Question about 2001 Nissan Maxima
Its making a weird buzzing noise and the signals wont come on
The Monte uses a single flasher unit that integrates turn signal and flasher functions. It is mounted in a junction block that is attached to the firewall just to the left of the steering column under the instrument panel. To get at it you have to remove the the sound insulation panel that is attached to the lower steering cover and then the lower steering cover as well.
Posted on Jan 19, 2013
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Turn signal light flasher unit
Remove the dash cover that has the fuse cover dorr on it (2 screws). Then remove the metal bracket ubder this panel (4 screws). Look up on the side next to center console.Next to a blue box is the flasher. Know if someone can figure out how to remove flasher let me know.
Posted on Jan 18, 2009
next step after replacing fuses is to check relays,receptacles themselves and bulbs youll need a multitester with dc volts setting
first remove relay and have them checked or check them your self by making sure power is coming out of relay wires once turn signal is active using multi tester at 20 dcv setting if power is coming out relay is good
then remove bulb from turn signal housing and test if power is coming into socket same setting if so replace bulbs
Posted on Feb 06, 2009
you have a busted bulb, your hazard may be working fine but the bulb is double contact so one part is working and the other is not. just check which bulb is busted.
Posted on Apr 24, 2009
SOURCE: location of the signal flasher
under the dash, just forward of your right knee when you're sitting in the driver's seat. You first need to remove the 10mm bolts and 3 screws that secure the cover. There should be a black box that controls the stop/tail/turn signals. The harness has about 7 wires plugged into it. if need help finding location turn on your emergency flasher and listen to it and follow the sound.
Posted on Aug 28, 2009
Tips for a great answer:
Apr 24, 2013 | Cars & Trucks
Jun 23, 2012 | 2004 Chevrolet Monte Carlo
Aug 04, 2011 | 2001 Chevrolet Monte Carlo
Mar 16, 2011 | Chevrolet Monte Carlo Cars & Trucks
Aug 29, 2010 | 2001 Chevrolet Monte Carlo
Apr 15, 2010 | 2000 Chevrolet Monte Carlo
Apr 09, 2009 | 2003 Chevrolet Monte Carlo
153 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: