Question about Cars & Trucks

1 Answer

2002 Nissan sentra serpentine belt replacement I would have just replaced how it came off but the old one shredded and came off when I was 500 ft from my house. I tried loosening tension pulley and re

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Cars & Trucks Master
  • 14,381 Answers

Just as I thought,you will have to get under truck and turn tensioner from there and have some help with belt at top,here's a link showing you how.

Posted on Jan 19, 2013

  • 4 more comments 
  • buck wike Jan 19, 2013

    I have done so but again not loose enough to get over alternator

  • Thomas Perkins
    Thomas Perkins Jan 19, 2013

    Do you have the tensioner turned as far as it can go when putting belt on?need 2 people too.

  • Thomas Perkins
    Thomas Perkins Jan 19, 2013

    Tighten pulley back up,keep tight.

  • buck wike Jan 19, 2013

    The pulley bolt was loosen all the way the pulley itself is about to come off. I am only by myself

  • Thomas Perkins
    Thomas Perkins Jan 19, 2013

    Push tensioner all the way and hold,have someone put belt on and look and make sure it is good all the way around.

  • Thomas Perkins
    Thomas Perkins Jan 19, 2013

    Would come over and help but.

×

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: 2005 Nissan Sentra 1.8S, with AC - how to replace belts?

first of all you don't have to loosen the pulley,this will no solve the problem,well you already loosen the adjuster,good,bot thing you have not done i will tell you now,on the power steering pump where the belt pass there is also a bolt that hold it ,you must loosen that also,then after you will see the pump moving on the two position that means you will see the belt loosen on 1 position an d the position it will tight the belt,try that man.............

Posted on Aug 23, 2009

  • 484 Answers

SOURCE: 2006 Nissan frontier 4 cylinder belt diagram + tensioner pulley

They are under the hood or on the front crossmember.

Regards,
matt

Posted on Sep 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change power steering belt


How To Change The Serpentine Accessory Belt On Nissan Maxima Altima Etc

Nissan Drive Belt Tensioner and Belt Replacement 3 5 Front Wheel Drive

There are several videos on how to change out the serpentine belt For more info just do a web search " 2002 Nissan Altima serpentine belt replacement".

May 26, 2014 | 2002 Nissan Altima

1 Answer

My serpentine belt is missing ribs...how long can i drive on this?


WHEN DRIVE BELT MISSING RIBS OR HAVE CRACKS RUNNING PARALLEL TO V PORTIONS OF BELT.THE DRIVE BELT NEED REPLACING SOON AS POSSIBLE.

Dec 05, 2010 | 2002 Nissan Sentra

1 Answer

Changing the serpentine belt on an '02 nissan sentra


usually with a serpentine belt the trick is the tensioner. You need to be able to move it to release and replace the belt. the only other thing is the routing of the belt. several special tools are sold to move the tensioner. some are long bars with different types of attachments and some a ratcheting bars with the same attachments. Sometimes you can do it with a standard retchet but not always. Wish i could be of more help maybe you have a harbor freight in your area and they sell an inexpensive one you can use. good luck

May 02, 2010 | 2002 Nissan Sentra

1 Answer

How do i change alternator belt on 1996 nissan sentra


Click on the following free direct Link. It has several Diagrams including the correct Serpentine/Drive Belt Diagram for your 1996 Nissan Sentra 1.6L DOHC In-Line 4-Cylinder. Included are Instructional and Directional Diagrams including how to remove/replace your Alternator Belt and set the proper Tension.

http://www.2carpros.com/car_repair_information/year/1996/make/nissan/model/sentra/1996_nissan_sentra_drive_belt_routing_diagram.htm

Let me know if this helped, or if you have additional information questions. Feel Free to contact me at FixYa.com!



Apr 06, 2010 | 1996 Nissan Sentra

1 Answer

2002 nissan sentra serpentine belt diagrams


2002 Nissan Sentra Serpentine Belt 2.5 litre

Go to the following web site (copy and post the web address to your browser)

http://www.daycoproducts.com/daycoweb.nsf/cf652a4feb630ad0862571a4005ae40c/a866a821123f887c862571a5006988df!OpenDocument

There are 2 PDF documents above the photo. The first gives you the Routing guide for the vehicle/engine - 6-18 0n page 98 and the second document ( Illustration PDF) gives you the belt routing diagram for 6-18.

Hope this gives you what you need.
Cheers
Sean
Voluntary contributor.

Dec 11, 2009 | 2002 Nissan Sentra

1 Answer

1996 nissan sentra


Using a short socket of appropriate metric value, and a pry bar; Push the pry bar toward the firewall to loosen the tension on the belt. It's not that hard once you buck the initial spiral spring pressure of the tensionor. I have even pryed against the tensionor with a blunt heavy bar and moved it enough to free a belt.

Jun 24, 2009 | 1996 Nissan Sentra

2 Answers

How do I release the tension in the serpentine belt?


there is an 8mm bolt right under the alternator. loosen that up then loosen the bolt on the idler pulley and itll come right off

Jun 14, 2009 | 1996 Nissan Sentra

1 Answer

2002 nissan sentra service maitenance


I hope that the timing belt has been replaced or you are living on borrowed time.

Mar 21, 2009 | 2002 Nissan Sentra

1 Answer

How do I locate tension wheel to replace serpntne belts 04 sentra


The serpentine belt runs everyting under the hood...easiest way to locate the tension wheel is to look at every other wheel that the belt runs to.

Your tension wheel will be where the belt runs without being in a V channel, the tension wheel will be flat..no grooves to accomodate the belt.

Hope this helps

Feb 01, 2009 | 2004 Nissan Sentra

1 Answer

Replace timng belt


well maybe there was some mis-communication there , nissan stopped using timing belts in sentra's and actually most all models in 2000 , maybe they were telling you that your serpentine belt needed changed ? but to answer your question , you do not have a timing belt in your 2002 nissan sentra . its a chain . thanks

J5

Jan 19, 2009 | 2002 Nissan Sentra

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...