Question about 2006 Dodge Caravan

1 Answer

I have a 2006 Dodge caravan 2.4L engine. Since I changed the timing belt it idles at around 2400 r.p.m.'s ?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Dodge Master
  • 14,337 Answers

You may need DRB scan tool to perform the crankshaft and camshaft relearn alignment procedure.Here's a guide to your belt replacement guide,check to see if you missed something.

Posted on Jan 19, 2013

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

latoss101
  • 47 Answers

SOURCE: Dodge Caravan 2,4l 1997 timing belt change

you will need to change the belt tencioner aswell
if you havent don a cambelt before dont see youre local mechanic ok m8

Posted on Jan 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why 2000 dodge caravan suddenly lost compression on 2.4 engine


Possibly timing belt worn out an jumped time ! How many miles on it ? timing belt should have been replaced around 60,000 miles !

Apr 27, 2015 | 2000 Dodge Caravan

2 Answers

When should i change the timing belt on 2005 dodge caravan 2.4 engine


around 80.000 miles or 6/7 years depending on local climate ,dryier the climate then change it sooner as the rubber dries out

Jun 21, 2011 | 2005 Dodge Caravan

1 Answer

Is a 2006 Dodge grand caravan an interference engine?


I would suspect so as it uses a timing belt rather than a chain. See: http://www.car-stuff.com/store/?N=10121+4294962485+1607+11921+9318

Apr 01, 2011 | 2006 Dodge Grand Caravan

1 Answer

At what mileage should the timing chain be replaced on a 2006 dodge caravan 6 cylinder


around 60,000 no more than a 100,000 belt an tensioner need to be replaced

Dec 20, 2010 | 2006 Dodge Grand Caravan

1 Answer

Replace alternator


The alternator belt on the 1999 Dodge Caravan also controls the air conditioner compressor, the water pump and the power steering pump. The belt is called a serpentine belt, and it is designed to fit around all of the accessory pulleys at the same time. As the belt travels around each accessory pulley, it enables the accessory to operate. Once the belt is damaged, cracked or frayed, you should change it before it breaks. If that happens, each of the accessories will stop working.

Open the hood and prop it up so that it does not fall. Engage the parking brake.

Inspect the top surface of the fan shroud for the serpentine belt routing diagram. Follow the routing instructions on the diagram to install the new belt.

Locate the serpentine belt self-adjusting tensioner on the front of the engine. The tensioner is directly below the alternator. Use the bolt that connects the tensioner pulley to the tensioner arm to rotate the tensioner.

Turn the tensioner device counterclockwise to move the tensioner. This will relieve the tension from the belt. Once the belt has enough slack in it, slide the belt out from under the tensioner pulley.

Lift the belt off each accessory pulley. Slide the belt around the fan blades and out of the engine area.

Lay the old belt next to the new belt to ensure that the new belt is the correct width and length. Slide the belt around the fan blades and around the crankshaft pulley on the bottom of the engine.

Follow the belt routing diagram to position the belt around the air conditioner compressor pulley, the power steering pump pulley, the water pump pulley and the idler pulley. Once the belt is routed inside each accessory pulley, inspect the belt to make sure that it is securely inside the pulleys.

Crank the 1999 Dodge Caravan for 10 to 15 seconds to completely seat the belt ribs in the grooves on each accessory pulley. Shut the engine off and close the hood.

If the belt routing diagram for the 1999 Dodge Caravan is missing, use a pen and a notepad to draw the exact routing of the old belt and use it when installing the new belt.

Nov 26, 2010 | 1999 Dodge Caravan

1 Answer

Which parts must be replaced when changing the timing belt on a 2003 3.3l grand caravan


Your Dodge Grand Caravan 3.3L engine, does not have a timing belt, only timing chain, no replacement mileage time on this engine, gear's are made out of metal. your safe.

Jul 19, 2010 | 2003 Dodge Caravan

2 Answers

2006 Dodge Gr. Caravan. Loud humming noise upon


Misalignment of the belt, incorrect belt, worn or loose tensioner, Too tight of an adjustment (many service centers do this on purpose so when the belt breaks in it becomes properly adjusted, I do not believe in this philosophy), The belt is actually one long belt called a serpentine belt.....

Feb 21, 2010 | 2006 Dodge Grand Caravan

2 Answers

Need serpentine belt routing diagram for 1994 Dodge grand caravan


3.3L?
Looking at the engine from front (right side of the Van): Stating at the Top, Going Left to Right and Clockwise:
Over the Alternator
To under the Idle Pulley,
To Over the AC Compressor.
To the Left Side of the Water Pump.
To the Right side and Under the Crankshaft Pulley
To the Right side and Over and Down the Tensioner
To Under the Power Steering Pump
And Back up-to the Left side of the Alternator.
Advise when puting it on:
Put the Belt around everything else accept for the Alternator. After it is around all the rest of the Pulleys - Pull the belt up - tight from the Power steering Pump and the Idle Pulley to form a loop, holding the Belt close to the Altenator Pulley.
Using the 15mm wrench or belt tensioner bar - rotate the Tensioner Pulley towards the front of the Van and then place the belt over the Alternator.
Let me know if this helped or if you have additional information or questions. Feel free to contact me at FixYa.com!

Jan 21, 2010 | 1994 Dodge Grand Caravan

1 Answer

2006 dodge caravan hesitates


Suggest that you have the FUEL filter and AIR filter changed.
Regards, DT

Aug 28, 2009 | 2006 Dodge Caravan

1 Answer

Dodge Caravan 2,4l 1997 timing belt change


you will need to change the belt tencioner aswell
if you havent don a cambelt before dont see youre local mechanic ok m8

Jan 03, 2009 | 1997 Dodge Grand Caravan

Not finding what you are looking for?
2006 Dodge Caravan Logo

237 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...