Question about 2002 Lincoln LS

1 Answer

How do you put a door window back on track - 2002 Lincoln LS

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 22 Answers

You can first try to wiggle gently back onto the track, if not successful, then have some one help you by rolling up the handle, if manual, or push the button, if power, while you hold the glass. If that doesn't do the trick, you'll have to remove the door panel to look inside and see where and what the true problem is.

Posted on Jan 21, 2013

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to I fix a window that won't stay on its track


remove the door panel and inside the door at the bottom of the track you will find a bolt that adjusts the window track position
put the window down as far as possible and adjust the track back tight against the glass and tension up the nut

Jun 23, 2015 | Cars & Trucks

2 Answers

How do i get it back on track


remove innder door panel and carefully put it back on track

Jun 08, 2015 | 1993 Chrysler Imperial

1 Answer

How do I put the driver side power window back on track and the door panel for my 2003 Nissan Altima 3.5SE?


R/R the inner door panel, slide the window back on track, reconnect the window transmission to the window, (or reinstall the trans) bolt everything back together (window motor, window trans to door etc.) Make sure the window is in the UP position. use the switch to raise the window & keep it up if all is back together before finally installing the door panel ( make sure the switch & other plugs are plugged in before the door panel is reinstalled.) Lights etc. Good luck

Sep 14, 2014 | 2003 Nissan Altima

1 Answer

The drivers side window is off the track and now im having problems getting it closed


you can sometimes get it back in by lowering the window all the way down, pry or hold open the felt seals on the door, and look into the door with a flashlight, you might be able to get it back in track by moving the window back and forth (be carefull not to strain glass or it will shatter).. may have to remove door panel to put glass back on track.

Dec 15, 2013 | 2003 Chevrolet Malibu

2 Answers

Window off track of chevy tahoe rear window how do you get it back up


If it is off track just take the inner door panel off and put it back on track. if that don't work replace the broken window regulator and check the window motor to see if it is still good. replace if necessary .

Feb 16, 2013 | 2004 Chevrolet Tahoe

1 Answer

How to put window on passenger side back on track


take the door panel off... put the window in down position... now you should be able to work the window up with your hands and you will be able to see inside the door where the tracks are and where the window needs to go... just line it up in the tracks and let it come down into place... you will need some good adhesive or silicon in the bottom track which holds the window in place and keeps it from being able to get out of the tracks ...put the adhesive in the bottom track before you push the window all the way down into the bottom track... roll up the window all the way but do not roll it down again until the adhesive has had time to dry fully... replace door panel

Mar 25, 2011 | 1995 Oldsmobile Cutlass Ciera

1 Answer

The passenger side window fell into the door and will not go back up. Does this sound like the regulator needs to be replaced? The window is definately is not in it's track anymore. How do I remove the...


Not sure about the odyssey but i own an acura integra (honda). The door panel is held on by about three screws, after you remove thoes start at the bottom of the door and pull out the tabs around the door when the door panel is pulled from the door lift it up and away from the door. (it slids in beside the window) then unplug the electrical connectors and set it aside. I recommend 3M's window weld found at autozone, clean out the window track and glass apply some 3M according to the container and put the window back in the track. Roll the wondow all the way up and leave it closed for atleast 24 hours. Put the door panel back on in reverse order from how it came off.

Jul 07, 2010 | Honda Odyssey Cars & Trucks

1 Answer

Hello my right power window is off track.how hard is it to dismantle and put window back on track.How do i get to the window/glass


You remove the door panel,to get to everything.
You may have to replace the window regulator or cable.
You don't just put it back on track,it broke.
Were long sleeves and thin gloves,to avoid cuts,while working inside the door panel

May 12, 2010 | 1998 Ford Expedition

2 Answers

How do you put rear window back on track for 2005 Highlander?


On the inside trim, you can remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. You'll need to lift the door panel upwards in order to get it off the window ledge. Then you'll need to manipulate the panel and disconnect the door handle linkage from the door handle and disconnect the wiring for your controls. Pull back the weather seal and you can access the window and the track. You may need to purchase some new replacement clips that secure the window onto the track.

Oct 28, 2009 | 2006 Toyota Highlander

2 Answers

I have a 06 saturn ion. my window will go up


towards the back of the door is a short track that runs left to right. there should be a nut either loose or missing on this track. put loctite on the stud, then put the nut back on. do this AFTER the window is back on track.

Apr 22, 2009 | 2006 Saturn ION

Not finding what you are looking for?
2002 Lincoln LS Logo

75 people viewed this question

Ask a Question

Usually answered in minutes!

Top Lincoln Experts

yadayada
yadayada

Level 3 Expert

75117 Answers

fordexpert

Level 3 Expert

5474 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you a Lincoln Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...