOURCE: How much oil goes in a 07 HHR?

4 to 4.5 quarts

Posted on Mar 24, 2009

  • 1 Answer

SOURCE: 06 kia sportage airbag control module

If your refering to the light on top of the dash that says "psgr air bag not connected" here;s the deal.

The module is activated when someone sits in the seat. Turn the key on and the notification will light. Go around to the psgr side of the car and sit in the seat and the light should go out.

Posted on May 03, 2009

  • 412 Answers

SOURCE: Needing to locate the airbag control module '07 caliber

it is located behind the floor shifter in center console..under small piece of carpet

Posted on Jun 20, 2009

  • 462 Answers

SOURCE: 2005 honda crv airbag module location

Most of the time it's in the middle of the car under the center consol(consol with stereo) , SRS module usually mounted on the floor.

Posted on May 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2007 silverado classic crew cab. The airbag ecu or airbag module needs to be replaced i need to know where it is located. code b1000


Oney, I think the airbag ECU is under the drivers seat, under carpet
or could be under center console if equipped. Seat or console will have to be removed to access. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
GM recalls 330 000 fullsize trucks for airbag replacement
DIY How To Installation Airbag Module Reset Overhead Consoles Speedometer...
New Recall 09184 07 09 Silverado Sierra Truck Forum Truck Mod Central

May 26, 2016 | Cars & Trucks

1 Answer

How to fix b0019-0d


There are two junction connections on the four wire harness that runs from the SDM (airbag controller under driver seat) to the passenger side airbag (I/P module). Once connection is just below the passenger side airbag in the dash and another is behind the driver side kick panel.

In my case, the connector behind the driver side kick panel had likely a bit of corrosion and there was high resistance that thre the service airbag message and light on the dash. Once I cleaned this connection, the light was gone and the problem is now fixed.

High resistance in either of these connections will throw the B0019 OD code.

Dec 18, 2014 | 2010 Chevrolet HHR LS

1 Answer

Airbag module


On most GM models the module is in the center of the dash on the firewall.

Jun 05, 2013 | 2006 Chevrolet HHR

1 Answer

Chevy hhr starter location


Starter located on the engine, from under car look between engine and radiator, where engine connects to transmission, that is the starter. Check links below, press the helpful button
Chevy HHR starter location and removal

Going under the Chevy HHR

How to Test and Troubleshoot Starter Problem

Time to replace starter 07 HHR 2 4L Chevy HHR Network


Dec 03, 2012 | 2006 Chevrolet HHR

1 Answer

2006 hhr has code for cam sensor/diff module? will this make tc light and engine come on also rough shifting.....where is this located on vehicle?


Stand in fromnt of the car, the cam shaft position module is located on the front of the engine to the right hand side just below the fuel rail.

Jul 12, 2010 | 2006 Chevrolet HHR

1 Answer

I started my 07 escalade esv in the morning about 1 weak ago and the service airbag light apeared and i was hoping it wold just go away in time but it dident i have about 120.000k in the car any cheap...


its better to go to service center and diagnostic tool will tell you which of your sensors or airbag module have the problem, i wish that no deployment happen because if deployed is commanded you will change the airbag main control module, repair acording to the dtc codes and diagnostic aid, if the problem is module such as side airbag, curtain, drivers airbag or the passenger airbag, you may connect the two wire by 2.2 ohms resistor 2watts. if you want little cost but the disadvantage is, what ever happen in your car, there is no airbag deployment even the computer will command to deploy in case of accident, my suggestion to you is not advisable but its about you

Jun 26, 2010 | Cars & Trucks

1 Answer

Where is the airbag diagnostic module on my 1996 aerostar? getting code 51


The code you have indicates that the internal fuse in the airbag control module has been blown; this happens automatically when a short to ground occurs in one of the airbag circuits in the vehicle. This is a safety feature designed to prevent injuries due to accidental deployment of the airbag due to an electrical fault; the module blows the fuse intentionally to disable the system. the fuse is not serviceable; a new airbag module must be installed after the short to ground has been located and repaired. The air bag diagnostic module is located at the center of the dash panel, below the integrated control panel

Nov 06, 2009 | 1996 Ford Aerostar Extended

1 Answer

Needing to locate the airbag control module '07 caliber


it is located behind the floor shifter in center console..under small piece of carpet

Jun 16, 2009 | 2007 Dodge Caliber SXT Sport Hatchback

1 Answer

Mazda 323 1997-transfer the drivers airbag to a similar vehicle


Hey,
take a look at www.airbagmodul.com

They're working in Airbag-Simulators and Occupancy Sensor-Simulators.

Regards

Gerrit

Mar 19, 2009 | 1999 BMW 323 Series

1 Answer

Removal of dirver airbag


USE A SMALL flat blade screwdriver and insert in the back of wheel there are spring clips that release it you will see an opening on each side

Nov 14, 2008 | 2006 Chevrolet HHR

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

189 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...