Question about 2001 Chrysler Town & Country

Open Question

2010 town and country windshield washer not working

The front windshild washers do not work but the rear does, comes out of the same pump

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
geo_jonas
  • 555 Answers

SOURCE: I can hear the humming sounds of the washer pump but no fluid

The best recommendation i have is to find a mechanic in your place to see and check the problem in your car. Also to let that person scan all other problem that might as well affects the current problem you have. Atleast you can assure to your self that you are driving a safe and functional parts car. 
Hope this help address your problem. If you need more assistance just contact me. Thanks

Posted on Jun 19, 2009

Ad
Midwest-Tek
  • 864 Answers

SOURCE: 2003 Chrysler Town and Country.

In my experience i would say its the pump. But if you look in your owners manual there will be a fuse diagram. From there you can check the fuse. Also if you know where the fuse boxes are located you can look on the backside of the lid that closes the fuse box there is a diagram. That will help you locate the fuse. If you need further assistance please let me know. Thanks, Midwest-tek

Posted on Aug 31, 2010

  • 1915 Answers

SOURCE: 2000 Chrysler Town and Country:

there is one for the front and one for the back-the back on is inside an access panel inside the door.

Posted on Dec 24, 2010

Testimonial: "Fast response and clear description. Top rank advice/advisor. "

sparky1500
  • 1066 Answers

SOURCE: 03 town and country front

did you change the thermostat? the thermostat can get either stuck open or closed...

Posted on Jun 28, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 town & country rear washer does not work


replace the washer pump theres one for front and one for rear

Feb 18, 2014 | 2002 Chrysler Town & Country

1 Answer

Front windshield washer pump not working, replaced pump but still does not work, when button is pushed in the wipers come on but pump does not hmmm. like usual


get a test light and disconnect the washer pump motor and connect your test light to the motor harness and have someone push the spray button. If the light comes on, then you bought a faulty motor. if it does not come on then there is a blown fuse or a break in the circuit .

Jun 28, 2011 | 2003 Chrysler Town & Country

1 Answer

Front windshield washer motor is not working, but the rear one is. what could be the problem? have checked the fuse and that is ok. what can i do to fix the problem?


use a cheap probe type 12V tester and check the output at the plug on the washer pump motor when the wash button is pushed. If you have power to the plug then the washer pump motor is bad or poor electrical connection. If no power to the plug then the multifunction switch may be bad. either way about $50 in parts from rockauto.com

Sep 02, 2010 | 2001 Chrysler Town & Country

1 Answer

Mercury villager 1994 washer pump not working


the pump motor likely is bad. get a used washer fluid reservoir at a pick n pull yourself or at car-part.com. page with * is lowest cost.

Pump and Reservoir, Windshield Washer Removal
  1. Disconnect the battery ground cable (14301).
  2. Raise and support the vehicle.
  3. Remove the RH wheel (1007).
  4. Remove the RH front fender splash shield (16103). Refer to Section 01-02 for the removal procedure.
  5. Remove the windshield washer reservoir top bolt.

  6. Disconnect the windshield washer reservoir fluid level sensor electrical connector.
  7. Disconnect the rear window washer pump electrical connector from the rear window washer pump.
  8. Disconnect the windshield washer pump electrical connector from the windshield washer pump (17664).
  9. Place a suitable drain pan under the windshield washer reservoir (17618) and drain the washer fluid.
  10. NOTE: The rear window washer hose end is color-coded, matching the connector on the rear window washer pump. Match the colors to ensure proper installation.

    Disconnect the washer hoses from the windshield washer pump and the rear window washer pump on the windshield washer reservoir.

  11. Loosen the two windshield washer reservoir side bolts.
  12. Remove the windshield washer reservoir by sliding it out of the side slots.
  13. Remove the windshield washer pump.

    Installation
To install, reverse the removal procedure. Tighten the lug nuts (1012) to 98-118 Nm (72-87 lb-ft).

Sep 09, 2009 | 1994 Mercury Villager

2 Answers

Washer doesn't work and I can't hear the pupmp motor working.


The windshield washer pump is part of the windshield wash reservior.
There is an electrical connector located on the bottom of the reservior.
That is the pump .
If the pump is not in the reservior. I would just trace the washer fluid lines from the sprayer on the vehicle back to the pump. The lines just might lead back to the reservior for the windshield wash solution. Then you will have confirmed the pump is in the reservior.

You may have to get a new reservior. The pump might not be seperate item, I am not 100% sure on that.

I also would double check the fuses and any relays related to the washer pump.

Finally, I would check the washer switch if you replace the pump and still is not working .

Good luck

Mar 31, 2009 | 2002 Chrysler Town & Country

1 Answer

Rear windshield washer motor works, but no fluid comes out


Rear washer may have it's own reservoir . Can you hear a pump humming when you activate the washer? Look in the under flooor compartment

Mar 22, 2009 | 1997 Chevrolet Suburban

Not finding what you are looking for?
2001 Chrysler Town & Country Logo

Related Topics:

148 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8582 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...