Question about 2003 GMC Sierra 1500

2 Answers

Truck wont turn over

All lights and guages work, I can hear the relays clicking when i turn the key but the starter doesnt enguage. I tried everything that i know it wont start with a jump either

Posted by on

  • matkrick Feb 02, 2009

    I had a mouse liveing in my fuse panal under the hood. It had LOTS of pretty wires to chew on

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 141 Answers

Have you checked to see if the starter itself was good? Could also be a loose or dirty battery cable at either ends. Ignition fuse under the hood. Hope this helps. Best wishes to you.

Posted on Jan 26, 2009

  • Bryon Agin Feb 03, 2009

    Glad to hear that you found the problem. Take care and God Bless.

    Bryon

×

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

Check for power to and from ignition switch,there is also a fused link that can protect the wiring, or keep it from working.Jump starting can make this happen if the proper connections are not made.look at the starter is wiring ok?Make sure you move the shifter out of park and then back,to be sure it is all the way in park,as any miss alignment will not let starter engage.Good luck!

Posted on Jan 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wont even start.


Where do you hear the clicking sound coming from starter relay in the under hood fuse/relay box or at the starter solenoid . Have battery an connections checked !

Jun 10, 2016 | 2007 Saturn Vue

1 Answer

On my 09 cobalt im not getting any primary fuel pump activity and when i turn the key to start starter does not enguage all relays clicking inside and under hood normaly


hook up a to the obd and comand the ecm to prime the fuel pump if it doesnt prime its the ecm providing wires and relays are good

Jun 11, 2014 | 2009 Chevrolet Cobalt

1 Answer

2002 chevy corvette wont turn over


first ensure good baytery and connections both at battery and connecting points . check all fuses associated with starting and security ignition etc... check dash lights in run position if on proceed if off look into that first. check to see if the security light comes on for a few seconds and goes off. if it does then proceed to start/ if security light stays on or flases continiously then look into security issue. if when key is in crank over or start position listen to hear if you can hear starter relay/ solinoid on starter try to enguage if not trying to start check neutril safety and or clutch swich is working etc if all this is checking out ok use test light and see if when in start position there is power at solonoid wire( the small wire on starter by itself) if not try jumping power to it bu make sure in park and or neutril position or car may leave you if starts not a funny seen!! good luck!!

May 07, 2014 | 1972 Chevrolet Corvette

1 Answer

I have a 1998 GMC Jimmy, put a different engine from a 1996 gmc jimmy in it, its been running great and here about 2 weeks ago it started giving me problems, I put the key into the ignition turn it to...


the signal flashing is a bad hazard switch. they all brake. if you hold the flasher buton just the right way the noise stops. sounds like your dash is shorted with the flasher

Mar 13, 2013 | 1998 GMC Blazer

1 Answer

My 2006 buick lacrosse wont start radio and lights work but its not saying nothing when i try to crank it


Hello! Do you hear a click when the key is turned?...If no click is heard either the ignition key, the Crank relay, the starter, or the battery are suspect...Having lights and radio does not mean the battery is capable of running a starter motor......Put a meter on the battery...should read 12.5 volts...Turn key...Does voltage drop to 8 or 9 volts? Bad battery...If all is well with battery and connections to it...Check the starter fuse # 33 in the under hood fuse/relay box...If the fuse is good that click you should hear is from the Crank Relay in that box...If all of the above is OK connect your meter to the Purple wire that is connected to the starter motor...When the key is turned 12 volts must be on that wire...If there is the starter motor is defective...So, #1...Do you hear a click when key is turned...That would point at a bad starter or weak battery...#2...If you do not hear a click bad fuse #33, bad Crank Relay, bad ignition switch...#3...If fuse is good Bad Crank Relay or Ignition switch; Crank Relay is a low cost item ($10)...Replace Relay...Stop there and send a comment as to results...Guru...saailer

May 06, 2012 | 2006 Buick LaCrosse

1 Answer

The motor wont turn over i have power to everything else. i turn the key and the motor doesnt even click or attemp to turn


possible starter issue, try to lightly tap starter with hammer, be very cautious when doing so, you will damage starter if you hit it to hard, after tapping starter start car if that does not work another simple possibility is the steerwheel lock, with ignition on off possition turn steering wheel, listen for click, then turn key to start.

Mar 21, 2011 | 1988 Ford Mustang

1 Answer

Wont start. when i turn the key all the lights work but it doesnt turn over. i can hear a clicking noise that comes from the relays


check your battery,and your starter
make sure the battery is up 12.4 volts if it is good then make sure you have power going to the starter,when you turn the key you should have power to the selnoid,if you have power there and the starter does not turn ,then the starter is bad.

Aug 15, 2009 | 1998 Oldsmobile Intrigue

1 Answer

1995 nissan pu wont start... everything turns on


check for power to the starter at the starter's connectors while you have someone turn the key. If there is power, change the starter. If not check your ignition switch, (manual trans)clutch pedal switch, and starter fuses/relays. Hopefully this helps

Jul 19, 2009 | 1995 Nissan Pickup

1 Answer

1999 Isuzu trooper wont start everything works lights, guages but makes no noise when key is turned to start it , could it be neutral safety switch in shifter?


If you hear a click when the ignition is turned but no start its a high possibility that its the starter or the wiring going to and from the starter. Hope this helps! ~Derek~

Jun 20, 2009 | 1998 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

299 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

63801 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...