Question about Infiniti Q45
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
With the new lock cylinder in it, turn the key on. The security light should blink. Leave the key on for 10 minutes, the security light will quit blinking and go out after 10 min. This will reprogram your security system and the car should start. Also leave a battery charger on it while the key is on, If the battery goes dead during the 10 minute reprogram sequence, you will have to start over again.
Posted on Mar 08, 2009
The factory security light will remain on - this is a standard feature indicating the car is dead.
First, unplug the hazard fuze in the engine bay (this will reset the ecu and remove the flashing)
Next, replace the battery with a new one (or one with proper charge) - keep in mind a small battery will not do anything for these cars, the engines require a lot to push them over (it isnt a honda)
*Make sure to clean the positive and negative battery cables from acid
Then just start it up :)
Posted on Apr 06, 2009
If the previous solution doesn't work, try this:
While the key is in "on" position and your security light is blinking, it is probably your "Passlock" security device acting up. Very common in these years for GM cars. To test if this is it, simply turn your key forward (to "on" position) until light stops blinking and eventually turns off (right around 10 minutes). Then, turn key back off, and then try to restart it. My Alero did this just a few months ago and I learned this trick as I was pricing out a new fuel pump. If this was your problem, I recommend taking it to a remote starter installer and have them by-pass the passlock system permanently. This should cost anywhere from $40-$100, but is much better than a new fuel pump and filter cost.
-note: I recommend not getting it by-passed until it happens a second time (which it may not), just don't forget the temporary fix!
Posted on Jan 14, 2010
U will need to bypass the factory VATS (vehicle anti-theft system) system, it is very simple and all you need to know is at the web page link below.
Posted on Jul 20, 2010
Tips for a great answer:
May 17, 2016 | 2003 Chrysler Sebring
Oct 23, 2014 | Volvo S80 Cars & Trucks
Oct 10, 2014 | 2000 GMC Jimmy
Jan 31, 2011 | 1996 Buick Regal Olympic Gold
May 14, 2010 | 2000 GMC New Sierra 1500
Mar 25, 2010 | 1998 GMC Jimmy
Aug 12, 2009 | 1995 Jeep Grand Cherokee
Jul 22, 2009 | 1999 Pontiac Grand Am GT
Mar 08, 2009 | 2000 Oldsmobile Alero
Feb 09, 2009 | 1993 Pontiac Bonneville
54 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: