Question about 2005 Peugeot 206 1.4

1 Answer

All warning lights staying on

Still running

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Hi mate, You will need to explain in detail things happening and anything and what lights come on as so so many sensors that deal with different faults and even sensors that communicate with each other. just example of o2 oxygen sensors x 4 but all detect completely different engine faults. The more info you can give means a greater chance of diagnostic solution, good luck Robert.
P.S. I advise you to find the reason as even if the engine is running ok now, it might be slowly dying in salience on you!

Posted on Jan 22, 2013

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why would the oil light stay on?


That depends on the type of oil warning light being displayed. There are 2 types of warning lights

1. Low oil pressure light which all cars have
2. low oil level light which some cars have.

Low OIL PRESSURE warning means the oil pressure is below minimum and when this happens there will be insufficient lubrication of many engine parts because sufficient oil cannot get to all parts of the engine it is required to lubricate. Until the cause is identified and rectified the warning light will remain. If you run your engine with low oil pressure you will cause expensive damage to internal engine components.

Low OIL LEVEL warning means the oil in the sump has dropped to a dangerously low level (which may be due to an oil leak or abnormal oil consumption by the engine.) This warning means the oil level needs to be topped up and the warning will stay displayed until you top up the oil. Running the engine with low oil will cause expensive engine damage.
Since it is a 2 minute job, Oil levels should be checked fortnightly as a minimum, together with radiator coolant and power steering fluid levels, if you run the car most days each week as most people do.

It is possible for a warning light to remain displayed when the cause has been dealt with because there is a problem with the sender unit. However it needs to be established with alternative checks that the problem has been fixed before investigating if there is a problem with the warning light itself.

Nov 21, 2015 | Cars & Trucks

2 Answers

Is it normal to have a red triangular warning light come on after pressing the start button and then go off as soon as the other lights(car seat, air bag, break etc) go off..


It's normal. It's part of the instrument cluster module doing what's called a "bulb check" on initial start up, and it should go off in under ten seconds, since it does, there is no problem

Feb 17, 2015 | 2015 Toyota 4Runner

1 Answer

Engine warning light stays on


It's the check engine light..
Take it down to Auto Zone or another auto parts store
And have them check the engine codes.
It could be something like a sensor or something more serious.

Apr 11, 2014 | 2009 Toyota Prius

1 Answer

Why does my traction off light come on?


You either have a problem with your engine control system, the traction control system, or you are not in the correct gear. See the explaination below. This is from the 2000 Chevrolet Cavalier Owner's Manual.

TRAC-OFF LIGHT

... If you turn the system off by moving the shift lever

to FIRST (1) or SECOND (2), the warning light will

come on and stay on. To turn the system back on,

move the shift lever back to a position other than

FIRST (1) or SECOND (2). The warning light

should go off. (See "Enhanced Traction System"

in the Index for more information.)

 The warning light will come on when you set your

parking brake with the engine running, and it will

stay on if your parking brake doesn't release fully.

If the transaxle shift lever is in any position other

than FIRST (1) or SECOND (2) and the warning

light stays on after your parking brake is fully

released, it means there's a problem with the system.

 If the traction control system is affected by an

engine-related problem, the system will turn off

and the warning light will come on.

If the Enhanced Traction System warning light comes

on and stays on for an extended period of time when the

transaxle shift lever is in any position other than FIRST
(1) or SECOND (2) your vehicle needs service.

Aug 08, 2011 | 2000 Chevrolet Cavalier

1 Answer

Left the keys in the ignition adn had AAA jump it. Now the T/C with a slash through it came on and the light that says low engine power. The car starts really rough and has no power when u drive it. WHats...


T/C light = Traction Control

Could be something going on with a wheel speed sensor. You'll have to have the ABS/TCS controller scanned for any stored trouble codes to see why the controller is turning on the light. The code(s) might help you to determine what part of the system is faulting. You'll have to take it to a shop that has a high end scan tool.

If the TC light is on, chances are there is a trouble code set and stored in the computer. You need to determine what the code is. If you take the car to a nationally recognized parts store, most will scan the computer for free, so there is no money out of pocket for you.


Actron also makes a ABS code checker called BrakeScan. Don't know how good it is, but it might be good for a DIY person.

TC Explanation:

If your vehicle is equipped with the Enhanced Traction System (ETS), this warning light should come on briefly as you start the engine. If the warning light does not come on, then have it fixed so it will be ready to warn you if there is a problem.
If the warning light stays on, or comes on when you are driving, there may be a problem with your Enhanced Traction System and your vehicle may need service. When this warning light is on, the system will not limit wheel spin. Adjust your driving accordingly.
The Enhanced Traction System warning light may come on for the following reasons:
If you turn the system off by moving the shift lever to FIRST (1), the warning light will come on and stay on. To turn the system back on, move the shift lever back to a position other than FIRST (1). The warning light should go off. The warning light will come on when you set your parking brake with the engine running, and it will stay on if your parking brake does not release fully. If the transaxle shift lever is in any position other than FIRST (1) and the warning light stays on after your parking brake is fully released, it means there is a problem with the system. If the traction control system is affected by an engine-related problem, the system will turn off and the warning light will come on. If the Enhanced Traction System warning light comes on and stays on for an extended period of time when the transaxle shift lever is in any position other than FIRST (1), your vehicle needs service.


Thanks for using FixYa - a 4 THUMBS rating and POSITIVE TESTIMONIAL are appreciated for answering your FREE question.

Oct 09, 2010 | 2006 Chevrolet Cobalt

2 Answers

Warning light on dash stays on, I don't have a manual to refer to


Your brake light is out.
Check brake lights and repl. burnt light bulb .

Jul 01, 2010 | 1991 Subaru Legacy

2 Answers

96 Corsica hand brake warning light stays on


along with warning that the e-brake is engaged, it's also a waning light that something is wrong with the brake system. however, it may be a defective switch on the e-brake handle. i would have a break check done. also chech the fluid level.

Mar 22, 2010 | 1996 Chevrolet Corsica

1 Answer

Toyota Camry 1991 door light stays on


You need to readjust the switch on your trunk door, or replace. To check it locate it, tape it down with duct tape and see if the light goes off. If not it's bad. If it does it means it isn't sticking out far enough to be turned off when the trunk is closed. The adjusment should be fairly obvious. If not you can simply unplug it which has the same result as turning it off.

May 11, 2009 | 1991 Toyota Celica

Not finding what you are looking for?
2005 Peugeot 206 1.4 Logo

27 people viewed this question

Ask a Question

Usually answered in minutes!

Top Peugeot Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76070 Answers

scj103

Level 2 Expert

81 Answers

Are you a Peugeot Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...