Question about 2003 Mercedes-Benz C-Class

1 Answer

Where is the fuse location for front let headlamp on a mercedes c320 2003

Replaced bulb still not fixed

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 786 Answers

Well on my Cadillac the fuses for the headlights are in the fuse center under the hood of the car. hope this help. If all else fails look in your owners manual it will tell you.

Posted on Jan 19, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

HOW DO I FIND THE FUSE FOR THE RUNNING LIGHTS


Open the hood of your vehicle and disconnect the battery's negative-terminal cable with a socket wrench.
Remove the cover from the fuse block and locate the high-beam headlamp fuse. Most vehicles have two, one for the right headlamp and one for the left headlamp. For the exact location of the fuse, check through your vehicle's user's guide.
Use a fuse puller tool to remove the high-beam headlamp fuse and install a replacement fuse in its place. Reattach the cover to the fuse block.
Reach behind the high-beam headlamp and disconnect its electrical connector by pulling it straight out. Rotate the old bulb counterclockwise and pull it out to remove it.
Install a replacement bulb and reattach the electrical connector to the headlamp. Consult your vehicle's user's guide for the exact type of bulb to use. Close the hood when done.
V15 GDS VCI Diagnostic Tool for Hyundai and Kia

Sep 26, 2014 | Cars & Trucks

Tip

How to change a headlamp in a mercedes benz c280


When changing a headlamp in a mercedes benz c280 1995. Lift the hood latch on the inside of the car. This is located under the driver side of the car. Release the hoodlatch in the front. Open the hood and behind the headlamp (left or right), Remove the two clamps that hold the back cover onto the light. After this cover is removed, behind the headlight there is a wire behind the light that hold the light in. Squeeze the two wires together and pull them back. This will release the light. Remove the light from the socket. Place the new bulb in the socket. Remember not to touch the bulb with your fingers, this could cause the bulb to break if it gets the oil from your fingers onto the bulb. Once the bulb is replaced, put the wire back in place and replace the back cover of the light.

on Nov 27, 2010 | Mercedes-Benz C-Class Cars & Trucks

1 Answer

Left side not working


check the bulbs, check the fuses and check the headlamp relay.
fuses and relays can be found in the Front SAM unit, typically behind the driver's side strutmount inside the engine bay (next to the wiper motor)

Aug 05, 2014 | 2009 Mercedes-Benz E 200

1 Answer

How can I dissasembly headlamp from body


to replace headlight bulbs turn steering so you can open flap in the wheel arch.open flap liner to access of the rear headlight unit.to remove inner bulb in headlight housing remove the air intake duct at front of the air cleaner housing right hand side unclip the wiring harness connector unclip the the left wiring harness connector front of fuse and relay.to remove the dipped beam remove the plastic cover from rear of head light unit.through wheel flap opening. rotate bulbholder anti clockwise to remove bayonet fitting remove headlight bulb. WARNING WEAR CLEAN GLOVES WHEN HANDLING HEADLIGHT HALOGEN BULBS OILS FROM HANDS WILL CAUSE HALOGEN BULB TO OVERHEAT AND BLOW OUT.

Dec 01, 2012 | 2007 Renault Scenic 1.6

1 Answer

How to replace low beam headlamp on mercedes s430


open the hood you will see cables going into the back side of the headlamps through a rubber cover remove the caver and then the cable holder see a clip made of wire carefully see how you can remove it as you have to fix it the same way again now pull the bulb out easily and replace it

Mar 08, 2011 | 2000 Mercedes-Benz S-Class

1 Answer

How to change headlight lamp in 2005 Pontiac g6


To change the bulbs you need to first remove the 5 plastic pop screws on the front bumper. They're spread out at the top of the bumper right under the hood. Once you get those out, you have to remove the two hex bolts on each headlight. Then it gets tricky. You need to pull the light towards the front of the car until it pops out of the ball-bearing type mount on the fender. Once that pops out, you have to pull the front bumper forward while maneuvering the headlight out towards the front.

As per the manual it says as follows:---

Open the hood.

Hold the headlamp to prevent damage to the headlamp or to the fascia. Remove the bolts from the headlamp assembly. Remove the push-in-retainers across the front fascia. Remove the headlamp assembly. Lift the headlamp upward to release the locating tab from the front edge of the fender.

Disconnect the electrical connector from the headlamp assembly.

Remove the headlamp bulb access cover by rotating the headlamp bulb access cover counterclockwise, if necessary.

Remove the headlamp bulb from the housing by rotating the socket counterclockwise, if necessary.

Disconnect the headlamp bulb electrical connector, if necessary.

Remove the park/turn bulb access cover by rotating the cover counterclockwise, if necessary.

Remove the park/turn bulb from the housing by rotating the socket counterclockwise, if necessary.

Gently pull the park/turn bulb from the socket, if necessary. Install the park/turn bulb into the bulb socket.

Install the park/turn bulb socket into the headlamp housing by rotating the socket clockwise.

Install the park/turn bulb access cover by rotating the cover clockwise.

Connect the headlamp bulb to the headlamp electrical connector.

Install the headlamp bulb into the headlamp housing. Rotate the socket clockwise until locked.

Install the headlamp bulb access cover by rotating the cover clockwise.

Position the headlamp assembly to the vehicle. Lift the headlamp upward to release the locating tab to the front edge of the fender.

Install the bolts to the headlamp assembly. Tighten the bolts to 2 N·m (18 lb in).

Install the push-in-retainers across the front fascia.

Close the hood.

----------This will help.thanks.Helpmech.

Dec 25, 2010 | Pontiac G6 Cars & Trucks

2 Answers

Audi A4 2002 Low beams & Right front turn signal stopped working


For Audi A4 the fuse box is located on the left side of dashboard behind a plastic cover (for left hand steering wheel vehicle). On inner face of the plastic cover you will find the fuse diagram.
First fuse on first row from left upper corner is Fuse Nr.20 = F20 (15A) - RH headlamp low beam, headlamp adjustment.
First fuse on second row from left upper corner is Fuse Nr.21 = F21 (15A) - LH headlamp low beam, headlamp adjustment.

Feb 15, 2010 | 2002 Audi A4

1 Answer

How to replace front turn light bulb on Caddy SRX 2004?


  1. Open the hood.
  2. Remove the push-pin retainers that secure the top of the upper fascia and grille assembly to the upper tie bar to allow the upper fascia and grille assembly to flex forward.
  3. Remove the bolt and the push-pin retainer that secures the top of the headlamp assembly to the upper tie bar.
    1. Gently pull the upper fascia and grille assembly forward only far enough to remove the bolt located at the bottom inboard side of the headlamp assembly.
    2. Pull the headlamp assembly straight out to disengage the snap-in retainer at the lower outboard back surface of the assembly. Turn the assembly so that the front inboard corner clears the front fascia.
    3. Pull the headlamp assembly out and away from the vehicle
    4. Disconnect the headlamp electrical connector.
    5. Remove the headlamp assembly from the vehicle.
    6. Remove the headlamp bulb cover from the headlamp assembly.
    7. Remove the headlamp bulb socket from the headlamp assembly.
    8. Remove the headlamp bulb.
    9. Remove the side marker bulb socket from the outer side of the headlamp assembly.
    10. Remove the side marker bulb.

Feb 12, 2009 | 2006 Cadillac SRX

2 Answers

All the gauges stopped working on a 1989 mercedes 300sel and I suspect a relay that is bussing. The part # is 201-821-00-47. The relay is 3 1nches long by 1 1/4 in wide by 2 1/4 in tall.


happened to me the same thing taday on a 1988 190E, just noticed that brake lamps and reverse lamps didn´t work either, fuse was OK but I replaced it anyway and now everything is working fine

Jan 02, 2009 | Mercedes-Benz 300-Class Cars & Trucks

1 Answer

Front right turn signal bulb is burnt out


If you open your hood and look right behind the headlamp assembly you will see a gray release tang for the turn signal housing. Just press the tang and pull out the housing. The socket comes out of the housing with a 1/4 turn counter clockwise. Now replace the bulb. The 2 problems are not related so check your fuses and replace any that are blown. It's a good idea to test the fuses with the key on and all lights turned on with a 12 volt test light and not by eyeballing them.

Jan 01, 2009 | 1994 Mercedes-Benz E-Class

Not finding what you are looking for?
2003 Mercedes-Benz C-Class Logo

89 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76109 Answers

Michael Contreras
Michael Contreras

Level 2 Expert

166 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...