Question about 1998 Mazda 626

Open Question

Mazda 626 wont start so is there a kill switch on it

Timing belt was broke then replaced but after it was fixed and driven, now it won't start

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 20 Answers

SOURCE: i need the diagram that

THE BEST THING TO DO IS GO TO AUTO ZONE OR ANY PARTS STORE AND PURCHASE A MANUEL FOR THAT VIHICLE COSTS ABOUT 28 DOLLARS WORTH THE WEIGHT IN GOLD

Posted on Oct 25, 2010

Ad
emissionwiz
  • 79865 Answers

SOURCE: Timing Belt 2002 Mazda 626

re-install belt, lining up the timing marks, crank to TDC #1 cylinder, cma pulleys have marks on them, line them up to the index marks as well. If you have a drive wheel in the air, you can pop the car into 5th gear (make sure it's chocked!) and rotate the wheel to turn the engine for alignment, etc. You can put a wrench/socket on the cam bolt to align it as well.

Posted on Aug 08, 2008

  • 65 Answers

SOURCE: 626 won't start no spark

Distributor fault, the coil goes down in tyhem and sometimes pops the ECU.

Posted on Mar 23, 2009

motor1258
  • 6674 Answers

SOURCE: cost to replace waterpump on mazda 626 1996

Go to (repairpal.com) and enter all your info & pick repairs for pricing in your area.

Posted on May 03, 2009

  • 566 Answers

SOURCE: how do you replace the water pump on a 2002 mazda

hi from uk the 626 water pump is not driven by timing belt but by another drive belt so easy to change after removal of under wing cover to access /see pump b4 you remove drive belt would advise you to slacken off the water pump pully 1st while it is held by drive belt to prevent turning ? then with belt off /pully removed pump is more accessable hope this helps?

Posted on Dec 11, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timing belt and sprocket marks on 1995 mazda 626 4 cyl


Check to make sure you are TDC compression stroke on number 1 cylinder.

Mar 26, 2014 | 1995 Mazda 626

1 Answer

Mazda 626 1991 2.2ltr


Just mark the old belt to the gears with liquid paper prior to taking off, transfer marks to new belt & realign marks & it can't be wrong. But still turn motor twice by hand prior to starting just as a precaution to make sure nothing hits ie: pistons / valves

Jun 25, 2012 | Mazda 626 Cars & Trucks

1 Answer

Tiburon timing belt broke, replaced, won't start


Did you make sure you set cam & crank timing ? If the belt is off one tooth it will cause this. Recheck belt timing first.

May 22, 2012 | Hyundai Motor 2000 Tiburon

1 Answer

What's your problem?no power after replacing the timing belt.


If your timing belt broke, then you likely have bent valves that need to be repaired so the head needs to come off znf be sent out to get fixed. If you replaced it as part of routine maintenance, then it's most likely that you are off timing by 1 or 2 teeth. This happens quite often when you tighten the belt tensioner. Realign your timing marks on the crankshaft and see whether the cam marks line up or not. If not loosen the bel, slip it off the cams and turn them into place. It shouldn't be more than 1 tooth. Hope this helps.

Oct 31, 2011 | 1999 Mazda 626

2 Answers

My 2002 Mazda 626 overheated and I've changed the


Think about what your asking & keep in
mind, we don't have the vehicle to check out

Have you done any testing at all, that
you would like to share with us
Like battery,starter solenoid,starter

Does the overheating issue play a role?

Is the timing belt broken?

Jun 17, 2011 | 2002 Mazda 626

1 Answer

Put a new timing belt on, car still wont start.


hi put the #1 piston up with the camshaft lobe up so the valve will seal the compression in the chamber

Mar 26, 2010 | 1989 Mazda 626

1 Answer

How do you replace the water pump on a 2002 mazda 626 4cyl? does it interact with the timing belt?


hi from uk the 626 water pump is not driven by timing belt but by another drive belt so easy to change after removal of under wing cover to access /see pump b4 you remove drive belt would advise you to slacken off the water pump pully 1st while it is held by drive belt to prevent turning ? then with belt off /pully removed pump is more accessable hope this helps?

Dec 11, 2009 | 2002 Mazda 626

1 Answer

Where is the water pump mazda 626 1992 GE


Its under the timing belt cover, driven by the timing belt. Replace the timing belt when you replace the pump. While its apart, replace the cam and crank oil seals, and check the bearing for the tensioner, it will need to be replaced also.

Nov 03, 2009 | 1992 Mazda 626

1 Answer

Timing belt/waterpump


usually a good time to change it is at about 100,000 miles. change it before it becomes a must or not ride(type of thing). if your water pump is run by your timing belt, then yes you should change the water pump when you do the timing belt. the tension from the new belt will sooner than later kill the bearing in the old water pump and it will cost you twice to fix it versus the one time fix. when you go in to the shop there should be no additional cost to replace the timing belt because it has to come off to replace the water pump.

Sep 22, 2008 | 2002 Mazda 626

1 Answer

Please help with my MAZDA 626--1999---2.0


I had a problem something like that and the transmission had went out and also I need a new head gasket i guess because it over heated for some period of time. Be sure he check the thermometer as well before you do some expensive repairs. All of that could contribute to your car overheating

Jul 29, 2008 | 1999 Mazda 626

Not finding what you are looking for?
1998 Mazda 626 Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

79865 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8836 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...