Question about 2000 Suzuki Grand Vitara
How do you remove the bulb?
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Four or six cylinder engine and behind or front of the oil filter? Looked under my GV 2007 2.7 V6 and can not locate a shiny metal box next to the oil filter. Only thing that was shiny was the exhaust manifold and oil sump which are quite hard to break or puncture. If it was the oil sump you will have to remove it and get it welded as a bog will not hold on heated engine parts.
Posted on Nov 02, 2008
Remove the clips that secure the top of the radiator grille. Pry up the center piece and pull up the clip to remove it. There are 5 screws on the bottom of the grille piece that you have to take out. BE VERY CAREFUL with the grille when pulling it out as it idoesn't take alot of force to break it. Next undo the screws that secure the headlight housing (3 total), there is also something called a guide pin on the housing. Detach the connector from the bracket by squeezing the lock tip with pliers. That should give you complete access to the lamps inside the housing.
Posted on Apr 10, 2009
jack up one side at a time without the ebrake on as that will engage only the rear brakes remove lugs and have a good hammer handy and tap on the drum until it will pull off
Posted on May 19, 2009
SOURCE: Water pump
Hello nedy...if you have the V6 engine, it will require the removal of the timing chain cover to access the water pump. The water pump is mounted to the engine block with 4 bolts. It is recommended that the bolts be replaced due to electrolysis (steel bolt in aluminum block) Replace all gaskets and o-ring seals as well.
While you are in there, you can inspect the timing chains, it has 3..and the chain tensioners. A Haynes repair manual would be helpful on this project and will have the correct torque specs.
Good luck...i hope this helps, please rate mr a fixya.
Posted on Jul 27, 2009
Tips for a great answer:
Jul 03, 2016 | 2003 Suzuki Grand Vitara
Mar 01, 2015 | 2008 Suzuki Grand Vitara
Feb 10, 2015 | 2010 Suzuki Grand Vitara
Jan 21, 2015 | 2000 Suzuki Grand Vitara
Jun 08, 2014 | 2001 Suzuki Grand Vitara
Dec 19, 2013 | 2006 Suzuki Grand Vitara
Jan 12, 2011 | 2000 Suzuki Grand Vitara
Mar 06, 2010 | 2000 Suzuki Grand Vitara
Jan 13, 2010 | 2000 Suzuki Grand Vitara
33 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: