Question about 2008 Ford Escape

Open Question

How do i check epas steering in my 2008 ford escape

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
goofduck
  • 490 Answers

SOURCE: I have a 2005 ford escape.I do not have power

check the belt to make sure it is tight and if it is tight either the pump is out or the rack is bad

Posted on Apr 27, 2009

Ad
  • 84 Answers

SOURCE: ABS & traction control just went out on 2008 Ford Escape.

Chances are it is a bad ABS sensor. Need to get scanned to know for sure and which one.
Not much i know but I hope that helps.

Posted on Feb 03, 2010

Coleman37
  • 337 Answers

SOURCE: 2008 Ford Escape Horn Fuse keeps blowing after

I would trace the wire from the horn and see if it was inadvertently damaged when the alternator was installed. If you have a voltmeter, you can remove the horn fuse and check to see if there is continuity between the horn (non hot side) of the fuse and the car body. This would indicate a short in the wire running from the fuse box to the horn. You can also look around the alternator mounting area to see if any wires are being pinched. Hope this helps. Good luck!

Posted on Mar 10, 2010

Zeevert
  • 373 Answers

SOURCE: 2002 ford escape tie rod squeaks

My outer tie rod did the same thing when just out of warranty. I could tell it was "bad" by putting my hand on the tie rod while someone else turned the steering a little and I could easily feel the vibration.
Check the other side to feel the difference. Tie rods don't cost that much, if you can replace it yourself, and take a chance on foregoing the wheel alignment. Maybe a $150? job at the shop.
In my case, a tie rod was not readily available. I verified that it was a good joint; no shake or rattle. Then I squirted a little WD40 inside the boot, and put it back together. 70,000 miles later, the new tie rod is still on my shelf waiting for the squeak to return.

Posted on Mar 17, 2010

  • 54 Answers

SOURCE: Power steering went out on a 2008 ford escape. How

A few things to check first.
Open your hood and locate the belt that should be connected to pulleys. If missing or damaged you will need to replace the belt. Most important this belt also drives many other components of the car.

The next thing to check is the power steering reservoir. Located as shown in the picture. If there is now fluid in this reservoir than you will need to fill it with power steering fluid. (you can buy this at walmart or any auto parts store)

dustinfull_0.jpg


There is a possibility that if all these things check out ok that the power steering pump has gone bad. Also if you replace the power steering fluid and it leaks runs out again you have a leak somewhere and would need to have a mechanic shop to help locate it.

Posted on Nov 03, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i pull the steering wheel on 2008 ford escape?


Remove the airbag/horn button. Unscrew that big nut in there. Attach a steering wheel puller to the wheel, mark the wheel's position, and crank the wheel off the stem. DO NOT disturb the steering until the wheel is back on, and be careful to align the wheel the same way going on as it was in when it came off.

It's really pretty easy to remove, but it DOES take that puller. The pullers are cheap.

Aug 07, 2014 | 2008 Ford Escape

1 Answer

Where to locate power steering resovoiur


The 2008 s does not have power steering,its the first year Electric Assisted Steering came I believe

Jan 08, 2014 | 2008 Ford Escape

1 Answer

How much will it cost to replace a 2008 ford escape power stearing pump


HAS COLD AND HOT FLUID LEVEL. IF WAS LOW THERE IS A LEAK/SEEP. CHECK STEERING RACK BELLOWS IF WET/DAMP
REMOVE CLAMP AND PUSH BELLOW BACK, IF FLUID IS PRESENT THE STEERING GEAR IS LEAKING.

Dec 27, 2013 | 2008 Ford Escape

1 Answer

Need to know where power steering pump is located in the 2008 Ford Escape


It is the Pump located at the Serpentine belt end of the engine with the large cap on it that says Steering Fluid.

Oct 18, 2012 | 2008 Ford Escape

3 Answers

Power steering went out on a 2008 ford escape. How do I fix it?


2008 escape power steering just went out. Need to know how/ what to get to fix it cheaper then ford dealership. They say I need a steering column

Nov 03, 2010 | 2008 Ford Escape

1 Answer

I can not get the key to turn in the ignition to start the Ford Escape Hybrid


The steering wheel lock may be putting pressure on the lock mechanism. Try turning the steering wheel a little either way as you turn the ignition key.

Sep 29, 2009 | 2008 Ford Escape

Not finding what you are looking for?
2008 Ford Escape Logo

Related Topics:

179 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5530 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...