Question about Cars & Trucks

Open Question

97 blazer missing and runs rough multiple misfire

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 18 Answers

SOURCE: have code for cylinder #1 misfire on 96 chevy

these were bad for the spider injectors to fail. they are hard to diagnose with out the scan tool. the poppets in the end of the injectors get clogged and will need to be replaced. pull the plug and see if its oil fouled. they also have a problem with the #1 cyl getting out of round and oil fouling the plug. compare it to another plug in the engine. if its oil fouled the engine is no good.

Posted on Nov 07, 2009

  • 24 Answers

SOURCE: po300 multiple misfire on 2003 Toyota highlander

catalytic converter is plugged

Posted on Apr 19, 2009

  • 135 Answers

SOURCE: 2002 cadillac escalade ext misfire, shifting problems,

change spark plugs,check for valcum leaks. multiple misfire is spark plugs,coil or wires

Posted on May 19, 2009

  • 232 Answers

SOURCE: Tacoma 4cyl idles rough, heditates, multiple misfires

Possible fuel delivery problem, fuel pump, fuel line, clogged fuel filter, leaking injectors or injector O-rings, faulty pressure regulator etc. Check your fuel pressure.

Posted on Jun 20, 2009

  • 79 Answers

SOURCE: rough idle

Barring any mechanical issues you most likely have a failed injector.

Posted on Aug 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P0305 and p0200 on a 2003 chevy blazer 4.3 , runs really rough


P0305 is a misfire on number 5 cylinder replace spark plugs, wires cap and rotor button. Please note: Does the ac cooling line/hose go over top the distributor ? If so GM/CHEY had a problem when dripping from that AC line/hose dripped down onto the distributor. That caused miss fires after a time. I hope this helps, Lee.

Feb 09, 2014 | 2003 Chevrolet Blazer

1 Answer

97 chevy blazer rough idling problem? help?


It is hardly ever the spark plug or only the spark plug - generally for some reason there is a weak or lost spark and the reason must be found and rectified by carefully checking and then replacing any components found to be edfective - plug wires, coil, distributor cap, rotor (if fitted), wiring, connections and could conceivably even be the ECU. Perhaps the misfire is due to injector trouble...

Sometimes a fault with persist even after it has been "cured" until the fault code is erased with diagnostic equipment.

Jun 26, 2017 | Chevrolet Blazer Cars & Trucks

1 Answer

HEVROLET BLAZER 2000 MISFIRING


Timing is off,problem with timing chain,also check fluids in ******,plus also if you have a distributer in your vehicle,if it is cracked,moisture getting in and ruining the points,-that is if your vehicle has a distributer! This will make a vehicle run rough as well.
You can have new plugs put in,but if your spark plug wires are cracked or worn,this will also creat misfire and backfiring.

Jan 25, 2012 | 2000 Chevrolet Blazer

1 Answer

I changed the belts on my 97 intrepid 3/3 ltr a couple weeks ago and it stated running rough and misfiring. Changed the plugs, wires and coil pack and it is now misfiring and stalling?


changing belts will not cause this problem.when changing the plugs did you check the plug gap or just assume the plugs were gapped properly.this could be one problem.did you change the wires one at a time or did you pull off multiple wires and change them,this could be another problem(wires not in proper location).you could have an intake gasket that is bad causing a vacume leak,which can cause miss fire.it could be a fuel injector problem(either electrical or fuel).is the check engine light on,this is a starting place have the code pulled.these i would check out.

Apr 19, 2011 | 1997 Dodge Intrepid

1 Answer

Did a complete tuneup and cleared code but i still get cylinder misfire or multiple cylinder misfire.


is the timing correct did you do a compression test on engine possible engine misfunction does it run rough and miss no power

Jan 25, 2011 | 2001 Chevrolet Blazer

2 Answers

My 01 chevy blazer will idle rough. it gives me error codes, p0300 and p0135 and p0141. where do i find these problems


Hello your po135 is o2 sensor bank 1 your po141 is O2 sensor bank 1 sensor 2 and your pO300 is random multiple cylinder misfire these problems are your oxygen sensors and engine misfire pO300 is you engine missing o2 sensors are switches in the exhaust system the engine misfires are the engines cylinders missing.

Jan 05, 2011 | 2001 Chevrolet Blazer

1 Answer

My blazer is having trouble accelrating past 40 mph, the vehicle is running rough and slugish once it gets up to 55 the service engine light blinks i hav e changed out the mass air flow and did a fuel...


check the #3 O2 senser that is located just in front of the cat. really check the wiring that it connects to in that area, as mine had a wire pinched between the frame and the body ( from the factory) that eventaulaly wore through and casued the sensor to fail. usually no error code was set and the engine would stumble terrible from 40 to 60 mph. Had to replace the sensor with new, and clean out corrosion IN THE CONNECTER before everything was resolved.
there are 4 O2 sensors in the 97, 1 on each bank, 1 just before the cat and 1 after the cat. the one before the cat appears to be critical to set mixture, so check or replace that one first

Dec 09, 2010 | 1997 Chevrolet Blazer

1 Answer

Multiple cylinder misfires 2001 Dodge Intrepid


If the engine is not missing now or running rough,The code may be an old one stored in the computer,
The code for Evap usually comes from someone getting gas and not tightening the fuel cap so it clicks at least four times.

Nov 18, 2009 | 2001 Dodge Intrepid

1 Answer

97 chev tahoe service engine light is on and it wont start


P0300 is random multiple misfire. If its been more then 3years since the last tune-up, do one. Usually it is caused by debris inside the distributor cap but could also be plugs wires, fuel and air filter.

Apr 28, 2009 | 1997 Chevrolet Tahoe

1 Answer

Misfire trouble codep001


Maybe bad plug wires or cap and rotor. I'd replace.

Mar 25, 2009 | 1997 Chevrolet Blazer

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...