Question about 2007 Chevrolet Malibu

Open Question

TURN SIGNAL WONT WORK WHEN HEADLIGHTS ARE ON

I put on the hazards on and on the passenger side turn signal will work as long as the lights are turned off. I turn the headlights on and then all three bulbs go very dim and pulse with the turn signal. When put on the High Beams and then all three lights shut completely off. Any suggestions I had one suggestion that the relay probably will need to be replaced and I don't know where to find the relay. Thank you in advance.

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
jlgprop
  • 352 Answers

SOURCE: 2005 monte carlo drl won't tun on and i have no Low beams too. High beams, turning signals and hazards works. I replaced the bulbs, still drl and low bemas don't work. Checked all fuses and th

CHECK UNDER HOOD FUSE BLOCK FOR FUSES AND CIRCUIT BREAKER AND RELAYS....IF NOT IT IS AN ELECTRICAL DIAGNOSES. USE A MULTI METER TO SEE IF YOU ARE GETTING CLOSE TO 12 VOLTS AT SOURCE!
***NO EASY FIX...ALMOST EVER!!!

Posted on Jul 30, 2012

Ad
jerry_kramer
  • 3904 Answers

SOURCE: I have a 96 Cavalier and my passenger side low beam does not turn on (high beams OK) & my horn doesn't work either. I've replaced the bulb with no luck. Any suggestions?

The light socket itself could be bad. If you turn on the lights and put a meter on it you can verify there is power at the socket. If not you still have to trouble shoot some more. No power at socket could be wiring that went bad or melted but you will have to remove the socket and test the wires themselves. No power at the wire bare ends you have to go back to the fuse distribution and check that. Low voltage sucks for this very reason. good luck.

Posted on Nov 12, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have all light low, high, all turn signals, but my front right (front passenger side) Emergency Light is the only one that works for the Hazard Lights? Fuses check out good and I believe the relay i


What is your year--make--model? I'd look up wiring for hazards if I knew which vehicle? Your hazards may work through multifunction switch? As far as one headlamp being dimmer, check voltage and ground compare to other lamp/s.

Maybe the headlamp lens needs cleaning?

Feb 16, 2015 | Cars & Trucks

1 Answer

1997 ford crown vic lx.Both directionals work, Hi+lo beam work,but amber driving light on driver side does not. passenger side ok.3157 bulb runs driving and turn signals. I checked the 2 bulb harness with...


Is the bulb holder rusty , it sounds like a bad earth. With a volt meter probe the bulb holder earth to the power terminal should be battery voltage. if not probe power terminal to metal part of body should be battery voltage if not fault in wiring.

Oct 16, 2014 | Cars & Trucks

2 Answers

My turning signals wont come on my 98 honda accord


do all 4 hazards work?
passenger side, light what is that. inside car, or out, if out that is parking side lamps. they are burned out. if only they are out. bad bulbs
the fuses for blinkers and hazzard must be checked first.

Jan 02, 2014 | 1998 Honda Accord

1 Answer

Right front side turn signal does not work replaced all bulbs and checked fuses headlight flashers work when hazards are on front to back except driverside turn signal ,in dash right stays solid left


I don't believe it would be a bad ground for just one light. It could be a wire, a socket connector, or the bulb socket itself. See if the wire has power at the socket when signaling left, with key on. If there is power, probably a bad socket or connector. If no power, check for power coming from flasher-the wire going to front left, or driver's side. If you have power from the flasher, but nothing at the socket, the wire has probably broken.
Good luck.

Feb 06, 2013 | Cars & Trucks

2 Answers

Dodge ram 3500 turn signal - headlight problem


WAY TO GO !!! another "great idea" from vehicle manufactures

Jun 07, 2012 | 2004 Dodge Ram 3500 Truck

1 Answer

Turn signal bulb was working, now it isnt


its is not uncommon for the contacts in the sockets to become corroded or just expand to the point of where they do not contact the bulb,try to test the socket with a multimeter for voltage,if it has voltage then its most likely the contacts,which sometimes can be rebent,but replaceing the sockets is a better solution,and can be picked up at most stores or 4x4 shops and junk yards.

Dec 14, 2011 | 1998 Jeep Cherokee

1 Answer

Driver side signals only work when headlights are OFF


What may have happened is either the headlights wiring or the parking lights wiring somewhere along the wiring fused to the left turn signals wiring. Depending on if the turn signals go on when you put the parking lights on or the headlights on.

If the signals come on when you turn on the headlights than you only need to locate the light green wire that comes off the left turn signal harness.

Next follow that wire the entire way back to the firewall looking for another wire fused to that wire as you go.

If there are no signs of this you need to continue looking on the other side of the firewall all the way back to the turn signal and hazard flasher unit which is a black box that connects to a black harness located next to a grey harness behind the knee bolster.

But if the signals come on when you turn on the parking lights than you will also need to check the wiring from the rear left signal and follow that light green wire all the way back to the turn signal and hazard flasher unit.

This should fix your problem, but if not than your problem may lay within the the wiring between the turn signal/hazard switches and the turn signal and hazard flasher unit.

Also you may have a burnt circuit in the junction block. This block is where the light green from the rear left signal and front left signal meet. Don't have a description but if you cannot find it let me know and I will go out to the yard and look myself and let you know.

Apr 22, 2009 | 2004 Dodge Intrepid

2 Answers

Turn signals wont work or hazards?


check the relay under the hood might also br a shorted wire around damaged are, or headlight switch or even ignition switch

Feb 18, 2009 | 1999 Dodge Durango

Not finding what you are looking for?
2007 Chevrolet Malibu Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6924 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...