Question about 1999 Ford Expedition

Open Question

Need to remove door window sill from ford expedition

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

ilragatzzo78
  • 241 Answers

SOURCE: 99 ford expedition power window

no, you will have to remove the window motor to raise the window up manually.

Posted on May 15, 2008

  • 7 Answers

SOURCE: 2000 ford expedition

you need to use a plastic pry bar to remove the door panel. Also move the speaker grill is available.

Posted on Oct 22, 2008

chuck943
  • 783 Answers

SOURCE: My power window came off track

There are 2 screws just above the door handle you need to remove. Remove the plastic trim around door handle. Then starting at bottom of door panel pull out to disengage the push pin clips and work your way up both sides of panel. Then lift up on door panel to disengage the weatherstip on top of panel.

Posted on Feb 10, 2009

c17hydro
  • 2984 Answers

SOURCE: Looking for a free online repair manual for 2004 Ford Expedition

Pretty simple actually. Sounds retarded but here ya go:

Unscrew all the screws visible. This includes the armrest if applicable.

Get a tool from your local auto parts store that looks like a small pry bar that has a little slot in the middle. it almost looks like the weed puller you use to remove dandelions. Seriously...you'll know it when you see it. This thing is a gem and works on ALL door panels. Slip it inbetween the door panel and the metal part of the door and start popping out the panel. You really want to get behind the plastic fastners if you can. Once you get to panel loose, you want to detach any electrical connectors from the door panel switches.

After that, use a little force to work it upwards to clear the door itself. the seal that is butted up against the glass is sometimes tight.

Do what you need to do and installation is in reverse order.

By the way, that tool is less than $10.00!

Good luck and post if you have any problems.

Posted on Mar 16, 2009

lilward5
  • 5 Answers

SOURCE: how to remove front driver side door panel (2000 ford expedition)

There is a triangular piece, at top corner, covering a screw behind the mirror. Remove that screw. Remove the piece that covers the handle and remove the screw holding the handle to the door. Look through, where door handle was and remove another screw just above where the handle was. This screw is holding the panel to the actual door. Pop the cover off for the automatic door locks and disconnect them. Lift the panel in an upward direction.

Posted on Nov 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to remove passenger door panel on1998 ford expedition


Not off any track

You have a broken window regulator to replace

Try You Tube Video to see if they have door
panel removal

Dec 14, 2012 | 1998 Ford Expedition

1 Answer

Window cable broke so window does not go up and down


The window regulator cable on a Ford Expedition is part of the regulator assembly and is not serviceable separately. Therefore, if your Expedition's window regulator cable incurs damage, you'll need to replace the entire regulator. The cable moves the regulator up or down in response to the window motor. If the cable malfunctions, you won't have command of your Expedition's power window until you replace the regulator. If you have basic auto-repair skills and an hour of free time, you can replace your Expedition's window regulator. Pry the window switch bezel out of the Expedition's door panel using your trim tool. Disconnect the switch from the door harness by hand and set the switch/bezel assembly aside.

  • 2 Remove the hex head screws from the door panel using the Phillips screwdriver. Depending on the year of your Expedition, you may need to remove a trim cover from behind the inner door handle with the trim tool to expose that screw.
  • 3 Lift the door panel up and off the door by hand. If your Expedition has a courtesy light in the lower-trailing edge of the panel, disconnect that light from the door wiring harness before moving the panel away from the door.
  • 4 Push the Expedition's window to the top of the window frame by hand. Tape the glass to the top of the door with packing tape to prevent it from dropping back down.
  • 5 Remove the window regulator mounting bolts with the socket set. Unbolt the regulator from the window glass with the socket set. Pull the old regulator out of the Expedition's door by hand.
  • 6 Set the new window regulator into the Expedition's door by hand. Bolt it in place with the socket set.
  • 7 Reinstall the Expedition's door panel in reverse of how you removed it.
  • Oct 17, 2011 | 1997 Dodge Caravan

    1 Answer

    I need to know how to get the drivers side door panel off. My window is off track and I need to fix


    how to remove door panel on a 97 expedition, pull up on master window switch bezel careful clips break easily and unplug the connectors, remove triangle trim piece top right side of panel pull out then up, screw behind it remove it, remove red lense plastic piece on bottom of door small screw driver careful breaks easily screw behind it remove it, remove bezel around door handle turn it to get off handle screw behnd it remove it, pull straight up on door handle gently then hard if needed, after it is loose from door remove light bulb socket from behind door panel turn it, unplug power window switch.
    thats it reverse to put back on

    Nov 25, 2010 | 1997 Ford Expedition

    1 Answer

    Rear Window failure


    3 routes

    1. Could be a broken wire from the door to the a-pillar in the rubber boot. remove the rubber boot, and run the wires for a brake in them ( missing the return for the door latch switch ).

    2. Problem with the door latch switch, usually the symptom is the door ajar indicator is always on, and dome lamp won't turn off.

    3. A broken wire in the driver's side door sill. This is either towards the front, by the hood latch, or towards the back, where the loom routes up the c-pillar. It will be a single wire spliced to 2 other wires, and it looks like hockey tape is used to cover the splice. Might also have signs of water in the door sill channel.

    Oct 21, 2009 | 2004 Ford F150

    1 Answer

    1997 ford expedition window won't go up... how do


    Remove sail panel cover for mirror, remove screw. Remove window switch cover and remove screw. Remove courtesy lamp lens on door and remove screw. Remove inside door handle trim cover and remove 8mm bolt and handle. Lift upwards and remove door panel.

    Oct 08, 2009 | 1997 Ford Expedition

    1 Answer

    The front driver side door on my 00 expedition


    alot of cars and mount door panels the same ways . if look were fingers grab the door to close it and were arm rests you will see small plastic plugs remove the plugs and you will see screws remove the screws. also were the widow swicth is remove and look behind it . also open door all up and look in door jam for other fasteners when all screws are removed then trie to pull at bottom of panel while pulling look between door and panel some cars pull out and some cars lift up . once u get loose then u lift up to remove from sill of door. then disconnect any electrical connectors. sounds like window linkage hitting door handle linkage inside the door.

    Dec 02, 2008 | 2000 Ford Expedition

    1 Answer

    2000 ford expedition


    you need to use a plastic pry bar to remove the door panel. Also move the speaker grill is available.

    Oct 17, 2008 | 2000 Ford Expedition

    1 Answer

    1999 ford expedition with a passenger, front window stuck in the down possition


    Hi,

    Initially, try to determine which fuse goes to the power window. Check and replace if necessary.

    In brief for a temporary remedy just to have the window closed: remove the triangular cover at the top front of the door behind the mirror, there should be a screw there; remove the trim around the door handle another screw, remove the cover of the courtesy light at the bottom of the door, there is another screw behind that; soon as all the screws are out, lift/push up on the door panel and pull off. This would grant you access to the mechanism controlling the window. You can try closing by manually turning the motor.

    Thereafter, pls determine if it is the motor or the switch(es) has failed. Replacements are available here.

    Incidentally, here is a nice tutorial on repairs of power windows in general.

    Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information.

    Good luck and kind regards.

    Thank you for using FixYa.

    May 31, 2008 | 1999 Ford Expedition

    1 Answer

    99 ford expedition power window


    no, you will have to remove the window motor to raise the window up manually.

    May 15, 2008 | 1999 Ford Expedition

    Not finding what you are looking for?
    1999 Ford Expedition Logo

    Related Topics:

    92 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    75744 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22114 Answers

    fordexpert

    Level 3 Expert

    5495 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...