- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
My Vauxhall (Opel) Zafira 2004 1.8 liter 16V Petrol Auto
had COLD START problem; cold engine does not start no
matter what! I have changed the following parts, one after
1. New Coil pack
2. New Spark plugs
3. New Battery
4. New Mass Air flow oxygen meter
5. Air filter
6. Oil filter
7. Engine oil
8. Fuel filter
9. Premium Petrol
10. Engine coolent water sensor
Still the same problem. Then changed 'Crank sensor'. And
now the car starts fine without any issue!!
Faizur Rahman <email@example.com>
I have a vauxhall astra 2002 1.6 sxi. Ive just put in a mirror switch as the last was broken when I purchased car. The switch has been tested and is working but the mirrors dont work? Cant find a fuse which is specifically for that. Can anybody help?
I cannot find a EL20B in my data,but all Astra listed had the same head sequence as shown:
10 6 2 3 7
9 5 1 4 8
the torque specs for the C20XE,C20NE,X20XEV were all 25nm(18lb/ft),-then 90 deg,-90deg,-90deg. Z20LET were as above plus an additional 15deg. Same data for smaller and larger engines(except a couple that were 45deg instead of 15) Make sure that you replace the head bolts with new,they are torque to yield bolts that are designed to stretch to 'plastic' state,and should not be reused. Put grease(graphite if you have it) under bolt heads and washers,oil the threads. Usually the head sets come with the torque specs. I hope this helps you.