Question about Cars & Trucks

1 Answer

Whenever I turn it on, it just stays on safe mode.. It won't play anything. How do I get it to work again.?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 16,166 Answers

What is the make and model

Posted on Jan 19, 2013

  • 2 more comments 
  • pixiegirl381 Jan 30, 2013

    It is a 2001 vw golf 1.8t

  • Brad Brown Jan 30, 2013

    So we are talking about an OEM in car stereo?

  • pixiegirl381 Feb 03, 2013

    I have no idea, it just stays on safe mode. And if I try to put a cassette with the auxiliary cord on it to plug into my phone, it switches from side a toside b and then comes outs

  • Brad Brown Feb 03, 2013

    Try changing the direction that you insert that converted tape in. The problem is that the tape deck thinks that the inserted converter is a tape that had reached the end of its spool

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Periodically cuts into safe mode


You need the system scanned by the dealer for fault codes that caused the CEL to turn on.

Nov 21, 2013 | Toyota Cars & Trucks

1 Answer

Little red engine light comes on and car slows


The engine light is telling you that a fault has been detected by the cpu in the parameters of the sensors that it constantly monitors. If the car slows it is going into safe mode to protect something. Have the fault codes read and repair faulty units.

Apr 04, 2013 | Cars & Trucks

1 Answer

I had my 94 sub(2500)checked and it needs tie rod ends, adjustment sleeve, idler arm and a center link plus alignment. abs light stays on and when braking i have pulsation but its stops ok. it also has...


It should fix the play in the steering but it won't do anything for the ABS. There's also nothing out of line with the work he is suggesting, in terms of steering play. Hope this helps.

Sep 25, 2011 | 1994 Chevrolet Suburban

1 Answer

When I go to turn on the radio it just reads "safe" and won't work or play anything. AT first i thought it was a battery issue but the battery has been charged and works great yet the radio...


IMPORTANT NOTE:
You must have the security anti-theft code for your Audi radio from the car manufacturer, or from an Audi dealer!


You can find the radio code at: http://www.radio-code.co.uk/

The sequence of Audi radio programming is:
1. Push simultaneous "SCAN" and "RDS" keys until on the screen will appear "1000" displayed.
2. Release keys. No more push on "SCAN" and "RDS" keys because otherwise number "1000" will be considered as first safe code attempt.
For example: we have the security code "5079". Then:
3. By the no.# 1 key you will set up the first safe code digit. Push 5 times on the no.# 1 button. The "5" number will be setted.
4. By the no.# 2 key you will set up the second safe code digit. Push 10 times on the no.# 2 button. The "0" number will be setted.
5. By the no.# 3 key you will set up the third safe code digit. Push 7 times on the no.# 3 button. The "7" number will be setted.
6. By the no.# 4 key you will set up the four-th safe code digit. Push 9 times on the no.# 4 button. The "9" number will be setted.
7. Then push again simultaneous "SCAN" and "RDS" keys for confirm this safe code. On the screen will be displayed "SAFE" notice. Release keys! For few seconds a radio frequence will be displayed.

The radio is now ready for use!

Jun 07, 2011 | 1988 Audi 80

1 Answer

About 5 years ago my 95 buick skylark transmission went into safe mode for some reason. it still had park, reverse, neutral, but when put it into drive it would go into 3rd gear and stay there. It was...


Some issues with the engine or trans, can cause a third gear start (limp home mode) Dont get to happy it did not fix its self for good someone with a code reader might be able to steer you in the right direction ( A lot of codes get stored in the computer that never turn on the check ending lite ) Good Luck

Aug 26, 2010 | 1995 Buick Skylark

1 Answer

1996 jetta will not start safe message shows on radio dose this have anything to do with alarm system


yes when the battery dies or was disconnected it put your car into safe mode you have to lock doors and go and open the passager door to shut alarm off safe mode will not go away unless the 4 digit code off of the back of radio is enterted then the raido will work again

Dec 27, 2009 | 1996 Volkswagen Jetta

1 Answer

Trans drops into 3rd gear won,t shift to 4th


DTC P0734 is "4th gear incorrect ratio" - that's your torque converter 'LOCK UP Clutch" It's worn out (or you're using the wrong Trans Fluid required by Hyundai - SPIII OR Both). The P1624 is simply the Trans Control Unit (computer) communicating to the Engine Control Module (ECM computer) MIL - on request signal to ECM = asking it to turn on "Check Engine" light. MIL = Malfunction Indicator Lamp. When the torque converter 'lock up" clutch slips or doesn't engage, the trans automatically returns to 3rd gear and stays there (it's called 'fail safe' mode) until you cycle the ignition key, then everything resets until the malfunction occurs again.
You'll need to have an AT (Automatic Transaxel) tester hooked up to verify this. Hyundai has a Service Bulletin specifically for "gear incorrect ratio' codes. If when you changed the trans fluid, was it done at a Hyundai Service Center? If not, someone may have installed the wrong fluid.

Jun 01, 2009 | 2000 Hyundai Elantra

1 Answer

Battery Replacement now resets ??


Whenever battery power is disconnected, windows can "forget" their settings. Lower both windows simultaneously. Then raise them. When closed let go the window controls for one second then pull them up simultaneously again and hold for a count of three.

Thant should reset your windows.

Good luck.

Dec 06, 2008 | 2001 Audi TT

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

13 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...