Question about Cars & Trucks

Open Question

Kx80 top end torque specs - Cars & Trucks

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
toddg
  • 171 Answers

SOURCE: need torque specs

Torque sequence:
Step 1: Torque 29 to 34 Ft/Lbs
Step 2: Torque an additional 90 to 120 degrees

Posted on Oct 14, 2008

Ad
michigan man
  • 3533 Answers

SOURCE: need to know what torque specs for jeep wrangler

try autozone.com to see if they have your car listed for diagrams pictures and step by step instructions if your car is not listed then try your local library they have all the car manuals and even copy them for you

Posted on Mar 20, 2009

  • 22 Answers

SOURCE: pinion nut torque spec chev

Axle Preload and Backlash Specifications 8.0 Axle Preload and Backlash Specifications Application
Specification
Metric
English
Backlash
0.08-0.25 mm
0.003-0.010 in
Backlash (Preferred)
0.13-0.18 mm
0.005-0.007 in
Pinion Bearing Preload, New Bearings
1.7-3.4 N·m
15-30 lb in
Pinion Bearing Preload, Used Bearings
1.1-2.3 N·m
10-20 lb in
Pinion and Differential Case Bearing Preload, New Bearings
3.4-6.2 N·m
30-55 lb in
Pinion and Differential Case Bearing Preload, Used Bearings
2.8-5.1 N·m
25-45 lb in

Posted on May 20, 2009

  • 2002 Answers

SOURCE: torque spec's: 75 nova steering components

I looked in an old Motor book, competitor to Chilton, and it gives no special torques or instructions for front end parts. It just says tighten.From experience I always tightened them with a 3/8 socket wrench until they stopped turning using just my arm strength. Never loosen to put in a cotter pin. Hope this helps.

Posted on Sep 10, 2009

Testimonial: "75 nova dude: problem solved THANKS!! to hippycy"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Torque specs for 5.3 gmc 2002 engine top end


For every torque spec you could possibly need, I love the torkspec website:

http://www.torkspec.com/torkspecme.aspx?KI=12-5.3L-326ci-V8

Mar 13, 2015 | GMC Cars & Trucks

1 Answer

Caliper bolts get loose


the main mounting bolts? not guides?
caliper mount to knuckle bolts?
what torque did you use? in foot/lbs.

  1. id bet they are not factory spec bolts
  2. or you used the wrong torque page.
  3. or your tool is no good. (harbor fright tools?)
use a beam torque tool, it will never fib to you, like cheap clickers do.
I promise.
specs
tighten the caliper pin bolts to 26 ft. lbs. (36 Nm). Bottom bolt
there are 4 bolts specs here.
above pin
banjo 17ft/lbs
top B bolts is 61.5 foot lbs. (this came loose at 61 ?)
C spec is 5ft/lbs on bleeder nipples.

now alternator tack.
the rotor is warped so bad it bead the calipers to death.
the wheel bearing, is so bad , same.

ever check those for run out, and end play?
bingo if true.
damage and collateral damage are limitless.
and rust too. (entropy of all kinds)

Apr 16, 2014 | 2010 Suzuki Grand Vitara

2 Answers

What are the torque specs for the Main Bearing Cap bolts on a 1990 CHEVROLET TRUCK C1500 5.7l 350


main caps 85 ftlbs (3divdedsetings30ftlbs all 50 ftlbs all ending at85ftlbs click, rocaps 45ftlbs, head bolts 85ftlbs workingfrom cdenter top ,center botom ,top center working clock wizeand out ,intake boltes45ftlbs again fromcenter working outleft side, right side,left, right 8 bolts one time only or u will distort gasket. oilpan from center alternate L side ,R side,clock wize25ftlbsclick recheck after breakin period valve covers 25ftlbs anrecheck flywheel 90ftlbs ,harmnic balancer bolt 75ftlbs, add oil!!!!run for 15 minutes drain oil &change filter run for 100miles for molly rings 10 mmiles for cast rings .let engine cool down retorque headbolts,replace valve covers .run it and get on it!!! good luck hve fun.

Aug 20, 2012 | 1990 Chevrolet C1500

1 Answer

I need the torque specs for my rocker arm and push rods i cant find them any were on the internet


THERE IS NO TORQUE SPEC FOR HYDROLIQUE LIFTERS
YOU ADJUST VALVES PER SPECIFICATION USUALLY
TIGHTEN UNTIL NO FREEPLAY BETWEEN LIFTER AND PUSHROD
THEN 1/2 OR 3/4 TURN MORE SO HYDROLIQUE LIFTER CAN PUMP
OIL UP THE PUSHROD TO LUBRICATE TOP END
LOOK UP SPEC TO BE SHURE OF FINAL TURN

Apr 16, 2011 | GMC Sierra 1500 Cars & Trucks

1 Answer

I need the torque specs for my valve covers on my 1990 bronco 2 v-6


No torque specs. Don't use sealer, that can cause the gasket to slip. Put cover in place, start all bolts, loosely snug all, hand tighten from bottom two, top two, bottom ends, top ends. Warm up motor and re-tighten (good hand snug) do not over tighten.

Oct 19, 2010 | 1990 Ford Bronco

3 Answers

Need torque specs


Torque sequence:
Step 1: Torque 29 to 34 Ft/Lbs
Step 2: Torque an additional 90 to 120 degrees

Oct 14, 2008 | 1997 Ford F150 Regular Cab

1 Answer

What are the torque specs for 1990 dodge dakota front suspension.


call carquest or other parts house and ask them for the torque specs or a front end alignment shop.

Sep 24, 2008 | 1990 Dodge Dakota

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

51 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...