Question about 2004 Mazda MPV

2 Answers

Broken exterior door handle,passenger sider ,sliding

How to remove interior door panel?

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Got this idea from mpvclub.com: Get some stainless or aluminum sheet metal screws, drill pilot hole into the handle and into the receiving part behind, then screw in the screw. Do on both sides of handle (get appropriate length screw.) When done, get some putty or hardener to fill in the screw slot, let dry, then sand smooth, then paint with body color. Result is great and inexpensive.

Posted on Jun 25, 2010

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Master
  • 2,035 Answers

Front

  1. Close the front door glass completely.
  2. Disconnect the negative battery cable.
  3. Remove the door screen.
  4. Disconnect the front door lock actuator connector.
  5. Disconnect the rods and the cables.
  6. Remove the screws, and remove the front door lock.
  7. Remove the screws, and remove the front door lock actuator from the front door lock.
  8. To install, reverse removal procedure.
Sliding Door
  1. Close the front door glass completely.
  2. Disconnect the negative battery cable.
  3. Remove the door screen.
  4. Disconnect the sliding door lock actuator connector.
  5. Disconnect the rods and the cables.
  6. Remove the bolts, and remove the sliding door remote controller.
  7. Remove the screws, and remove the sliding door lock actuator from the sliding door remote controller.
  8. To install, reverse removal procedure.

Posted on Jan 26, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I remove the rear sliding door interior panel on 2001 Nissan Quest?


Mostly clips, screws hold the handle on and bezel around it has clips that can carefully be pried off.. A door panel tool should be used to enage and pry panel clips off

Aug 22, 2014 | 2001 Nissan Quest

1 Answer

How do you replace drives side exeior door handel for 95geoprizm


1) Remove the plug inside the interior armrest and remove phillips screw.
2) Remove armrest and two screws that hold door panel to door frame.
3) Pop the outer cover off the interior door handle.
4) Remove the interior lock knob and remove door panel by popping out tabs connected to door frame and lifting up off of window ledge.
5) Remove the two nuts holding exterior handle in place.
6) Disconnect the L shaped linkage from the handle. The trick to getting the L shaped linkage into the new handle is to feed L shaped metal pole through hole in door where exterior handle was, leaving the lower end of this linkage in its slot.
7) Feed the end of L shaped pole through the plastic 'hinge' in new handle by folding the hinge over and pushing the end of the L through both sides of the plastic hinge at once. slide the lower loop of the plastic hinge down the L shaped pole to secure pole to handle.
8) Place new handle into door and reverse the process to reinstall interior panel.

Hope this helps Tim

Apr 17, 2011 | 1995 Geo Prizm

1 Answer

Replacing the exterior front door handle


Door handle fasteners are accessed from inside the doors so you need to remove the interior door panels. The door handles are then usually held on by clips or slides which are rather awkwardly positioned behind the door structure.

Mar 04, 2011 | 1999 Toyota RAV4

1 Answer

The left rear passenger door exterior door handle will not open the door. The interior door handle does work. how do I repair it?


You will need to remove the interior door panel and inspect the linkages. The offending rod should be obvious and loose.

Jan 17, 2010 | 1993 Ford Explorer Limited

1 Answer

How to remove the door screen on 2000 MPV


It appears he tells you to remove the door panel, but doesn't actually explain the process...
On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge.

Sep 22, 2009 | 2004 Mazda MPV

2 Answers

Need instructios to repair 1997 Toyota Camry Broken Exterior Door Handle


Two 10mm bolts, or nuts, hold the handle on from inside the door. dont forget to remove actuating rod from old handle. probably clip is broke also.

May 30, 2009 | 1997 Toyota Camry

1 Answer

Broken door handle - 2001 Nissan Quest SE


first you van order parts at discount from tascafordparts.com.
quest & mecrury villager are the same vehicle made at the same assembly plant. good luck to all. If you were in detroit area, I wold help you.

Trim Panel —Sliding Door Removal
  1. Remove the sliding door trim panel finish panel.
532ac84.gif 2. Remove the sliding door trim panel 2965fbe.gif Latch Remote Control —Sliding Door Removal
  1. Remove the rear sliding door trim panel. For additional information, refer to Section 501-05 .
  1. Position the watershield aside.
  1. If equipped, disconnect the sliding door power door lock actuator electrical connector.
f373e91.gif
  1. NOTE: Mark the position of the sliding door rear latch cable adjusting bracket before removing the bolt.
  2. Disconnect the sliding door rear latch cable.
  3. Remove the bolt.
  4. Remove the sliding door rear latch cable adjusting bracket from the latch remote control.
  5. Disconnect the sliding door rear latch cable from the latch remote control.
b8f2f32.gif
  1. Remove the 4 sliding door front latch bolts.
NOTE: If necessary, transfer parts to the new sliding door latch remote control.
Remove the sliding door latch remote control.
  1. Remove the bolts.
  1. Remove the sliding door latch remote control.
cb5ee71.gif
Handle —Exterior, Sliding Door Removal
  1. Remove the sliding door latch remote control. For additional information, refer to Latch Remote Control—Sliding Door .
  1. Remove the sliding door exterior handle.
    1. Remove the nuts.
    1. Remove the sliding door exterior handle.
0c820f3.gif

Mar 08, 2009 | 2001 Nissan Quest

1 Answer

Diagram for replacing exterior door handles


ok. first u remove the door panel(s), with the window rolled up, u will be able to see the back side of the exterior door handle. there will be three bolts, they are size 10metric. there is also a rod attached to the handle held in place by a plastic clip, remove the rod, then remove the three bolts. from the outside remove the exterior door handle being careful not to scratch painted surface. Repeat for the other door(s). Repeat this for installation.

Dec 14, 2008 | 1997 Toyota Camry

1 Answer

Side sliding door


The trick is that there is a small clip holding the inside handle in place. Push the panel in and grab it with small needle nose or forceps.

Then remove all the interior panels.

There are seven torx screws holding the intern latch into the door frame, and three interconnecting bars between the outer and inner inner handles.

Once you have the ability to move the inner assemble around you can get to the two metric nuts holding the exterior handle.

The lock assembly is removed by depressing the metal latch on the bottom of the handle assemble after the handle is fully removed.

Reverse and replace and that's it. (don't for get to have extra plastic door panel clips as they will break as you remove the interior panels)

Overall - I would suggest to just take it to the dealer or to a body shop. I'm told they would do it for about $75. I took about 2 hrs to do this and if you are even a bit shaky and drop anything into the door, it is game over. Next time I will do the dealer thing.





Oct 30, 2008 | 2003 Chevrolet Express

1 Answer

2001 Nissan Quest - Broken Exterior Sliding Door Handle


you can do this. you have to remove inside trim panel for access. if you still need to do, I will send you repair steps. let me know

Oct 16, 2008 | 2001 Nissan Quest

Not finding what you are looking for?
2004 Mazda MPV Logo

1,620 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

64052 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21990 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...